path: root/modules/user/aszlig/system/bfq.patch

diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
index e55103ace382..8d55b4bbb5e2 100644
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@@ -1,5 +1,7 @@
 00-INDEX
 	- This file
+bfq-iosched.txt
+	- BFQ IO scheduler and its tunables
 biodoc.txt
 	- Notes on the Generic Block Layer Rewrite in Linux 2.5
 biovecs.txt
diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.txt
new file mode 100644
index 000000000000..13b5248eba7e
--- /dev/null
+++ b/Documentation/block/bfq-iosched.txt
@@ -0,0 +1,530 @@
+BFQ (Budget Fair Queueing)
+==========================
+
+BFQ is a proportional-share I/O scheduler, with some extra
+low-latency capabilities. In addition to cgroups support (blkio or io
+controllers), BFQ's main features are:
+- BFQ guarantees a high system and application responsiveness, and a
+  low latency for time-sensitive applications, such as audio or video
+  players;
+- BFQ distributes bandwidth, and not just time, among processes or
+  groups (switching back to time distribution when needed to keep
+  throughput high).
+
+On average CPUs, the current version of BFQ can handle devices
+performing at most ~30K IOPS; at most ~50 KIOPS on faster CPUs. As a
+reference, 30-50 KIOPS correspond to very high bandwidths with
+sequential I/O (e.g., 8-12 GB/s if I/O requests are 256 KB large), and
+to 120-200 MB/s with 4KB random I/O.
+
+The table of contents follow. Impatients can just jump to Section 3.
+
+CONTENTS
+
+1. When may BFQ be useful?
+ 1-1 Personal systems
+ 1-2 Server systems
+2. How does BFQ work?
+3. What are BFQ's tunable?
+4. BFQ group scheduling
+ 4-1 Service guarantees provided
+ 4-2 Interface
+
+1. When may BFQ be useful?
+==========================
+
+BFQ provides the following benefits on personal and server systems.
+
+1-1 Personal systems
+--------------------
+
+Low latency for interactive applications
+
+Regardless of the actual background workload, BFQ guarantees that, for
+interactive tasks, the storage device is virtually as responsive as if
+it was idle. For example, even if one or more of the following
+background workloads are being executed:
+- one or more large files are being read, written or copied,
+- a tree of source files is being compiled,
+- one or more virtual machines are performing I/O,
+- a software update is in progress,
+- indexing daemons are scanning filesystems and updating their
+  databases,
+starting an application or loading a file from within an application
+takes about the same time as if the storage device was idle. As a
+comparison, with CFQ, NOOP or DEADLINE, and in the same conditions,
+applications experience high latencies, or even become unresponsive
+until the background workload terminates (also on SSDs).
+
+Low latency for soft real-time applications
+
+Also soft real-time applications, such as audio and video
+players/streamers, enjoy a low latency and a low drop rate, regardless
+of the background I/O workload. As a consequence, these applications
+do not suffer from almost any glitch due to the background workload.
+
+Higher speed for code-development tasks
+
+If some additional workload happens to be executed in parallel, then
+BFQ executes the I/O-related components of typical code-development
+tasks (compilation, checkout, merge, ...) much more quickly than CFQ,
+NOOP or DEADLINE.
+
+High throughput
+
+On hard disks, BFQ achieves up to 30% higher throughput than CFQ, and
+up to 150% higher throughput than DEADLINE and NOOP, with all the
+sequential workloads considered in our tests. With random workloads,
+and with all the workloads on flash-based devices, BFQ achieves,
+instead, about the same throughput as the other schedulers.
+
+Strong fairness, bandwidth and delay guarantees
+
+BFQ distributes the device throughput, and not just the device time,
+among I/O-bound applications in proportion their weights, with any
+workload and regardless of the device parameters. From these bandwidth
+guarantees, it is possible to compute tight per-I/O-request delay
+guarantees by a simple formula. If not configured for strict service
+guarantees, BFQ switches to time-based resource sharing (only) for
+applications that would otherwise cause a throughput loss.
+
+1-2 Server systems
+------------------
+
+Most benefits for server systems follow from the same service
+properties as above. In particular, regardless of whether additional,
+possibly heavy workloads are being served, BFQ guarantees:
+
+. audio and video-streaming with zero or very low jitter and drop
+  rate;
+
+. fast retrieval of WEB pages and embedded objects;
+
+. real-time recording of data in live-dumping applications (e.g.,
+  packet logging);
+
+. responsiveness in local and remote access to a server.
+
+
+2. How does BFQ work?
+=====================
+
+BFQ is a proportional-share I/O scheduler, whose general structure,
+plus a lot of code, are borrowed from CFQ.
+
+- Each process doing I/O on a device is associated with a weight and a
+  (bfq_)queue.
+
+- BFQ grants exclusive access to the device, for a while, to one queue
+  (process) at a time, and implements this service model by
+  associating every queue with a budget, measured in number of
+  sectors.
+
+  - After a queue is granted access to the device, the budget of the
+    queue is decremented, on each request dispatch, by the size of the
+    request.
+
+  - The in-service queue is expired, i.e., its service is suspended,
+    only if one of the following events occurs: 1) the queue finishes
+    its budget, 2) the queue empties, 3) a "budget timeout" fires.
+
+    - The budget timeout prevents processes doing random I/O from
+      holding the device for too long and dramatically reducing
+      throughput.
+
+    - Actually, as in CFQ, a queue associated with a process issuing
+      sync requests may not be expired immediately when it empties. In
+      contrast, BFQ may idle the device for a short time interval,
+      giving the process the chance to go on being served if it issues
+      a new request in time. Device idling typically boosts the
+      throughput on rotational devices, if processes do synchronous
+      and sequential I/O. In addition, under BFQ, device idling is
+      also instrumental in guaranteeing the desired throughput
+      fraction to processes issuing sync requests (see the description
+      of the slice_idle tunable in this document, or [1, 2], for more
+      details).
+
+      - With respect to idling for service guarantees, if several
+	processes are competing for the device at the same time, but
+	all processes (and groups, after the following commit) have
+	the same weight, then BFQ guarantees the expected throughput
+	distribution without ever idling the device. Throughput is
+	thus as high as possible in this common scenario.
+
+  - If low-latency mode is enabled (default configuration), BFQ
+    executes some special heuristics to detect interactive and soft
+    real-time applications (e.g., video or audio players/streamers),
+    and to reduce their latency. The most important action taken to
+    achieve this goal is to give to the queues associated with these
+    applications more than their fair share of the device
+    throughput. For brevity, we call just "weight-raising" the whole
+    sets of actions taken by BFQ to privilege these queues. In
+    particular, BFQ provides a milder form of weight-raising for
+    interactive applications, and a stronger form for soft real-time
+    applications.
+
+  - BFQ automatically deactivates idling for queues born in a burst of
+    queue creations. In fact, these queues are usually associated with
+    the processes of applications and services that benefit mostly
+    from a high throughput. Examples are systemd during boot, or git
+    grep.
+
+  - As CFQ, BFQ merges queues performing interleaved I/O, i.e.,
+    performing random I/O that becomes mostly sequential if
+    merged. Differently from CFQ, BFQ achieves this goal with a more
+    reactive mechanism, called Early Queue Merge (EQM). EQM is so
+    responsive in detecting interleaved I/O (cooperating processes),
+    that it enables BFQ to achieve a high throughput, by queue
+    merging, even for queues for which CFQ needs a different
+    mechanism, preemption, to get a high throughput. As such EQM is a
+    unified mechanism to achieve a high throughput with interleaved
+    I/O.
+
+  - Queues are scheduled according to a variant of WF2Q+, named
+    B-WF2Q+, and implemented using an augmented rb-tree to preserve an
+    O(log N) overall complexity.  See [2] for more details. B-WF2Q+ is
+    also ready for hierarchical scheduling. However, for a cleaner
+    logical breakdown, the code that enables and completes
+    hierarchical support is provided in the next commit, which focuses
+    exactly on this feature.
+
+  - B-WF2Q+ guarantees a tight deviation with respect to an ideal,
+    perfectly fair, and smooth service. In particular, B-WF2Q+
+    guarantees that each queue receives a fraction of the device
+    throughput proportional to its weight, even if the throughput
+    fluctuates, and regardless of: the device parameters, the current
+    workload and the budgets assigned to the queue.
+
+  - The last, budget-independence, property (although probably
+    counterintuitive in the first place) is definitely beneficial, for
+    the following reasons:
+
+    - First, with any proportional-share scheduler, the maximum
+      deviation with respect to an ideal service is proportional to
+      the maximum budget (slice) assigned to queues. As a consequence,
+      BFQ can keep this deviation tight not only because of the
+      accurate service of B-WF2Q+, but also because BFQ *does not*
+      need to assign a larger budget to a queue to let the queue
+      receive a higher fraction of the device throughput.
+
+    - Second, BFQ is free to choose, for every process (queue), the
+      budget that best fits the needs of the process, or best
+      leverages the I/O pattern of the process. In particular, BFQ
+      updates queue budgets with a simple feedback-loop algorithm that
+      allows a high throughput to be achieved, while still providing
+      tight latency guarantees to time-sensitive applications. When
+      the in-service queue expires, this algorithm computes the next
+      budget of the queue so as to:
+
+      - Let large budgets be eventually assigned to the queues
+	associated with I/O-bound applications performing sequential
+	I/O: in fact, the longer these applications are served once
+	got access to the device, the higher the throughput is.
+
+      - Let small budgets be eventually assigned to the queues
+	associated with time-sensitive applications (which typically
+	perform sporadic and short I/O), because, the smaller the
+	budget assigned to a queue waiting for service is, the sooner
+	B-WF2Q+ will serve that queue (Subsec 3.3 in [2]).
+
+- If several processes are competing for the device at the same time,
+  but all processes and groups have the same weight, then BFQ
+  guarantees the expected throughput distribution without ever idling
+  the device. It uses preemption instead. Throughput is then much
+  higher in this common scenario.
+
+- ioprio classes are served in strict priority order, i.e.,
+  lower-priority queues are not served as long as there are
+  higher-priority queues.  Among queues in the same class, the
+  bandwidth is distributed in proportion to the weight of each
+  queue. A very thin extra bandwidth is however guaranteed to
+  the Idle class, to prevent it from starving.
+
+
+3. What are BFQ's tunable?
+==========================
+
+The tunables back_seek-max, back_seek_penalty, fifo_expire_async and
+fifo_expire_sync below are the same as in CFQ. Their description is
+just copied from that for CFQ. Some considerations in the description
+of slice_idle are copied from CFQ too.
+
+per-process ioprio and weight
+-----------------------------
+
+Unless the cgroups interface is used (see "4. BFQ group scheduling"),
+weights can be assigned to processes only indirectly, through I/O
+priorities, and according to the relation:
+weight = (IOPRIO_BE_NR - ioprio) * 10.
+
+Beware that, if low-latency is set, then BFQ automatically raises the
+weight of the queues associated with interactive and soft real-time
+applications. Unset this tunable if you need/want to control weights.
+
+slice_idle
+----------
+
+This parameter specifies how long BFQ should idle for next I/O
+request, when certain sync BFQ queues become empty. By default
+slice_idle is a non-zero value. Idling has a double purpose: boosting
+throughput and making sure that the desired throughput distribution is
+respected (see the description of how BFQ works, and, if needed, the
+papers referred there).
+
+As for throughput, idling can be very helpful on highly seeky media
+like single spindle SATA/SAS disks where we can cut down on overall
+number of seeks and see improved throughput.
+
+Setting slice_idle to 0 will remove all the idling on queues and one
+should see an overall improved throughput on faster storage devices
+like multiple SATA/SAS disks in hardware RAID configuration.
+
+So depending on storage and workload, it might be useful to set
+slice_idle=0.  In general for SATA/SAS disks and software RAID of
+SATA/SAS disks keeping slice_idle enabled should be useful. For any
+configurations where there are multiple spindles behind single LUN
+(Host based hardware RAID controller or for storage arrays), setting
+slice_idle=0 might end up in better throughput and acceptable
+latencies.
+
+Idling is however necessary to have service guarantees enforced in
+case of differentiated weights or differentiated I/O-request lengths.
+To see why, suppose that a given BFQ queue A must get several I/O
+requests served for each request served for another queue B. Idling
+ensures that, if A makes a new I/O request slightly after becoming
+empty, then no request of B is dispatched in the middle, and thus A
+does not lose the possibility to get more than one request dispatched
+before the next request of B is dispatched. Note that idling
+guarantees the desired differentiated treatment of queues only in
+terms of I/O-request dispatches. To guarantee that the actual service
+order then corresponds to the dispatch order, the strict_guarantees
+tunable must be set too.
