| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unfortunately, mmrnmhrm has died because of three blown up capacitors
which resulted in hard shut downs due to CPU0 temperature values that
were out of range.
At first I assumed a real temperature problem and thus vacuumed the fan
and everything else, applied new thermal paste and it still failed after
a few minutes. What I found a bit odd was the fact that the machine
powered off even though the last reading of the CPU temperature was 40
degrees Celsius, so that definitly wasn't the problem.
So I went on to look for any blown capacitors on the main board, because
that's probably one of the most frequent cause of hardware failure... at
least for mainboards and monitors. One of the three capacitors I found
to be leaking seems to be leading to the CPU temperature sensor as far
as I can tell (I didn't test with a multimeter though, because I have
lent it out to someone else).
While it shouldn't be hard to fix the blown capacitors (apart from the
fact that we had national holiday during the Easter week), my long-term
goal was to make mmrnmhrm obsolete anyway, so it was a good opportunity
to do exactly that.
The reason why I wanted to get rid of mmrnmhrm was that it has been a
very slow machine since commit 2df7ee103a01da34c9c82235bc286dde35e0f1ba,
which was essentially a hardware downgrade back then.
Dnyarri always has been the better machine hardware-wise but I couldn't
use it to its full potential because it had a cooling issue. The latter
has been resolved a few weeks ago, where I replaced the CPU fan and it's
now not only less noisy but stays at below 50 degrees Celsius even on
high load.
Merging mmrnmhrm into dnyarri also means, that we now have a new disk
layout:
+---------------+--------------+--------------+--------------+
| Disk 1 | Disk 2 | Whole disk 3 | Whole disk 4 |
+---------------+--------------+--------------+--------------+
| EFI partition | crypt-vault | crypt-root-3 | crypt-root-4 |
| crypt-swap-1 | crypt-swap-2 +-----------------------------+
| crypt-root-1 | crypt-root-2 |
+---------------+--------------+
Disk 1 and 2 use GUID partitions while disk 3 and 4 don't have a
partition table but use btrfs across the whole device. The crypt-vault
partition is solely for unlocking other crypto volumes so that a single
passphrase unlocks all of the LUKS containers rather than needing to
provide 6 passphrases.
Also, I've migrated to using UEFI for booting, which is why there now is
an EFI partition as well. Having no redundancy on the EFI and the
crypt-vault partitions doesn't hurt so much because in the event of
drive failure all of the containers can still be unlocked via a
passphrase instead of the vault key.
Disk 3 and 4 are the disks that were formerly installed into mmrnmhrm
and now comprise one big btrfs volume together with the two disks (1 and
2) already present inside dnyarri.
Instead of RAID1 on data and metadata, the btrfs file system layout now
is RAID10 for data and metadata.
This merge also removes synergy for obvious reasons (no other machine
anymore) and disables kmscon because it was just a test in the first
place and I found it a bit annoying to work with.
Summary: Mmrnmhrm is (are?) dead, long live dnyarri!
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
| |
webkitgtk-2.4.11 is insecure, I am whitelisting it for now to fix the
evaluation errors on the hydra.
Consider, what you want to do on the issue long term, or just revert
this commit as soon as the CVEs are fixed upstream, @aszlig!
|
| |
|
|
|
|
|
|
|
|
|
| |
I now prefer to explicitly state the function along with the "lib."
namespace instead of making it available over the whole scope of the
module.
One of the main reasons for this is that you can do early error checking
with nix-instantiate --parse.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
| |
This is needed mostly for the GPUs and for KMS to hopefully work.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I've been patching these machines up since ages and I'm tired now to do
both kernel configs *again* for the recent kernel versions.
Of course, in the long run I still want them to have their customized
kernel, but right now it's better to have a recent generic kernel rather
than have a fucked up custom kernel.
Also, this removes all that cruft for the Intel HDA pinning on dnyarri,
because the machine now has two X-Fi sound cards.
Both machines probably won't boot now, so we'll have to adjust a few
things very soon.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
|
| |
We had this since NixOS/nixpkgs@3c5fca9 and since the merge of master
into closure-size (NixOS/nixpkgs@d039c87) we also have it there, so
there is no excuse now to not switch to lists, especially because we
already used concatStringsSep on lists anyway.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
|
| |
Having to switch keyboards when I have my laptop at home is quite
annoying, so let's add the laptop (tishtushi) to the synergy config but
without setting a mouse region so it won't get more annoying than
switching keyboards ;-)
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
|
| |
Having Menu/AudioPlay used for synergy isn't really a very good idea if
some applications actually use those keys, so let's move on to a similar
scheme as with my i3 config and use function keys to not collide with
Super+1, Super+2, ...
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
| |
I'm going to remove legacy fbdev support from the kernel configurations,
so in order to still have terminals besides the X server we need to
enable this (also, kmscon allows more eyecandy if we want that).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This means, we don't have that lib directory anymore and also we're not
doing text substitution on the kernel config but instead override the
original attributes.
However, this needs to be refactored even further, so we can use the
NixOS kernel system, which allows for certain modules to require
specific kernel features. That way we can automatically create a kernel
config from the list of required features and we only need to set a
specific base config instead of specifying the *full* kernel config.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
| |
Thus we now got rid of the cfgfiles directory, especially because the
Synergy server config file is rather small, so inlining makes sense
here.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Both files are specific to my machines only and need to be generalized
in order to be useful for anyone else.
Moving these files has a few other censequences, such that we now need
to automatically import the module-list.nix in callMachine.
Speaking of module-list.nix, the file is now alphabetically sorted.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
|
|
| |
So far the modules were still using the old naming scheme of
vuizvui.name where name is the corresponding module name directly
instead of the category.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
| |
|
|
|
|
| |
Whoops, forgot about this one in 2b8256b.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
|
|
Introduces callMachine in machines/default.nix, which returns an
attribute set containing the (input) configuration and also a build
attribute containing the output configuration and thus also the builds.
However, we still have references to ../../common-workstation.nix which
we need to refactor very soon.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
|