+
+There is an important flipside for idling: apart from the above cases
+where it is beneficial also for throughput, idling can severely impact
+throughput. One important case is random workload. Because of this
+issue, BFQ tends to avoid idling as much as possible, when it is not
+beneficial also for throughput. As a consequence of this behavior, and
+of further issues described for the strict_guarantees tunable,
+short-term service guarantees may be occasionally violated. And, in
+some cases, these guarantees may be more important than guaranteeing
+maximum throughput. For example, in video playing/streaming, a very
+low drop rate may be more important than maximum throughput. In these
+cases, consider setting the strict_guarantees parameter.
+
+strict_guarantees
+-----------------
+
+If this parameter is set (default: unset), then BFQ
+
+- always performs idling when the in-service queue becomes empty;
+
+- forces the device to serve one I/O request at a time, by dispatching a
+  new request only if there is no outstanding request.
+
+In the presence of differentiated weights or I/O-request sizes, both
+the above conditions are needed to guarantee that every BFQ queue
+receives its allotted share of the bandwidth. The first condition is
+needed for the reasons explained in the description of the slice_idle
+tunable.  The second condition is needed because all modern storage
+devices reorder internally-queued requests, which may trivially break
+the service guarantees enforced by the I/O scheduler.
+
+Setting strict_guarantees may evidently affect throughput.
+
+back_seek_max
+-------------
+
+This specifies, given in Kbytes, the maximum "distance" for backward seeking.
+The distance is the amount of space from the current head location to the
+sectors that are backward in terms of distance.
+
+This parameter allows the scheduler to anticipate requests in the "backward"
+direction and consider them as being the "next" if they are within this
+distance from the current head location.
+
+back_seek_penalty
+-----------------
+
+This parameter is used to compute the cost of backward seeking. If the
+backward distance of request is just 1/back_seek_penalty from a "front"
+request, then the seeking cost of two requests is considered equivalent.
+
+So scheduler will not bias toward one or the other request (otherwise scheduler
+will bias toward front request). Default value of back_seek_penalty is 2.
+
+fifo_expire_async
+-----------------
+
+This parameter is used to set the timeout of asynchronous requests. Default
+value of this is 248ms.
+
+fifo_expire_sync
+----------------
+
+This parameter is used to set the timeout of synchronous requests. Default
+value of this is 124ms. In case to favor synchronous requests over asynchronous
+one, this value should be decreased relative to fifo_expire_async.
+
+low_latency
+-----------
+
+This parameter is used to enable/disable BFQ's low latency mode. By
+default, low latency mode is enabled. If enabled, interactive and soft
+real-time applications are privileged and experience a lower latency,
+as explained in more detail in the description of how BFQ works.
+
+DO NOT enable this mode if you need full control on bandwidth
+distribution. In fact, if it is enabled, then BFQ automatically
+increases the bandwidth share of privileged applications, as the main
+means to guarantee a lower latency to them.
+
+timeout_sync
+------------
+
+Maximum amount of device time that can be given to a task (queue) once
+it has been selected for service. On devices with costly seeks,
+increasing this time usually increases maximum throughput. On the
+opposite end, increasing this time coarsens the granularity of the
+short-term bandwidth and latency guarantees, especially if the
+following parameter is set to zero.
+
+max_budget
+----------
+
+Maximum amount of service, measured in sectors, that can be provided
+to a BFQ queue once it is set in service (of course within the limits
+of the above timeout). According to what said in the description of
+the algorithm, larger values increase the throughput in proportion to
+the percentage of sequential I/O requests issued. The price of larger
+values is that they coarsen the granularity of short-term bandwidth
+and latency guarantees.
+
+The default value is 0, which enables auto-tuning: BFQ sets max_budget
+to the maximum number of sectors that can be served during
+timeout_sync, according to the estimated peak rate.
+
+weights
+-------
+
+Read-only parameter, used to show the weights of the currently active
+BFQ queues.
+
+
+wr_ tunables
+------------
+
+BFQ exports a few parameters to control/tune the behavior of
+low-latency heuristics.
+
+wr_coeff
+
+Factor by which the weight of a weight-raised queue is multiplied. If
+the queue is deemed soft real-time, then the weight is further
+multiplied by an additional, constant factor.
+
+wr_max_time
+
+Maximum duration of a weight-raising period for an interactive task
+(ms). If set to zero (default value), then this value is computed
+automatically, as a function of the peak rate of the device. In any
+case, when the value of this parameter is read, it always reports the
+current duration, regardless of whether it has been set manually or
+computed automatically.
+
+wr_max_softrt_rate
+
+Maximum service rate below which a queue is deemed to be associated
+with a soft real-time application, and is then weight-raised
+accordingly (sectors/sec).
+
+wr_min_idle_time
+
+Minimum idle period after which interactive weight-raising may be
+reactivated for a queue (in ms).
+
+wr_rt_max_time
+
+Maximum weight-raising duration for soft real-time queues (in ms). The
+start time from which this duration is considered is automatically
+moved forward if the queue is detected to be still soft real-time
+before the current soft real-time weight-raising period finishes.
+
+wr_min_inter_arr_async
+
+Minimum period between I/O request arrivals after which weight-raising
+may be reactivated for an already busy async queue (in ms).
+
+
+4. Group scheduling with BFQ
+============================
+
+BFQ supports both cgroups-v1 and cgroups-v2 io controllers, namely
+blkio and io. In particular, BFQ supports weight-based proportional
+share. To activate cgroups support, set BFQ_GROUP_IOSCHED.
+
+4-1 Service guarantees provided
+-------------------------------
+
+With BFQ, proportional share means true proportional share of the
+device bandwidth, according to group weights. For example, a group
+with weight 200 gets twice the bandwidth, and not just twice the time,
+of a group with weight 100.
+
+BFQ supports hierarchies (group trees) of any depth. Bandwidth is
+distributed among groups and processes in the expected way: for each
+group, the children of the group share the whole bandwidth of the
+group in proportion to their weights. In particular, this implies
+that, for each leaf group, every process of the group receives the
+same share of the whole group bandwidth, unless the ioprio of the
+process is modified.
+
+The resource-sharing guarantee for a group may partially or totally
+switch from bandwidth to time, if providing bandwidth guarantees to
+the group lowers the throughput too much. This switch occurs on a
+per-process basis: if a process of a leaf group causes throughput loss
+if served in such a way to receive its share of the bandwidth, then
+BFQ switches back to just time-based proportional share for that
+process.
+
+4-2 Interface
+-------------
+
+To get proportional sharing of bandwidth with BFQ for a given device,
+BFQ must of course be the active scheduler for that device.
+
+Within each group directory, the names of the files associated with
+BFQ-specific cgroup parameters and stats begin with the "bfq."
+prefix. So, with cgroups-v1 or cgroups-v2, the full prefix for
+BFQ-specific files is "blkio.bfq." or "io.bfq." For example, the group
+parameter to set the weight of a group with BFQ is blkio.bfq.weight
+or io.bfq.weight.
+
+Parameters to set
+-----------------
+
+For each group, there is only the following parameter to set.
+
+weight (namely blkio.bfq.weight or io.bfq-weight): the weight of the
+group inside its parent. Available values: 1..10000 (default 100). The
+linear mapping between ioprio and weights, described at the beginning
+of the tunable section, is still valid, but all weights higher than
+IOPRIO_BE_NR*10 are mapped to ioprio 0.
+
+Recall that, if low-latency is set, then BFQ automatically raises the
+weight of the queues associated with interactive and soft real-time
+applications. Unset this tunable if you need/want to control weights.
+
+
+[1] P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O
+    Scheduler", Proceedings of the First Workshop on Mobile System
+    Technologies (MST-2015), May 2015.
+    http://algogroup.unimore.it/people/paolo/disk_sched/mst-2015.pdf
+
+[2] P. Valente and M. Andreolini, "Improving Application
+    Responsiveness with the BFQ Disk I/O Scheduler", Proceedings of
+    the 5th Annual International Systems and Storage Conference
+    (SYSTOR '12), June 2012.
+    Slightly extended version:
+    http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-
+							results.pdf
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index 58fc8684788d..99a42261677a 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -39,6 +39,25 @@ config CFQ_GROUP_IOSCHED
 	---help---
 	  Enable group IO scheduling in CFQ.
 
+config IOSCHED_BFQ
+	tristate "BFQ I/O scheduler"
+	default n
+	---help---
+	The BFQ I/O scheduler distributes bandwidth among all
+	processes according to their weights, regardless of the
+	device parameters and with any workload. It also guarantees
+	a low latency to interactive and soft real-time applications.
+	Details in Documentation/block/bfq-iosched.txt
+
+config BFQ_GROUP_IOSCHED
+	bool "BFQ hierarchical scheduling support"
+	depends on IOSCHED_BFQ && BLK_CGROUP
+	default n
+	---help---
+
+	Enable hierarchical scheduling in BFQ, using the blkio
+	(cgroups-v1) or io (cgroups-v2) controller.
+
 choice
 	prompt "Default I/O scheduler"
 	default DEFAULT_CFQ
@@ -52,6 +71,16 @@ choice
 	config DEFAULT_CFQ
 		bool "CFQ" if IOSCHED_CFQ=y
 
+	config DEFAULT_BFQ
+		bool "BFQ" if IOSCHED_BFQ=y
+		help
+		  Selects BFQ as the default I/O scheduler which will be
+		  used by default for all block devices.
+		  The BFQ I/O scheduler aims at distributing the bandwidth
+		  as desired, independently of the disk parameters and with
+		  any workload. It also tries to guarantee low latency to
+		  interactive and soft real-time applications.
+
 	config DEFAULT_NOOP
 		bool "No-op"
 
@@ -61,6 +90,7 @@ config DEFAULT_IOSCHED
 	string
 	default "deadline" if DEFAULT_DEADLINE
 	default "cfq" if DEFAULT_CFQ
+	default "bfq" if DEFAULT_BFQ
 	default "noop" if DEFAULT_NOOP
 
 config MQ_IOSCHED_DEADLINE
diff --git a/block/Makefile b/block/Makefile
index 081bb680789b..6defc8b5dca0 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_BLK_DEV_THROTTLING)	+= blk-throttle.o
 obj-$(CONFIG_IOSCHED_NOOP)	+= noop-iosched.o
 obj-$(CONFIG_IOSCHED_DEADLINE)	+= deadline-iosched.o
 obj-$(CONFIG_IOSCHED_CFQ)	+= cfq-iosched.o
+obj-$(CONFIG_IOSCHED_BFQ)	+= bfq-iosched.o
 obj-$(CONFIG_MQ_IOSCHED_DEADLINE)	+= mq-deadline.o
 
 obj-$(CONFIG_BLOCK_COMPAT)	+= compat_ioctl.o
diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c
new file mode 100644
index 000000000000..c59227288ae0
--- /dev/null
+++ b/block/bfq-cgroup.c
@@ -0,0 +1,1194 @@
+/*
+ * BFQ: CGROUPS support.
+ *
+ * Based on ideas and code from CFQ:
+ * Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
+ *
+ * Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
+ *		      Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
+ *
+ * Licensed under the GPL-2 as detailed in the accompanying COPYING.BFQ
+ * file.
+ */
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+
+/* bfqg stats flags */
+enum bfqg_stats_flags {
+	BFQG_stats_waiting = 0,
+	BFQG_stats_idling,
+	BFQG_stats_empty,
+};
+
+#define BFQG_FLAG_FNS(name)						\
+static void bfqg_stats_mark_##name(struct bfqg_stats *stats)	\
+{									\
+	stats->flags |= (1 << BFQG_stats_##name);			\
+}									\
+static void bfqg_stats_clear_##name(struct bfqg_stats *stats)	\
+{									\
+	stats->flags &= ~(1 << BFQG_stats_##name);			\
+}									\
+static int bfqg_stats_##name(struct bfqg_stats *stats)		\
+{									\
+	return (stats->flags & (1 << BFQG_stats_##name)) != 0;		\
+}									\
+
+BFQG_FLAG_FNS(waiting)
+BFQG_FLAG_FNS(idling)
+BFQG_FLAG_FNS(empty)
+#undef BFQG_FLAG_FNS
+
+/* This should be called with the queue_lock held. */
+static void bfqg_stats_update_group_wait_time(struct bfqg_stats *stats)
+{
+	unsigned long long now;
+
+	if (!bfqg_stats_waiting(stats))
+		return;
+
+	now = sched_clock();
+	if (time_after64(now, stats->start_group_wait_time))
+		blkg_stat_add(&stats->group_wait_time,
+			      now - stats->start_group_wait_time);
+	bfqg_stats_clear_waiting(stats);
+}
+
+/* This should be called with the queue_lock held. */
+static void bfqg_stats_set_start_group_wait_time(struct bfq_group *bfqg,
+						 struct bfq_group *curr_bfqg)
+{
+	struct bfqg_stats *stats = &bfqg->stats;
+
+	if (bfqg_stats_waiting(stats))
+		return;
+	if (bfqg == curr_bfqg)
+		return;
+	stats->start_group_wait_time = sched_clock();
+	bfqg_stats_mark_waiting(stats);
+}
+
+/* This should be called with the queue_lock held. */
+static void bfqg_stats_end_empty_time(struct bfqg_stats *stats)
+{
+	unsigned long long now;
+
+	if (!bfqg_stats_empty(stats))
+		return;
+
+	now = sched_clock();
+	if (time_after64(now, stats->start_empty_time))
+		blkg_stat_add(&stats->empty_time,
+			      now - stats->start_empty_time);
+	bfqg_stats_clear_empty(stats);
+}
+
+static void bfqg_stats_update_dequeue(struct bfq_group *bfqg)
+{
+	blkg_stat_add(&bfqg->stats.dequeue, 1);
+}
+
+static void bfqg_stats_set_start_empty_time(struct bfq_group *bfqg)
+{
+	struct bfqg_stats *stats = &bfqg->stats;
+
+	if (blkg_rwstat_total(&stats->queued))
+		return;
+
+	/*
+	 * group is already marked empty. This can happen if bfqq got new
+	 * request in parent group and moved to this group while being added
+	 * to service tree. Just ignore the event and move on.
+	 */
+	if (bfqg_stats_empty(stats))
+		return;
+
+	stats->start_empty_time = sched_clock();
+	bfqg_stats_mark_empty(stats);
+}
+
+static void bfqg_stats_update_idle_time(struct bfq_group *bfqg)
+{
+	struct bfqg_stats *stats = &bfqg->stats;
+
+	if (bfqg_stats_idling(stats)) {
+		unsigned long long now = sched_clock();
+
+		if (time_after64(now, stats->start_idle_time))
+			blkg_stat_add(&stats->idle_time,
+				      now - stats->start_idle_time);
+		bfqg_stats_clear_idling(stats);
+	}
+}
+
+static void bfqg_stats_set_start_idle_time(struct bfq_group *bfqg)
+{
+	struct bfqg_stats *stats = &bfqg->stats;
+
+	stats->start_idle_time = sched_clock();
+	bfqg_stats_mark_idling(stats);
+}
+
+static void bfqg_stats_update_avg_queue_size(struct bfq_group *bfqg)
+{
+	struct bfqg_stats *stats = &bfqg->stats;
+
+	blkg_stat_add(&stats->avg_queue_size_sum,
+		      blkg_rwstat_total(&stats->queued));
+	blkg_stat_add(&stats->avg_queue_size_samples, 1);
+	bfqg_stats_update_group_wait_time(stats);
+}
+
+static struct blkcg_policy blkcg_policy_bfq;
+
+/*
+ * blk-cgroup policy-related handlers
+ * The following functions help in converting between blk-cgroup
+ * internal structures and BFQ-specific structures.
+ */
+
+static struct bfq_group *pd_to_bfqg(struct blkg_policy_data *pd)
+{
+	return pd ? container_of(pd, struct bfq_group, pd) : NULL;
+}
+
+static struct blkcg_gq *bfqg_to_blkg(struct bfq_group *bfqg)
+{
+	return pd_to_blkg(&bfqg->pd);
+}
+
+static struct bfq_group *blkg_to_bfqg(struct blkcg_gq *blkg)
+{
+	struct blkg_policy_data *pd = blkg_to_pd(blkg, &blkcg_policy_bfq);
+
+	return pd_to_bfqg(pd);
+}
+
+/*
+ * bfq_group handlers
+ * The following functions help in navigating the bfq_group hierarchy
+ * by allowing to find the parent of a bfq_group or the bfq_group
+ * associated to a bfq_queue.
+ */
+
+static struct bfq_group *bfqg_parent(struct bfq_group *bfqg)
+{
+	struct blkcg_gq *pblkg = bfqg_to_blkg(bfqg)->parent;
+
+	return pblkg ? blkg_to_bfqg(pblkg) : NULL;
+}
+
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq)
+{
+	struct bfq_entity *group_entity = bfqq->entity.parent;
+
+	return group_entity ? container_of(group_entity, struct bfq_group,
+					   entity) :
+			      bfqq->bfqd->root_group;
+}
+
+/*
+ * The following two functions handle get and put of a bfq_group by
+ * wrapping the related blk-cgroup hooks.
+ */
+
+static void bfqg_get(struct bfq_group *bfqg)
+{
+	return blkg_get(bfqg_to_blkg(bfqg));
+}
+
+static void bfqg_put(struct bfq_group *bfqg)
+{
+	return blkg_put(bfqg_to_blkg(bfqg));
+}
+
+static void bfqg_stats_update_io_add(struct bfq_group *bfqg,
+				     struct bfq_queue *bfqq,
+				     unsigned int op)
+{
+	blkg_rwstat_add(&bfqg->stats.queued, op, 1);
+	bfqg_stats_end_empty_time(&bfqg->stats);
+	if (!(bfqq == ((struct bfq_data *)bfqg->bfqd)->in_service_queue))
+		bfqg_stats_set_start_group_wait_time(bfqg, bfqq_group(bfqq));
+}
+
+static void bfqg_stats_update_io_remove(struct bfq_group *bfqg, unsigned int op)
+{
+	blkg_rwstat_add(&bfqg->stats.queued, op, -1);
+}
+
+static void bfqg_stats_update_io_merged(struct bfq_group *bfqg, unsigned int op)
+{
+	blkg_rwstat_add(&bfqg->stats.merged, op, 1);
+}
+
+static void bfqg_stats_update_completion(struct bfq_group *bfqg,
+			uint64_t start_time, uint64_t io_start_time,
+			unsigned int op)
+{
+	struct bfqg_stats *stats = &bfqg->stats;
+	unsigned long long now = sched_clock();
+
+	if (time_after64(now, io_start_time))
+		blkg_rwstat_add(&stats->service_time, op,
+				now - io_start_time);
+	if (time_after64(io_start_time, start_time))
+		blkg_rwstat_add(&stats->wait_time, op,
+				io_start_time - start_time);
+}
+
+/* @stats = 0 */
+static void bfqg_stats_reset(struct bfqg_stats *stats)
+{
+	/* queued stats shouldn't be cleared */
+	blkg_rwstat_reset(&stats->merged);
+	blkg_rwstat_reset(&stats->service_time);
+	blkg_rwstat_reset(&stats->wait_time);
+	blkg_stat_reset(&stats->time);
+	blkg_stat_reset(&stats->avg_queue_size_sum);
+	blkg_stat_reset(&stats->avg_queue_size_samples);
+	blkg_stat_reset(&stats->dequeue);
+	blkg_stat_reset(&stats->group_wait_time);
+	blkg_stat_reset(&stats->idle_time);
+	blkg_stat_reset(&stats->empty_time);
+}
+
+/* @to += @from */
+static void bfqg_stats_add_aux(struct bfqg_stats *to, struct bfqg_stats *from)
+{
+	if (!to || !from)
+		return;
+
+	/* queued stats shouldn't be cleared */
+	blkg_rwstat_add_aux(&to->merged, &from->merged);
+	blkg_rwstat_add_aux(&to->service_time, &from->service_time);
+	blkg_rwstat_add_aux(&to->wait_time, &from->wait_time);
+	blkg_stat_add_aux(&from->time, &from->time);
+	blkg_stat_add_aux(&to->avg_queue_size_sum, &from->avg_queue_size_sum);
+	blkg_stat_add_aux(&to->avg_queue_size_samples,
+			  &from->avg_queue_size_samples);
+	blkg_stat_add_aux(&to->dequeue, &from->dequeue);
+	blkg_stat_add_aux(&to->group_wait_time, &from->group_wait_time);
+	blkg_stat_add_aux(&to->idle_time, &from->idle_time);
+	blkg_stat_add_aux(&to->empty_time, &from->empty_time);
+}
+
+/*
+ * Transfer @bfqg's stats to its parent's dead_stats so that the ancestors'
+ * recursive stats can still account for the amount used by this bfqg after
+ * it's gone.
+ */
+static void bfqg_stats_xfer_dead(struct bfq_group *bfqg)
+{
+	struct bfq_group *parent;
+
+	if (!bfqg) /* root_group */
+		return;
+
+	parent = bfqg_parent(bfqg);
+
+	lockdep_assert_held(bfqg_to_blkg(bfqg)->q->queue_lock);
+
+	if (unlikely(!parent))
+		return;
+
+	bfqg_stats_add_aux(&parent->stats, &bfqg->stats);
+	bfqg_stats_reset(&bfqg->stats);
+}
+
+static void bfq_init_entity(struct bfq_entity *entity,
+			    struct bfq_group *bfqg)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+	entity->weight = entity->new_weight;
+	entity->orig_weight = entity->new_weight;
+	if (bfqq) {
+		bfqq->ioprio = bfqq->new_ioprio;
+		bfqq->ioprio_class = bfqq->new_ioprio_class;
+		bfqg_get(bfqg);
+	}
+	entity->parent = bfqg->my_entity; /* NULL for root group */
+	entity->sched_data = &bfqg->sched_data;
+}
+
+static void bfqg_stats_exit(struct bfqg_stats *stats)
+{
+	blkg_rwstat_exit(&stats->merged);
+	blkg_rwstat_exit(&stats->service_time);
+	blkg_rwstat_exit(&stats->wait_time);
+	blkg_rwstat_exit(&stats->queued);
+	blkg_stat_exit(&stats->time);
+	blkg_stat_exit(&stats->avg_queue_size_sum);
+	blkg_stat_exit(&stats->avg_queue_size_samples);
+	blkg_stat_exit(&stats->dequeue);
+	blkg_stat_exit(&stats->group_wait_time);
+	blkg_stat_exit(&stats->idle_time);
+	blkg_stat_exit(&stats->empty_time);
+}
+
+static int bfqg_stats_init(struct bfqg_stats *stats, gfp_t gfp)
+{
+	if (blkg_rwstat_init(&stats->merged, gfp) ||
+	    blkg_rwstat_init(&stats->service_time, gfp) ||
+	    blkg_rwstat_init(&stats->wait_time, gfp) ||
+	    blkg_rwstat_init(&stats->queued, gfp) ||
+	    blkg_stat_init(&stats->time, gfp) ||
+	    blkg_stat_init(&stats->avg_queue_size_sum, gfp) ||
+	    blkg_stat_init(&stats->avg_queue_size_samples, gfp) ||
+	    blkg_stat_init(&stats->dequeue, gfp) ||
+	    blkg_stat_init(&stats->group_wait_time, gfp) ||
+	    blkg_stat_init(&stats->idle_time, gfp) ||
+	    blkg_stat_init(&stats->empty_time, gfp)) {
+		bfqg_stats_exit(stats);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static struct bfq_group_data *cpd_to_bfqgd(struct blkcg_policy_data *cpd)
+{
+	return cpd ? container_of(cpd, struct bfq_group_data, pd) : NULL;
+}
+
+static struct bfq_group_data *blkcg_to_bfqgd(struct blkcg *blkcg)
+{
+	return cpd_to_bfqgd(blkcg_to_cpd(blkcg, &blkcg_policy_bfq));
+}
+
+static struct blkcg_policy_data *bfq_cpd_alloc(gfp_t gfp)
+{
+	struct bfq_group_data *bgd;
+
+	bgd = kzalloc(sizeof(*bgd), gfp);
+	if (!bgd)
+		return NULL;
+	return &bgd->pd;
+}
+
+static void bfq_cpd_init(struct blkcg_policy_data *cpd)
+{
+	struct bfq_group_data *d = cpd_to_bfqgd(cpd);
+
+	d->weight = cgroup_subsys_on_dfl(io_cgrp_subsys) ?
+		CGROUP_WEIGHT_DFL : BFQ_WEIGHT_LEGACY_DFL;
+}
+
+static void bfq_cpd_free(struct blkcg_policy_data *cpd)
+{
+	kfree(cpd_to_bfqgd(cpd));
+}
+
+static struct blkg_policy_data *bfq_pd_alloc(gfp_t gfp, int node)
+{
+	struct bfq_group *bfqg;
+
+	bfqg = kzalloc_node(sizeof(*bfqg), gfp, node);
+	if (!bfqg)
+		return NULL;
+
+	if (bfqg_stats_init(&bfqg->stats, gfp)) {
+		kfree(bfqg);
+		return NULL;
+	}
+
+	return &bfqg->pd;
+}
+
+static void bfq_pd_init(struct blkg_policy_data *pd)
+{
+	struct blkcg_gq *blkg;
+	struct bfq_group *bfqg;
+	struct bfq_data *bfqd;
+	struct bfq_entity *entity;
+	struct bfq_group_data *d;
+
+	blkg = pd_to_blkg(pd);
+	BUG_ON(!blkg);
+	bfqg = blkg_to_bfqg(blkg);
+	bfqd = blkg->q->elevator->elevator_data;
+	entity = &bfqg->entity;
+	d = blkcg_to_bfqgd(blkg->blkcg);
+
+	entity->orig_weight = entity->weight = entity->new_weight = d->weight;
+	entity->my_sched_data = &bfqg->sched_data;
+	bfqg->my_entity = entity; /*
+				   * the root_group's will be set to NULL
+				   * in bfq_init_queue()
+				   */
+	bfqg->bfqd = bfqd;
+	bfqg->active_entities = 0;
+	bfqg->rq_pos_tree = RB_ROOT;
+}
+
+static void bfq_pd_free(struct blkg_policy_data *pd)
+{
+	struct bfq_group *bfqg = pd_to_bfqg(pd);
+
+	bfqg_stats_exit(&bfqg->stats);
+	return kfree(bfqg);
+}
+
+static void bfq_pd_reset_stats(struct blkg_policy_data *pd)
+{
+	struct bfq_group *bfqg = pd_to_bfqg(pd);
+
+	bfqg_stats_reset(&bfqg->stats);
+}
+
+static void bfq_group_set_parent(struct bfq_group *bfqg,
+					struct bfq_group *parent)
+{
+	struct bfq_entity *entity;
+
+	BUG_ON(!parent);
+	BUG_ON(!bfqg);
+	BUG_ON(bfqg == parent);
+
+	entity = &bfqg->entity;
+	entity->parent = parent->my_entity;
+	entity->sched_data = &parent->sched_data;
+}
+
+static struct bfq_group *bfq_lookup_bfqg(struct bfq_data *bfqd,
+					 struct blkcg *blkcg)
+{
+	struct blkcg_gq *blkg;
+
+	blkg = blkg_lookup(blkcg, bfqd->queue);
+	if (likely(blkg))
+		return blkg_to_bfqg(blkg);
+	return NULL;
+}
+
+static struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd,
+					    struct blkcg *blkcg)
+{
+	struct bfq_group *bfqg, *parent;
+	struct bfq_entity *entity;
+
+	assert_spin_locked(bfqd->queue->queue_lock);
+
+	bfqg = bfq_lookup_bfqg(bfqd, blkcg);
+
+	if (unlikely(!bfqg))
+		return NULL;
+
+	/*
+	 * Update chain of bfq_groups as we might be handling a leaf group
+	 * which, along with some of its relatives, has not been hooked yet
+	 * to the private hierarchy of BFQ.
+	 */
+	entity = &bfqg->entity;
+	for_each_entity(entity) {
+		bfqg = container_of(entity, struct bfq_group, entity);
+		BUG_ON(!bfqg);
+		if (bfqg != bfqd->root_group) {
+			parent = bfqg_parent(bfqg);
+			if (!parent)
+				parent = bfqd->root_group;
+			BUG_ON(!parent);
+			bfq_group_set_parent(bfqg, parent);
+		}
+	}
+
+	return bfqg;
+}
+
+static void bfq_pos_tree_add_move(struct bfq_data *bfqd,
+				  struct bfq_queue *bfqq);
+
+static void bfq_bfqq_expire(struct bfq_data *bfqd,
+			    struct bfq_queue *bfqq,
+			    bool compensate,
+			    enum bfqq_expiration reason);
+
+/**
+ * bfq_bfqq_move - migrate @bfqq to @bfqg.
+ * @bfqd: queue descriptor.
+ * @bfqq: the queue to move.
+ * @bfqg: the group to move to.
+ *
+ * Move @bfqq to @bfqg, deactivating it from its old group and reactivating
+ * it on the new one.  Avoid putting the entity on the old group idle tree.
+ *
+ * Must be called under the queue lock; the cgroup owning @bfqg must
+ * not disappear (by now this just means that we are called under
+ * rcu_read_lock()).
+ */
+static void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+			  struct bfq_group *bfqg)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+
+	BUG_ON(!bfq_bfqq_busy(bfqq) && !RB_EMPTY_ROOT(&bfqq->sort_list));
+	BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list) && !entity->on_st);
+	BUG_ON(bfq_bfqq_busy(bfqq) && RB_EMPTY_ROOT(&bfqq->sort_list)
+	       && entity->on_st &&
+	       bfqq != bfqd->in_service_queue);
+	BUG_ON(!bfq_bfqq_busy(bfqq) && bfqq == bfqd->in_service_queue);
+
+	/* If bfqq is empty, then bfq_bfqq_expire also invokes
+	 * bfq_del_bfqq_busy, thereby removing bfqq and its entity
+	 * from data structures related to current group. Otherwise we
+	 * need to remove bfqq explicitly with bfq_deactivate_bfqq, as
+	 * we do below.
+	 */
+	if (bfqq == bfqd->in_service_queue)
+		bfq_bfqq_expire(bfqd, bfqd->in_service_queue,
+				false, BFQ_BFQQ_PREEMPTED);
+
+	BUG_ON(entity->on_st && !bfq_bfqq_busy(bfqq)
+	    && &bfq_entity_service_tree(entity)->idle !=
+	       entity->tree);
+
+	BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list) && bfq_bfqq_busy(bfqq));
+
+	if (bfq_bfqq_busy(bfqq))
+		bfq_deactivate_bfqq(bfqd, bfqq, false, false);
+	else if (entity->on_st) {
+		BUG_ON(&bfq_entity_service_tree(entity)->idle !=
+		       entity->tree);
+		bfq_put_idle_entity(bfq_entity_service_tree(entity), entity);
+	}
+	bfqg_put(bfqq_group(bfqq));
+
+	/*
+	 * Here we use a reference to bfqg.  We don't need a refcounter
+	 * as the cgroup reference will not be dropped, so that its
+	 * destroy() callback will not be invoked.
+	 */
+	entity->parent = bfqg->my_entity;
+	entity->sched_data = &bfqg->sched_data;
+	bfqg_get(bfqg);
+
+	BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list) && bfq_bfqq_busy(bfqq));
+	if (bfq_bfqq_busy(bfqq)) {
+		bfq_pos_tree_add_move(bfqd, bfqq);
+		bfq_activate_bfqq(bfqd, bfqq);
+	}
+
+	if (!bfqd->in_service_queue && !bfqd->rq_in_driver)
+		bfq_schedule_dispatch(bfqd);
+	BUG_ON(entity->on_st && !bfq_bfqq_busy(bfqq)
+	       && &bfq_entity_service_tree(entity)->idle !=
+	       entity->tree);
+}
+
+/**
+ * __bfq_bic_change_cgroup - move @bic to @cgroup.
+ * @bfqd: the queue descriptor.
+ * @bic: the bic to move.
+ * @blkcg: the blk-cgroup to move to.
+ *
+ * Move bic to blkcg, assuming that bfqd->queue is locked; the caller
+ * has to make sure that the reference to cgroup is valid across the call.
+ *
+ * NOTE: an alternative approach might have been to store the current
+ * cgroup in bfqq and getting a reference to it, reducing the lookup
+ * time here, at the price of slightly more complex code.
+ */
+static struct bfq_group *__bfq_bic_change_cgroup(struct bfq_data *bfqd,
+						struct bfq_io_cq *bic,
+						struct blkcg *blkcg)
+{
+	struct bfq_queue *async_bfqq = bic_to_bfqq(bic, 0);
+	struct bfq_queue *sync_bfqq = bic_to_bfqq(bic, 1);
+	struct bfq_group *bfqg;
+	struct bfq_entity *entity;
+
+	lockdep_assert_held(bfqd->queue->queue_lock);
+
+	bfqg = bfq_find_set_group(bfqd, blkcg);
+
+	if (unlikely(!bfqg))
+		bfqg = bfqd->root_group;
+
+	if (async_bfqq) {
+		entity = &async_bfqq->entity;
+
+		if (entity->sched_data != &bfqg->sched_data) {
+			bic_set_bfqq(bic, NULL, 0);
+			bfq_log_bfqq(bfqd, async_bfqq,
+				     "bic_change_group: %p %d",
+				     async_bfqq,
+				     async_bfqq->ref);
+			bfq_put_queue(async_bfqq);
+		}
+	}
+
+	if (sync_bfqq) {
+		entity = &sync_bfqq->entity;
+		if (entity->sched_data != &bfqg->sched_data)
+			bfq_bfqq_move(bfqd, sync_bfqq, bfqg);
+	}
+
+	return bfqg;
+}
+
+static void bfq_bic_update_cgroup(struct bfq_io_cq *bic, struct bio *bio)
+{
+	struct bfq_data *bfqd = bic_to_bfqd(bic);
+	struct bfq_group *bfqg = NULL;
+	uint64_t serial_nr;
+
+	rcu_read_lock();
+	serial_nr = bio_blkcg(bio)->css.serial_nr;
+
+	/*
+	 * Check whether blkcg has changed.  The condition may trigger
+	 * spuriously on a newly created cic but there's no harm.
+	 */
+	if (unlikely(!bfqd) || likely(bic->blkcg_serial_nr == serial_nr))
+		goto out;
+
+	bfqg = __bfq_bic_change_cgroup(bfqd, bic, bio_blkcg(bio));
+	bic->blkcg_serial_nr = serial_nr;
+out:
+	rcu_read_unlock();
+}
+
+/**
+ * bfq_flush_idle_tree - deactivate any entity on the idle tree of @st.
+ * @st: the service tree being flushed.
+ */
+static void bfq_flush_idle_tree(struct bfq_service_tree *st)
+{
+	struct bfq_entity *entity = st->first_idle;
+
+	for (; entity ; entity = st->first_idle)
+		__bfq_deactivate_entity(entity, false);
+}
+
+/**
+ * bfq_reparent_leaf_entity - move leaf entity to the root_group.
+ * @bfqd: the device data structure with the root group.
+ * @entity: the entity to move.
+ */
+static void bfq_reparent_leaf_entity(struct bfq_data *bfqd,
+				     struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+	BUG_ON(!bfqq);
+	bfq_bfqq_move(bfqd, bfqq, bfqd->root_group);
+}
+
+/**
+ * bfq_reparent_active_entities - move to the root group all active
+ *                                entities.
+ * @bfqd: the device data structure with the root group.
+ * @bfqg: the group to move from.
+ * @st: the service tree with the entities.
+ *
+ * Needs queue_lock to be taken and reference to be valid over the call.
+ */
+static void bfq_reparent_active_entities(struct bfq_data *bfqd,
+					 struct bfq_group *bfqg,
+					 struct bfq_service_tree *st)
+{
+	struct rb_root *active = &st->active;
+	struct bfq_entity *entity = NULL;
+
+	if (!RB_EMPTY_ROOT(&st->active))
+		entity = bfq_entity_of(rb_first(active));
+
+	for (; entity ; entity = bfq_entity_of(rb_first(active)))
+		bfq_reparent_leaf_entity(bfqd, entity);
+
+	if (bfqg->sched_data.in_service_entity)
+		bfq_reparent_leaf_entity(bfqd,
+			bfqg->sched_data.in_service_entity);
+}
+
+/**
+ * bfq_pd_offline - deactivate the entity associated with @pd,
+ *		    and reparent its children entities.
+ * @pd: descriptor of the policy going offline.
+ *
+ * blkio already grabs the queue_lock for us, so no need to use
+ * RCU-based magic
+ */
+static void bfq_pd_offline(struct blkg_policy_data *pd)
+{
+	struct bfq_service_tree *st;
+	struct bfq_group *bfqg;
+	struct bfq_data *bfqd;
+	struct bfq_entity *entity;
+	int i;
+
+	BUG_ON(!pd);
+	bfqg = pd_to_bfqg(pd);
+	BUG_ON(!bfqg);
+	bfqd = bfqg->bfqd;
+	BUG_ON(bfqd && !bfqd->root_group);
+
+	entity = bfqg->my_entity;
+
+	if (!entity) /* root group */
+		return;
+
+	/*
+	 * Empty all service_trees belonging to this group before
+	 * deactivating the group itself.
+	 */
+	for (i = 0; i < BFQ_IOPRIO_CLASSES; i++) {
+		BUG_ON(!bfqg->sched_data.service_tree);
+		st = bfqg->sched_data.service_tree + i;
+		/*
+		 * The idle tree may still contain bfq_queues belonging
+		 * to exited task because they never migrated to a different
+		 * cgroup from the one being destroyed now.  No one else
+		 * can access them so it's safe to act without any lock.
+		 */
+		bfq_flush_idle_tree(st);
+
+		/*
+		 * It may happen that some queues are still active
+		 * (busy) upon group destruction (if the corresponding
+		 * processes have been forced to terminate). We move
+		 * all the leaf entities corresponding to these queues
+		 * to the root_group.
+		 * Also, it may happen that the group has an entity
+		 * in service, which is disconnected from the active
+		 * tree: it must be moved, too.
+		 * There is no need to put the sync queues, as the
+		 * scheduler has taken no reference.
+		 */
+		bfq_reparent_active_entities(bfqd, bfqg, st);
+		BUG_ON(!RB_EMPTY_ROOT(&st->active));
+		BUG_ON(!RB_EMPTY_ROOT(&st->idle));
+	}
+	BUG_ON(bfqg->sched_data.next_in_service);
+	BUG_ON(bfqg->sched_data.in_service_entity);
+
+	__bfq_deactivate_entity(entity, false);
+	bfq_put_async_queues(bfqd, bfqg);
+	BUG_ON(entity->tree);
+
+	/*
+	 * @blkg is going offline and will be ignored by
+	 * blkg_[rw]stat_recursive_sum().  Transfer stats to the parent so
+	 * that they don't get lost.  If IOs complete after this point, the
+	 * stats for them will be lost.  Oh well...
+	 */
+	bfqg_stats_xfer_dead(bfqg);
+}
+
+static void bfq_end_wr_async(struct bfq_data *bfqd)
+{
+	struct blkcg_gq *blkg;
+
+	list_for_each_entry(blkg, &bfqd->queue->blkg_list, q_node) {
+		struct bfq_group *bfqg = blkg_to_bfqg(blkg);
+		BUG_ON(!bfqg);
+
+		bfq_end_wr_async_queues(bfqd, bfqg);
+	}
+	bfq_end_wr_async_queues(bfqd, bfqd->root_group);
+}
+
+static int bfq_io_show_weight(struct seq_file *sf, void *v)
+{
+	struct blkcg *blkcg = css_to_blkcg(seq_css(sf));
+	struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
+	unsigned int val = 0;
+
+	if (bfqgd)
+		val = bfqgd->weight;
+
+	seq_printf(sf, "%u\n", val);
+
+	return 0;
+}
+
+static int bfq_io_set_weight_legacy(struct cgroup_subsys_state *css,
+				    struct cftype *cftype,
+				    u64 val)
+{
+	struct blkcg *blkcg = css_to_blkcg(css);
+	struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
+	struct blkcg_gq *blkg;
+	int ret = -ERANGE;
+
+	if (val < BFQ_MIN_WEIGHT || val > BFQ_MAX_WEIGHT)
+		return ret;
+
+	ret = 0;
+	spin_lock_irq(&blkcg->lock);
+	bfqgd->weight = (unsigned short)val;
+	hlist_for_each_entry(blkg, &blkcg->blkg_list, blkcg_node) {
+		struct bfq_group *bfqg = blkg_to_bfqg(blkg);
+
+		if (!bfqg)
+			continue;
+		/*
+		 * Setting the prio_changed flag of the entity
+		 * to 1 with new_weight == weight would re-set
+		 * the value of the weight to its ioprio mapping.
+		 * Set the flag only if necessary.
+		 */
+		if ((unsigned short)val != bfqg->entity.new_weight) {
+			bfqg->entity.new_weight = (unsigned short)val;
+			/*
+			 * Make sure that the above new value has been
+			 * stored in bfqg->entity.new_weight before
+			 * setting the prio_changed flag. In fact,
+			 * this flag may be read asynchronously (in
+			 * critical sections protected by a different
+			 * lock than that held here), and finding this
+			 * flag set may cause the execution of the code
+			 * for updating parameters whose value may
+			 * depend also on bfqg->entity.new_weight (in
+			 * __bfq_entity_update_weight_prio).
+			 * This barrier makes sure that the new value
+			 * of bfqg->entity.new_weight is correctly
+			 * seen in that code.
+			 */
+			smp_wmb();
+			bfqg->entity.prio_changed = 1;
+		}
+	}
+	spin_unlock_irq(&blkcg->lock);
+
+	return ret;
+}
+
+static ssize_t bfq_io_set_weight(struct kernfs_open_file *of,
+				 char *buf, size_t nbytes,
+				 loff_t off)
+{
+	u64 weight;
+	/* First unsigned long found in the file is used */
+	int ret = kstrtoull(strim(buf), 0, &weight);
+
+	if (ret)
+		return ret;
+
+	return bfq_io_set_weight_legacy(of_css(of), NULL, weight);
+}
+
+static int bfqg_print_stat(struct seq_file *sf, void *v)
+{
+	blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)), blkg_prfill_stat,
+			  &blkcg_policy_bfq, seq_cft(sf)->private, false);
+	return 0;
+}
+
+static int bfqg_print_rwstat(struct seq_file *sf, void *v)
+{
+	blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)), blkg_prfill_rwstat,
+			  &blkcg_policy_bfq, seq_cft(sf)->private, true);
+	return 0;
+}
+
+static u64 bfqg_prfill_stat_recursive(struct seq_file *sf,
+				      struct blkg_policy_data *pd, int off)
+{
+	u64 sum = blkg_stat_recursive_sum(pd_to_blkg(pd),
+					  &blkcg_policy_bfq, off);
+	return __blkg_prfill_u64(sf, pd, sum);
+}
+
+static u64 bfqg_prfill_rwstat_recursive(struct seq_file *sf,
+					struct blkg_policy_data *pd, int off)
+{
+	struct blkg_rwstat sum = blkg_rwstat_recursive_sum(pd_to_blkg(pd),
+							   &blkcg_policy_bfq,
+							   off);
+	return __blkg_prfill_rwstat(sf, pd, &sum);
+}
+
+static int bfqg_print_stat_recursive(struct seq_file *sf, void *v)
+{
+	blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
+			  bfqg_prfill_stat_recursive, &blkcg_policy_bfq,
+			  seq_cft(sf)->private, false);
+	return 0;
+}
+
+static int bfqg_print_rwstat_recursive(struct seq_file *sf, void *v)
+{
+	blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
+			  bfqg_prfill_rwstat_recursive, &blkcg_policy_bfq,
+			  seq_cft(sf)->private, true);
+	return 0;
+}
+
+static u64 bfqg_prfill_sectors(struct seq_file *sf, struct blkg_policy_data *pd,
+			       int off)
+{
+	u64 sum = blkg_rwstat_total(&pd->blkg->stat_bytes);
+
+	return __blkg_prfill_u64(sf, pd, sum >> 9);
+}
+
+static int bfqg_print_stat_sectors(struct seq_file *sf, void *v)
+{
+	blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
+			  bfqg_prfill_sectors, &blkcg_policy_bfq, 0, false);
+	return 0;
+}
+
+static u64 bfqg_prfill_sectors_recursive(struct seq_file *sf,
+					 struct blkg_policy_data *pd, int off)
+{
+	struct blkg_rwstat tmp = blkg_rwstat_recursive_sum(pd->blkg, NULL,
+					offsetof(struct blkcg_gq, stat_bytes));
+	u64 sum = atomic64_read(&tmp.aux_cnt[BLKG_RWSTAT_READ]) +
+		atomic64_read(&tmp.aux_cnt[BLKG_RWSTAT_WRITE]);
+
+	return __blkg_prfill_u64(sf, pd, sum >> 9);
+}
+
+static int bfqg_print_stat_sectors_recursive(struct seq_file *sf, void *v)
+{
+	blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
+			  bfqg_prfill_sectors_recursive, &blkcg_policy_bfq, 0,
+			  false);
+	return 0;
+}
+
+
+static u64 bfqg_prfill_avg_queue_size(struct seq_file *sf,
+				      struct blkg_policy_data *pd, int off)
+{
+	struct bfq_group *bfqg = pd_to_bfqg(pd);
+	u64 samples = blkg_stat_read(&bfqg->stats.avg_queue_size_samples);
+	u64 v = 0;
+
+	if (samples) {
+		v = blkg_stat_read(&bfqg->stats.avg_queue_size_sum);
+		v = div64_u64(v, samples);
+	}
+	__blkg_prfill_u64(sf, pd, v);
+	return 0;
+}
+
+/* print avg_queue_size */
+static int bfqg_print_avg_queue_size(struct seq_file *sf, void *v)
+{
+	blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
+			  bfqg_prfill_avg_queue_size, &blkcg_policy_bfq,
+			  0, false);
+	return 0;
+}
+
+static struct bfq_group *
+bfq_create_group_hierarchy(struct bfq_data *bfqd, int node)
+{
+	int ret;
+
+	ret = blkcg_activate_policy(bfqd->queue, &blkcg_policy_bfq);
+	if (ret)
+		return NULL;
+
+	return blkg_to_bfqg(bfqd->queue->root_blkg);
+}
+
+static struct cftype bfq_blkcg_legacy_files[] = {
+	{
+		.name = "bfq.weight",
+		.flags = CFTYPE_NOT_ON_ROOT,
+		.seq_show = bfq_io_show_weight,
+		.write_u64 = bfq_io_set_weight_legacy,
+	},
+
+	/* statistics, covers only the tasks in the bfqg */
+	{
+		.name = "bfq.time",
+		.private = offsetof(struct bfq_group, stats.time),
+		.seq_show = bfqg_print_stat,
+	},
+	{
+		.name = "bfq.sectors",
+		.seq_show = bfqg_print_stat_sectors,
+	},
+	{
+		.name = "bfq.io_service_bytes",
+		.private = (unsigned long)&blkcg_policy_bfq,
+		.seq_show = blkg_print_stat_bytes,
+	},
+	{
+		.name = "bfq.io_serviced",
+		.private = (unsigned long)&blkcg_policy_bfq,
+		.seq_show = blkg_print_stat_ios,
+	},
+	{
+		.name = "bfq.io_service_time",
+		.private = offsetof(struct bfq_group, stats.service_time),
+		.seq_show = bfqg_print_rwstat,
+	},
+	{
+		.name = "bfq.io_wait_time",
+		.private = offsetof(struct bfq_group, stats.wait_time),
+		.seq_show = bfqg_print_rwstat,
+	},
+	{
+		.name = "bfq.io_merged",
+		.private = offsetof(struct bfq_group, stats.merged),
+		.seq_show = bfqg_print_rwstat,
+	},
+	{
+		.name = "bfq.io_queued",
+		.private = offsetof(struct bfq_group, stats.queued),
+		.seq_show = bfqg_print_rwstat,
+	},
+
+	/* the same statictics which cover the bfqg and its descendants */
+	{
+		.name = "bfq.time_recursive",
+		.private = offsetof(struct bfq_group, stats.time),
+		.seq_show = bfqg_print_stat_recursive,
+	},
+	{
+		.name = "bfq.sectors_recursive",
+		.seq_show = bfqg_print_stat_sectors_recursive,
+	},
+	{
+		.name = "bfq.io_service_bytes_recursive",
+		.private = (unsigned long)&blkcg_policy_bfq,
+		.seq_show = blkg_print_stat_bytes_recursive,
+	},
+	{
+		.name = "bfq.io_serviced_recursive",
+		.private = (unsigned long)&blkcg_policy_bfq,
+		.seq_show = blkg_print_stat_ios_recursive,
+	},
+	{
+		.name = "bfq.io_service_time_recursive",
+		.private = offsetof(struct bfq_group, stats.service_time),
+		.seq_show = bfqg_print_rwstat_recursive,
+	},
+	{
+		.name = "bfq.io_wait_time_recursive",
+		.private = offsetof(struct bfq_group, stats.wait_time),
+		.seq_show = bfqg_print_rwstat_recursive,
+	},
+	{
+		.name = "bfq.io_merged_recursive",
+		.private = offsetof(struct bfq_group, stats.merged),
+		.seq_show = bfqg_print_rwstat_recursive,
+	},
+	{
+		.name = "bfq.io_queued_recursive",
+		.private = offsetof(struct bfq_group, stats.queued),
+		.seq_show = bfqg_print_rwstat_recursive,
+	},
+	{
+		.name = "bfq.avg_queue_size",
+		.seq_show = bfqg_print_avg_queue_size,
+	},
+	{
+		.name = "bfq.group_wait_time",
+		.private = offsetof(struct bfq_group, stats.group_wait_time),
+		.seq_show = bfqg_print_stat,
+	},
+	{
+		.name = "bfq.idle_time",
+		.private = offsetof(struct bfq_group, stats.idle_time),
+		.seq_show = bfqg_print_stat,
+	},
+	{
+		.name = "bfq.empty_time",
+		.private = offsetof(struct bfq_group, stats.empty_time),
+		.seq_show = bfqg_print_stat,
+	},
+	{
+		.name = "bfq.dequeue",
+		.private = offsetof(struct bfq_group, stats.dequeue),
+		.seq_show = bfqg_print_stat,
+	},
+	{ }	/* terminate */
+};
+
+static struct cftype bfq_blkg_files[] = {
+	{
+		.name = "bfq.weight",
+		.flags = CFTYPE_NOT_ON_ROOT,
+		.seq_show = bfq_io_show_weight,
+		.write = bfq_io_set_weight,
+	},
+	{} /* terminate */
+};
+
+#else /* CONFIG_BFQ_GROUP_IOSCHED */
+
+static inline void bfqg_stats_update_io_add(struct bfq_group *bfqg,
+			struct bfq_queue *bfqq, unsigned int op) { }
+static inline void
+bfqg_stats_update_io_remove(struct bfq_group *bfqg, unsigned int op) { }
+static inline void
+bfqg_stats_update_io_merged(struct bfq_group *bfqg, unsigned int op) { }
+static inline void bfqg_stats_update_completion(struct bfq_group *bfqg,
+			uint64_t start_time, uint64_t io_start_time,
+			unsigned int op) { }
+static inline void
+bfqg_stats_set_start_group_wait_time(struct bfq_group *bfqg,
+				     struct bfq_group *curr_bfqg) { }
+static inline void bfqg_stats_end_empty_time(struct bfqg_stats *stats) { }
+static inline void bfqg_stats_update_dequeue(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_set_start_empty_time(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_update_idle_time(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_set_start_idle_time(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_update_avg_queue_size(struct bfq_group *bfqg) { }
+
+static void bfq_init_entity(struct bfq_entity *entity,
+			    struct bfq_group *bfqg)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+	entity->weight = entity->new_weight;
+	entity->orig_weight = entity->new_weight;
+	if (bfqq) {
+		bfqq->ioprio = bfqq->new_ioprio;
+		bfqq->ioprio_class = bfqq->new_ioprio_class;
+	}
+	entity->sched_data = &bfqg->sched_data;
+}
+
+static struct bfq_group *
+bfq_bic_update_cgroup(struct bfq_io_cq *bic, struct bio *bio)
+{
+	struct bfq_data *bfqd = bic_to_bfqd(bic);
+
+	return bfqd->root_group;
+}
+
+static void bfq_end_wr_async(struct bfq_data *bfqd)
+{
+	bfq_end_wr_async_queues(bfqd, bfqd->root_group);
+}
+
+static struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd,
+					    struct blkcg *blkcg)
+{
+	return bfqd->root_group;
+}
+
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq)
+{
+	return bfqq->bfqd->root_group;
+}
+
+static struct bfq_group *
+bfq_create_group_hierarchy(struct bfq_data *bfqd, int node)
+{
+	struct bfq_group *bfqg;
+	int i;
+
+	bfqg = kmalloc_node(sizeof(*bfqg), GFP_KERNEL | __GFP_ZERO, node);
+	if (!bfqg)
+		return NULL;
+
+	for (i = 0; i < BFQ_IOPRIO_CLASSES; i++)
+		bfqg->sched_data.service_tree[i] = BFQ_SERVICE_TREE_INIT;
+
+	return bfqg;
+}
+#endif
diff --git a/block/bfq-ioc.c b/block/bfq-ioc.c
new file mode 100644
index 000000000000..fb7bb8f08b75
--- /dev/null
+++ b/block/bfq-ioc.c
@@ -0,0 +1,36 @@
+/*
+ * BFQ: I/O context handling.
+ *
+ * Based on ideas and code from CFQ:
+ * Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
+ *
+ * Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
+ *		      Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2010 Paolo Valente <paolo.valente@unimore.it>
+ */
+
+/**
+ * icq_to_bic - convert iocontext queue structure to bfq_io_cq.
+ * @icq: the iocontext queue.
+ */
+static struct bfq_io_cq *icq_to_bic(struct io_cq *icq)
+{
+	/* bic->icq is the first member, %NULL will convert to %NULL */
+	return container_of(icq, struct bfq_io_cq, icq);
+}
+
+/**
+ * bfq_bic_lookup - search into @ioc a bic associated to @bfqd.
+ * @bfqd: the lookup key.
+ * @ioc: the io_context of the process doing I/O.
+ *
+ * Queue lock must be held.
+ */
+static struct bfq_io_cq *bfq_bic_lookup(struct bfq_data *bfqd,
+					struct io_context *ioc)
+{
+	if (ioc)
+		return icq_to_bic(ioc_lookup_icq(ioc, bfqd->queue));
+	return NULL;
+}
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
new file mode 100644
index 000000000000..f3c1db326a4e
--- /dev/null
+++ b/block/bfq-iosched.c
@@ -0,0 +1,5297 @@
+/*
+ * Budget Fair Queueing (BFQ) I/O scheduler.
+ *
+ * Based on ideas and code from CFQ:
+ * Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
+ *
+ * Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
+ *		      Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
+ *
+ * Licensed under the GPL-2 as detailed in the accompanying COPYING.BFQ
+ * file.
+ *
+ * BFQ is a proportional-share I/O scheduler, with some extra
+ * low-latency capabilities. BFQ also supports full hierarchical
+ * scheduling through cgroups. Next paragraphs provide an introduction
+ * on BFQ inner workings. Details on BFQ benefits and usage can be
+ * found in Documentation/block/bfq-iosched.txt.
+ *
+ * BFQ is a proportional-share storage-I/O scheduling algorithm based
+ * on the slice-by-slice service scheme of CFQ. But BFQ assigns
+ * budgets, measured in number of sectors, to processes instead of
+ * time slices. The device is not granted to the in-service process
+ * for a given time slice, but until it has exhausted its assigned
+ * budget. This change from the time to the service domain enables BFQ
+ * to distribute the device throughput among processes as desired,
+ * without any distortion due to throughput fluctuations, or to device
+ * internal queueing. BFQ uses an ad hoc internal scheduler, called
+ * B-WF2Q+, to schedule processes according to their budgets. More
+ * precisely, BFQ schedules queues associated with processes. Thanks to
+ * the accurate policy of B-WF2Q+, BFQ can afford to assign high
+ * budgets to I/O-bound processes issuing sequential requests (to
+ * boost the throughput), and yet guarantee a low latency to
+ * interactive and soft real-time applications.
+ *
+ * BFQ is described in [1], where also a reference to the initial, more
+ * theoretical paper on BFQ can be found. The interested reader can find
+ * in the latter paper full details on the main algorithm, as well as
+ * formulas of the guarantees and formal proofs of all the properties.
+ * With respect to the version of BFQ presented in these papers, this
+ * implementation adds a few more heuristics, such as the one that
+ * guarantees a low latency to soft real-time applications, and a
+ * hierarchical extension based on H-WF2Q+.
+ *
+ * B-WF2Q+ is based on WF2Q+, that is described in [2], together with
+ * H-WF2Q+, while the augmented tree used to implement B-WF2Q+ with O(log N)
+ * complexity derives from the one introduced with EEVDF in [3].
+ *
+ * [1] P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O
+ *   Scheduler", Proceedings of the First Workshop on Mobile System
+ *   Technologies (MST-2015), May 2015.
+ *   http://algogroup.unimore.it/people/paolo/disk_sched/mst-2015.pdf
+ *
+ * http://algogroup.unimo.it/people/paolo/disk_sched/bf1-v1-suite-results.pdf
+ *
+ * [2] Jon C.R. Bennett and H. Zhang, ``Hierarchical Packet Fair Queueing
+ *     Algorithms,'' IEEE/ACM Transactions on Networking, 5(5):675-689,
+ *     Oct 1997.
+ *
+ * http://www.cs.cmu.edu/~hzhang/papers/TON-97-Oct.ps.gz
+ *
+ * [3] I. Stoica and H. Abdel-Wahab, ``Earliest Eligible Virtual Deadline
+ *     First: A Flexible and Accurate Mechanism for Proportional Share
+ *     Resource Allocation,'' technical report.
+ *
+ * http://www.cs.berkeley.edu/~istoica/papers/eevdf-tr-95.pdf
+ */
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/cgroup.h>
+#include <linux/elevator.h>
+#include <linux/jiffies.h>
+#include <linux/rbtree.h>
+#include <linux/ioprio.h>
+#include "bfq.h"
+#include "blk.h"
+
+/* Expiration time of sync (0) and async (1) requests, in ns. */
+static const u64 bfq_fifo_expire[2] = { NSEC_PER_SEC / 4, NSEC_PER_SEC / 8 };
+
+/* Maximum backwards seek, in KiB. */
+static const int bfq_back_max = (16 * 1024);
+
+/* Penalty of a backwards seek, in number of sectors. */
+static const int bfq_back_penalty = 2;
+
+/* Idling period duration, in ns. */
+static u32 bfq_slice_idle = (NSEC_PER_SEC / 125);
+
+/* Minimum number of assigned budgets for which stats are safe to compute. */
+static const int bfq_stats_min_budgets = 194;
+
+/* Default maximum budget values, in sectors and number of requests. */
+static const int bfq_default_max_budget = (16 * 1024);
+
+/*
+ * Async to sync throughput distribution is controlled as follows:
+ * when an async request is served, the entity is charged the number
+ * of sectors of the request, multiplied by the factor below
+ */
+static const int bfq_async_charge_factor = 10;
+
+/* Default timeout values, in jiffies, approximating CFQ defaults. */
+static const int bfq_timeout = (HZ / 8);
+
+struct kmem_cache *bfq_pool;
+
+/* Below this threshold (in ns), we consider thinktime immediate. */
+#define BFQ_MIN_TT		(2 * NSEC_PER_MSEC)
+
+/* hw_tag detection: parallel requests threshold and min samples needed. */
+#define BFQ_HW_QUEUE_THRESHOLD	4
+#define BFQ_HW_QUEUE_SAMPLES	32
+
+#define BFQQ_SEEK_THR		(sector_t)(8 * 100)
+#define BFQQ_SECT_THR_NONROT	(sector_t)(2 * 32)
+#define BFQQ_CLOSE_THR		(sector_t)(8 * 1024)
+#define BFQQ_SEEKY(bfqq)	(hweight32(bfqq->seek_history) > 32/8)
+
+/* Min number of samples required to perform peak-rate update */
+#define BFQ_RATE_MIN_SAMPLES	32
+/* Min observation time interval required to perform a peak-rate update (ns) */
+#define BFQ_RATE_MIN_INTERVAL	(300*NSEC_PER_MSEC)
+/* Target observation time interval for a peak-rate update (ns) */
+#define BFQ_RATE_REF_INTERVAL	NSEC_PER_SEC
+
+/* Shift used for peak rate fixed precision calculations. */
+#define BFQ_RATE_SHIFT		16
+
+/*
+ * By default, BFQ computes the duration of the weight raising for
+ * interactive applications automatically, using the following formula:
+ * duration = (R / r) * T, where r is the peak rate of the device, and
+ * R and T are two reference parameters.
+ * In particular, R is the peak rate of the reference device (see below),
+ * and T is a reference time: given the systems that are likely to be
+ * installed on the reference device according to its speed class, T is
+ * about the maximum time needed, under BFQ and while reading two files in
+ * parallel, to load typical large applications on these systems.
+ * In practice, the slower/faster the device at hand is, the more/less it
+ * takes to load applications with respect to the reference device.
+ * Accordingly, the longer/shorter BFQ grants weight raising to interactive
+ * applications.
+ *
+ * BFQ uses four different reference pairs (R, T), depending on:
+ * . whether the device is rotational or non-rotational;
+ * . whether the device is slow, such as old or portable HDDs, as well as
+ *   SD cards, or fast, such as newer HDDs and SSDs.
+ *
+ * The device's speed class is dynamically (re)detected in
+ * bfq_update_peak_rate() every time the estimated peak rate is updated.
+ *
+ * In the following definitions, R_slow[0]/R_fast[0] and
+ * T_slow[0]/T_fast[0] are the reference values for a slow/fast
+ * rotational device, whereas R_slow[1]/R_fast[1] and
+ * T_slow[1]/T_fast[1] are the reference values for a slow/fast
+ * non-rotational device. Finally, device_speed_thresh are the
+ * thresholds used to switch between speed classes. The reference
+ * rates are not the actual peak rates of the devices used as a
+ * reference, but slightly lower values. The reason for using these
+ * slightly lower values is that the peak-rate estimator tends to
+ * yield slightly lower values than the actual peak rate (it can yield
+ * the actual peak rate only if there is only one process doing I/O,
+ * and the process does sequential I/O).
+ *
+ * Both the reference peak rates and the thresholds are measured in
+ * sectors/usec, left-shifted by BFQ_RATE_SHIFT.
+ */
+static int R_slow[2] = {1000, 10700};
+static int R_fast[2] = {14000, 33000};
+/*
+ * To improve readability, a conversion function is used to initialize the
+ * following arrays, which entails that they can be initialized only in a
+ * function.
+ */
+static int T_slow[2];
+static int T_fast[2];
+static int device_speed_thresh[2];
+
+#define BFQ_SERVICE_TREE_INIT	((struct bfq_service_tree)		\
+				{ RB_ROOT, RB_ROOT, NULL, NULL, 0, 0 })
+
+#define RQ_BIC(rq)		((struct bfq_io_cq *) (rq)->elv.priv[0])
+#define RQ_BFQQ(rq)		((rq)->elv.priv[1])
+
+static void bfq_schedule_dispatch(struct bfq_data *bfqd);
+
+#include "bfq-ioc.c"
+#include "bfq-sched.c"
+#include "bfq-cgroup.c"
+
+#define bfq_class_idle(bfqq)	((bfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
+#define bfq_class_rt(bfqq)	((bfqq)->ioprio_class == IOPRIO_CLASS_RT)
+
+#define bfq_sample_valid(samples)	((samples) > 80)
+
+/*
+ * Scheduler run of queue, if there are requests pending and no one in the
+ * driver that will restart queueing.
+ */
+static void bfq_schedule_dispatch(struct bfq_data *bfqd)
+{
+	if (bfqd->queued != 0) {
+		bfq_log(bfqd, "schedule dispatch");
+		kblockd_schedule_work(&bfqd->unplug_work);
+	}
+}
+
+/*
+ * Lifted from AS - choose which of rq1 and rq2 that is best served now.
+ * We choose the request that is closesr to the head right now.  Distance
+ * behind the head is penalized and only allowed to a certain extent.
+ */
+static struct request *bfq_choose_req(struct bfq_data *bfqd,
+				      struct request *rq1,
+				      struct request *rq2,
+				      sector_t last)
+{
+	sector_t s1, s2, d1 = 0, d2 = 0;
+	unsigned long back_max;
+#define BFQ_RQ1_WRAP	0x01 /* request 1 wraps */
+#define BFQ_RQ2_WRAP	0x02 /* request 2 wraps */
+	unsigned int wrap = 0; /* bit mask: requests behind the disk head? */
+
+	if (!rq1 || rq1 == rq2)
+		return rq2;
+	if (!rq2)
+		return rq1;
+
+	if (rq_is_sync(rq1) && !rq_is_sync(rq2))
+		return rq1;
+	else if (rq_is_sync(rq2) && !rq_is_sync(rq1))
+		return rq2;
+	if ((rq1->cmd_flags & REQ_META) && !(rq2->cmd_flags & REQ_META))
+		return rq1;
+	else if ((rq2->cmd_flags & REQ_META) && !(rq1->cmd_flags & REQ_META))
+		return rq2;
+
+	s1 = blk_rq_pos(rq1);
+	s2 = blk_rq_pos(rq2);
+
+	/*
+	 * By definition, 1KiB is 2 sectors.
+	 */
+	back_max = bfqd->bfq_back_max * 2;
+
+	/*
+	 * Strict one way elevator _except_ in the case where we allow
+	 * short backward seeks which are biased as twice the cost of a
+	 * similar forward seek.
+	 */
+	if (s1 >= last)
+		d1 = s1 - last;
+	else if (s1 + back_max >= last)
+		d1 = (last - s1) * bfqd->bfq_back_penalty;
+	else
+		wrap |= BFQ_RQ1_WRAP;
+
+	if (s2 >= last)
+		d2 = s2 - last;
+	else if (s2 + back_max >= last)
+		d2 = (last - s2) * bfqd->bfq_back_penalty;
+	else
+		wrap |= BFQ_RQ2_WRAP;
+
+	/* Found required data */
+
+	/*
+	 * By doing switch() on the bit mask "wrap" we avoid having to
+	 * check two variables for all permutations: --> faster!
+	 */
+	switch (wrap) {
+	case 0: /* common case for CFQ: rq1 and rq2 not wrapped */
+		if (d1 < d2)
+			return rq1;
+		else if (d2 < d1)
+			return rq2;
+
+		if (s1 >= s2)
+			return rq1;
+		else
+			return rq2;
+
+	case BFQ_RQ2_WRAP:
+		return rq1;
+	case BFQ_RQ1_WRAP:
+		return rq2;
+	case (BFQ_RQ1_WRAP|BFQ_RQ2_WRAP): /* both rqs wrapped */
+	default:
+		/*
+		 * Since both rqs are wrapped,
+		 * start with the one that's further behind head
+		 * (--> only *one* back seek required),
+		 * since back seek takes more time than forward.
+		 */
+		if (s1 <= s2)
+			return rq1;
+		else
+			return rq2;
+	}
+}
+
+static struct bfq_queue *
+bfq_rq_pos_tree_lookup(struct bfq_data *bfqd, struct rb_root *root,
+		     sector_t sector, struct rb_node **ret_parent,
+		     struct rb_node ***rb_link)
+{
+	struct rb_node **p, *parent;
+	struct bfq_queue *bfqq = NULL;
+
+	parent = NULL;
+	p = &root->rb_node;
+	while (*p) {
+		struct rb_node **n;
+
+		parent = *p;
+		bfqq = rb_entry(parent, struct bfq_queue, pos_node);
+
+		/*
+		 * Sort strictly based on sector. Smallest to the left,
+		 * largest to the right.
+		 */
+		if (sector > blk_rq_pos(bfqq->next_rq))
+			n = &(*p)->rb_right;
+		else if (sector < blk_rq_pos(bfqq->next_rq))
+			n = &(*p)->rb_left;
+		else
+			break;
+		p = n;
+		bfqq = NULL;
+	}
+
+	*ret_parent = parent;
+	if (rb_link)
+		*rb_link = p;
+
+	bfq_log(bfqd, "rq_pos_tree_lookup %llu: returning %d",
+		(unsigned long long) sector,
+		bfqq ? bfqq->pid : 0);
+
+	return bfqq;
+}
+
+static void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	struct rb_node **p, *parent;
+	struct bfq_queue *__bfqq;
+
+	if (bfqq->pos_root) {
+		rb_erase(&bfqq->pos_node, bfqq->pos_root);
+		bfqq->pos_root = NULL;
+	}
+
+	if (bfq_class_idle(bfqq))
+		return;
+	if (!bfqq->next_rq)
+		return;
+
+	bfqq->pos_root = &bfq_bfqq_to_bfqg(bfqq)->rq_pos_tree;
+	__bfqq = bfq_rq_pos_tree_lookup(bfqd, bfqq->pos_root,
+			blk_rq_pos(bfqq->next_rq), &parent, &p);
+	if (!__bfqq) {
+		rb_link_node(&bfqq->pos_node, parent, p);
+		rb_insert_color(&bfqq->pos_node, bfqq->pos_root);
+	} else
+		bfqq->pos_root = NULL;
+}
+
+/*
+ * Tell whether there are active queues or groups with differentiated weights.
+ */
+static bool bfq_differentiated_weights(struct bfq_data *bfqd)
+{
+	/*
+	 * For weights to differ, at least one of the trees must contain
+	 * at least two nodes.
+	 */
+	return (!RB_EMPTY_ROOT(&bfqd->queue_weights_tree) &&
+		(bfqd->queue_weights_tree.rb_node->rb_left ||
+		 bfqd->queue_weights_tree.rb_node->rb_right)
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	       ) ||
+	       (!RB_EMPTY_ROOT(&bfqd->group_weights_tree) &&
+		(bfqd->group_weights_tree.rb_node->rb_left ||
+		 bfqd->group_weights_tree.rb_node->rb_right)
+#endif
+	       );
+}
+
+/*
+ * The following function returns true if every queue must receive the
+ * same share of the throughput (this condition is used when deciding
+ * whether idling may be disabled, see the comments in the function
+ * bfq_bfqq_may_idle()).
+ *
+ * Such a scenario occurs when:
+ * 1) all active queues have the same weight,
+ * 2) all active groups at the same level in the groups tree have the same
+ *    weight,
+ * 3) all active groups at the same level in the groups tree have the same
+ *    number of children.
+ *
+ * Unfortunately, keeping the necessary state for evaluating exactly the
+ * above symmetry conditions would be quite complex and time-consuming.
+ * Therefore this function evaluates, instead, the following stronger
+ * sub-conditions, for which it is much easier to maintain the needed
+ * state:
+ * 1) all active queues have the same weight,
+ * 2) all active groups have the same weight,
+ * 3) all active groups have at most one active child each.
+ * In particular, the last two conditions are always true if hierarchical
+ * support and the cgroups interface are not enabled, thus no state needs
+ * to be maintained in this case.
+ */
+static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
+{
+	return !bfq_differentiated_weights(bfqd);
+}
+
+/*
+ * If the weight-counter tree passed as input contains no counter for
+ * the weight of the input entity, then add that counter; otherwise just
+ * increment the existing counter.
+ *
+ * Note that weight-counter trees contain few nodes in mostly symmetric
+ * scenarios. For example, if all queues have the same weight, then the
+ * weight-counter tree for the queues may contain at most one node.
+ * This holds even if low_latency is on, because weight-raised queues
+ * are not inserted in the tree.
+ * In most scenarios, the rate at which nodes are created/destroyed
+ * should be low too.
+ */
+static void bfq_weights_tree_add(struct bfq_data *bfqd,
+				 struct bfq_entity *entity,
+				 struct rb_root *root)
+{
+	struct rb_node **new = &(root->rb_node), *parent = NULL;
+
+	/*
+	 * Do not insert if the entity is already associated with a
+	 * counter, which happens if:
+	 *   1) the entity is associated with a queue,
+	 *   2) a request arrival has caused the queue to become both
+	 *      non-weight-raised, and hence change its weight, and
+	 *      backlogged; in this respect, each of the two events
+	 *      causes an invocation of this function,
+	 *   3) this is the invocation of this function caused by the
+	 *      second event. This second invocation is actually useless,
+	 *      and we handle this fact by exiting immediately. More
+	 *      efficient or clearer solutions might possibly be adopted.
+	 */
+	if (entity->weight_counter)
+		return;
+
+	while (*new) {
+		struct bfq_weight_counter *__counter = container_of(*new,
+						struct bfq_weight_counter,
+						weights_node);
+		parent = *new;
+
+		if (entity->weight == __counter->weight) {
+			entity->weight_counter = __counter;
+			goto inc_counter;
+		}
+		if (entity->weight < __counter->weight)
+			new = &((*new)->rb_left);
+		else
+			new = &((*new)->rb_right);
+	}
+
+	entity->weight_counter = kzalloc(sizeof(struct bfq_weight_counter),
+					 GFP_ATOMIC);
+	entity->weight_counter->weight = entity->weight;
+	rb_link_node(&entity->weight_counter->weights_node, parent, new);
+	rb_insert_color(&entity->weight_counter->weights_node, root);
+
+inc_counter:
+	entity->weight_counter->num_active++;
+}
+
+/*
+ * Decrement the weight counter associated with the entity, and, if the
+ * counter reaches 0, remove the counter from the tree.
+ * See the comments to the function bfq_weights_tree_add() for considerations
+ * about overhead.
+ */
+static void bfq_weights_tree_remove(struct bfq_data *bfqd,
+				    struct bfq_entity *entity,
+				    struct rb_root *root)
+{
+	if (!entity->weight_counter)
+		return;
+
+	BUG_ON(RB_EMPTY_ROOT(root));
+	BUG_ON(entity->weight_counter->weight != entity->weight);
+
+	BUG_ON(!entity->weight_counter->num_active);
+	entity->weight_counter->num_active--;
+	if (entity->weight_counter->num_active > 0)
+		goto reset_entity_pointer;
+
+	rb_erase(&entity->weight_counter->weights_node, root);
+	kfree(entity->weight_counter);
+
+reset_entity_pointer:
+	entity->weight_counter = NULL;
+}
+
+static struct request *bfq_find_next_rq(struct bfq_data *bfqd,
+					struct bfq_queue *bfqq,
+					struct request *last)
+{
+	struct rb_node *rbnext = rb_next(&last->rb_node);
+	struct rb_node *rbprev = rb_prev(&last->rb_node);
+	struct request *next = NULL, *prev = NULL;
+
+	BUG_ON(RB_EMPTY_NODE(&last->rb_node));
+
+	if (rbprev)
+		prev = rb_entry_rq(rbprev);
+
+	if (rbnext)
+		next = rb_entry_rq(rbnext);
+	else {
+		rbnext = rb_first(&bfqq->sort_list);
+		if (rbnext && rbnext != &last->rb_node)
+			next = rb_entry_rq(rbnext);
+	}
+
+	return bfq_choose_req(bfqd, next, prev, blk_rq_pos(last));
+}
+
+/* see the definition of bfq_async_charge_factor for details */
+static unsigned long bfq_serv_to_charge(struct request *rq,
+					struct bfq_queue *bfqq)
+{
+	if (bfq_bfqq_sync(bfqq) || bfqq->wr_coeff > 1)
+		return blk_rq_sectors(rq);
+
+	/*
+	 * If there are no weight-raised queues, then amplify service
+	 * by just the async charge factor; otherwise amplify service
+	 * by twice the async charge factor, to further reduce latency
+	 * for weight-raised queues.
+	 */
+	if (bfqq->bfqd->wr_busy_queues == 0)
+		return blk_rq_sectors(rq) * bfq_async_charge_factor;
+
+	return blk_rq_sectors(rq) * 2 * bfq_async_charge_factor;
+}
+
+/**
+ * bfq_updated_next_req - update the queue after a new next_rq selection.
+ * @bfqd: the device data the queue belongs to.
+ * @bfqq: the queue to update.
+ *
+ * If the first request of a queue changes we make sure that the queue
+ * has enough budget to serve at least its first request (if the
+ * request has grown).  We do this because if the queue has not enough
+ * budget for its first request, it has to go through two dispatch
+ * rounds to actually get it dispatched.
+ */
+static void bfq_updated_next_req(struct bfq_data *bfqd,
+				 struct bfq_queue *bfqq)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+	struct bfq_service_tree *st = bfq_entity_service_tree(entity);
+	struct request *next_rq = bfqq->next_rq;
+	unsigned long new_budget;
+
+	if (!next_rq)
+		return;
+
+	if (bfqq == bfqd->in_service_queue)
+		/*
+		 * In order not to break guarantees, budgets cannot be
+		 * changed after an entity has been selected.
+		 */
+		return;
+
+	BUG_ON(entity->tree != &st->active);
+	BUG_ON(entity == entity->sched_data->in_service_entity);
+
+	new_budget = max_t(unsigned long, bfqq->max_budget,
+			   bfq_serv_to_charge(next_rq, bfqq));
+	if (entity->budget != new_budget) {
+		entity->budget = new_budget;
+		bfq_log_bfqq(bfqd, bfqq, "updated next rq: new budget %lu",
+					 new_budget);
+		bfq_requeue_bfqq(bfqd, bfqq);
+	}
+}
+
+static unsigned int bfq_wr_duration(struct bfq_data *bfqd)
+{
+	u64 dur;
+
+	if (bfqd->bfq_wr_max_time > 0)
+		return bfqd->bfq_wr_max_time;
+
+	dur = bfqd->RT_prod;
+	do_div(dur, bfqd->peak_rate);
+
+	/*
+	 * Limit duration between 3 and 13 seconds. Tests show that
+	 * higher values than 13 seconds often yield the opposite of
+	 * the desired result, i.e., worsen responsiveness by letting
+	 * non-interactive and non-soft-real-time applications
+	 * preserve weight raising for a too long time interval.
+	 *
+	 * On the other end, lower values than 3 seconds make it
+	 * difficult for most interactive tasks to complete their jobs
+	 * before weight-raising finishes.
+	 */
+	if (dur > msecs_to_jiffies(13000))
+		dur = msecs_to_jiffies(13000);
+	else if (dur < msecs_to_jiffies(3000))
+		dur = msecs_to_jiffies(3000);
+
+	return dur;
+}
+
+static void
+bfq_bfqq_resume_state(struct bfq_queue *bfqq, struct bfq_io_cq *bic)
+{
+	if (bic->saved_idle_window)
+		bfq_mark_bfqq_idle_window(bfqq);
+	else
+		bfq_clear_bfqq_idle_window(bfqq);
+
+	if (bic->saved_IO_bound)
+		bfq_mark_bfqq_IO_bound(bfqq);
+	else
+		bfq_clear_bfqq_IO_bound(bfqq);
+
+	bfqq->wr_coeff = bic->saved_wr_coeff;
+	bfqq->wr_start_at_switch_to_srt = bic->saved_wr_start_at_switch_to_srt;
+	BUG_ON(time_is_after_jiffies(bfqq->wr_start_at_switch_to_srt));
+	bfqq->last_wr_start_finish = bic->saved_last_wr_start_finish;
+	bfqq->wr_cur_max_time = bic->saved_wr_cur_max_time;
+	BUG_ON(time_is_after_jiffies(bfqq->last_wr_start_finish));
+
+	if (bfqq->wr_coeff > 1 && (bfq_bfqq_in_large_burst(bfqq) ||
+	    time_is_before_jiffies(bfqq->last_wr_start_finish +
+				   bfqq->wr_cur_max_time))) {
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			     "resume state: switching off wr (%lu + %lu < %lu)",
+			     bfqq->last_wr_start_finish, bfqq->wr_cur_max_time,
+			     jiffies);
+
+		bfqq->wr_coeff = 1;
+	}
+	/* make sure weight will be updated, however we got here */
+	bfqq->entity.prio_changed = 1;
+}
+
+static int bfqq_process_refs(struct bfq_queue *bfqq)
+{
+	int process_refs, io_refs;
+
+	lockdep_assert_held(bfqq->bfqd->queue->queue_lock);
+
+	io_refs = bfqq->allocated[READ] + bfqq->allocated[WRITE];
+	process_refs = bfqq->ref - io_refs - bfqq->entity.on_st;
+	BUG_ON(process_refs < 0);
+	return process_refs;
+}
+
+/* Empty burst list and add just bfqq (see comments to bfq_handle_burst) */
+static void bfq_reset_burst_list(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	struct bfq_queue *item;
+	struct hlist_node *n;
+
+	hlist_for_each_entry_safe(item, n, &bfqd->burst_list, burst_list_node)
+		hlist_del_init(&item->burst_list_node);
+	hlist_add_head(&bfqq->burst_list_node, &bfqd->burst_list);
+	bfqd->burst_size = 1;
+	bfqd->burst_parent_entity = bfqq->entity.parent;
+}
+
+/* Add bfqq to the list of queues in current burst (see bfq_handle_burst) */
+static void bfq_add_to_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	/* Increment burst size to take into account also bfqq */
+	bfqd->burst_size++;
+
+	bfq_log_bfqq(bfqd, bfqq, "add_to_burst %d", bfqd->burst_size);
+
+	BUG_ON(bfqd->burst_size > bfqd->bfq_large_burst_thresh);
+
+	if (bfqd->burst_size == bfqd->bfq_large_burst_thresh) {
+		struct bfq_queue *pos, *bfqq_item;
+		struct hlist_node *n;
+
+		/*
+		 * Enough queues have been activated shortly after each
+		 * other to consider this burst as large.
+		 */
+		bfqd->large_burst = true;
+		bfq_log_bfqq(bfqd, bfqq, "add_to_burst: large burst started");
+
+		/*
+		 * We can now mark all queues in the burst list as
+		 * belonging to a large burst.
+		 */
+		hlist_for_each_entry(bfqq_item, &bfqd->burst_list,
+				     burst_list_node) {
+			bfq_mark_bfqq_in_large_burst(bfqq_item);
+			bfq_log_bfqq(bfqd, bfqq_item, "marked in large burst");
+		}
+		bfq_mark_bfqq_in_large_burst(bfqq);
+		bfq_log_bfqq(bfqd, bfqq, "marked in large burst");
+
+		/*
+		 * From now on, and until the current burst finishes, any
+		 * new queue being activated shortly after the last queue
+		 * was inserted in the burst can be immediately marked as
+		 * belonging to a large burst. So the burst list is not
+		 * needed any more. Remove it.
+		 */
+		hlist_for_each_entry_safe(pos, n, &bfqd->burst_list,
+					  burst_list_node)
+			hlist_del_init(&pos->burst_list_node);
+	} else /*
+		* Burst not yet large: add bfqq to the burst list. Do
+		* not increment the ref counter for bfqq, because bfqq
+		* is removed from the burst list before freeing bfqq
+		* in put_queue.
+		*/
+		hlist_add_head(&bfqq->burst_list_node, &bfqd->burst_list);
+}
+
+/*
+ * If many queues belonging to the same group happen to be created
+ * shortly after each other, then the processes associated with these
+ * queues have typically a common goal. In particular, bursts of queue
+ * creations are usually caused by services or applications that spawn
+ * many parallel threads/processes. Examples are systemd during boot,
+ * or git grep. To help these processes get their job done as soon as
+ * possible, it is usually better to not grant either weight-raising
+ * or device idling to their queues.
+ *
+ * In this comment we describe, firstly, the reasons why this fact
+ * holds, and, secondly, the next function, which implements the main
+ * steps needed to properly mark these queues so that they can then be
+ * treated in a different way.
+ *
+ * The above services or applications benefit mostly from a high
+ * throughput: the quicker the requests of the activated queues are
+ * cumulatively served, the sooner the target job of these queues gets
+ * completed. As a consequence, weight-raising any of these queues,
+ * which also implies idling the device for it, is almost always
+ * counterproductive. In most cases it just lowers throughput.
+ *
+ * On the other hand, a burst of queue creations may be caused also by
+ * the start of an application that does not consist of a lot of
+ * parallel I/O-bound threads. In fact, with a complex application,
+ * several short processes may need to be executed to start-up the
+ * application. In this respect, to start an application as quickly as
+ * possible, the best thing to do is in any case to privilege the I/O
+ * related to the application with respect to all other
+ * I/O. Therefore, the best strategy to start as quickly as possible
+ * an application that causes a burst of queue creations is to
+ * weight-raise all the queues created during the burst. This is the
+ * exact opposite of the best strategy for the other type of bursts.
+ *
+ * In the end, to take the best action for each of the two cases, the
+ * two types of bursts need to be distinguished. Fortunately, this
+ * seems relatively easy, by looking at the sizes of the bursts. In
+ * particular, we found a threshold such that only bursts with a
+ * larger size than that threshold are apparently caused by
+ * services or commands such as systemd or git grep. For brevity,
+ * hereafter we call just 'large' these bursts. BFQ *does not*
+ * weight-raise queues whose creation occurs in a large burst. In
+ * addition, for each of these queues BFQ performs or does not perform
+ * idling depending on which choice boosts the throughput more. The
+ * exact choice depends on the device and request pattern at
+ * hand.
+ *
+ * Unfortunately, false positives may occur while an interactive task
+ * is starting (e.g., an application is being started). The
+ * consequence is that the queues associated with the task do not
+ * enjoy weight raising as expected. Fortunately these false positives
+ * are very rare. They typically occur if some service happens to
+ * start doing I/O exactly when the interactive task starts.
+ *
+ * Turning back to the next function, it implements all the steps
+ * needed to detect the occurrence of a large burst and to properly
+ * mark all the queues belonging to it (so that they can then be
+ * treated in a different way). This goal is achieved by maintaining a
+ * "burst list" that holds, temporarily, the queues that belong to the
+ * burst in progress. The list is then used to mark these queues as
+ * belonging to a large burst if the burst does become large. The main
+ * steps are the following.
+ *
+ * . when the very first queue is created, the queue is inserted into the
+ *   list (as it could be the first queue in a possible burst)
+ *
+ * . if the current burst has not yet become large, and a queue Q that does
+ *   not yet belong to the burst is activated shortly after the last time
+ *   at which a new queue entered the burst list, then the function appends
+ *   Q to the burst list
+ *
+ * . if, as a consequence of the previous step, the burst size reaches
+ *   the large-burst threshold, then
+ *
+ *     . all the queues in the burst list are marked as belonging to a
+ *       large burst
+ *
+ *     . the burst list is deleted; in fact, the burst list already served
+ *       its purpose (keeping temporarily track of the queues in a burst,
+ *       so as to be able to mark them as belonging to a large burst in the
+ *       previous sub-step), and now is not needed any more
+ *
+ *     . the device enters a large-burst mode
+ *
+ * . if a queue Q that does not belong to the burst is created while
+ *   the device is in large-burst mode and shortly after the last time
+ *   at which a queue either entered the burst list or was marked as
+ *   belonging to the current large burst, then Q is immediately marked
+ *   as belonging to a large burst.
+ *
+ * . if a queue Q that does not belong to the burst is created a while
+ *   later, i.e., not shortly after, than the last time at which a queue
+ *   either entered the burst list or was marked as belonging to the
+ *   current large burst, then the current burst is deemed as finished and:
+ *
+ *        . the large-burst mode is reset if set
+ *
+ *        . the burst list is emptied
+ *
+ *        . Q is inserted in the burst list, as Q may be the first queue
+ *          in a possible new burst (then the burst list contains just Q
+ *          after this step).
+ */
+static void bfq_handle_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	/*
+	 * If bfqq is already in the burst list or is part of a large
+	 * burst, or finally has just been split, then there is
+	 * nothing else to do.
+	 */
+	if (!hlist_unhashed(&bfqq->burst_list_node) ||
+	    bfq_bfqq_in_large_burst(bfqq) ||
+	    time_is_after_eq_jiffies(bfqq->split_time +
+				     msecs_to_jiffies(10)))
+		return;
+
+	/*
+	 * If bfqq's creation happens late enough, or bfqq belongs to
+	 * a different group than the burst group, then the current
+	 * burst is finished, and related data structures must be
+	 * reset.
+	 *
+	 * In this respect, consider the special case where bfqq is
+	 * the very first queue created after BFQ is selected for this
+	 * device. In this case, last_ins_in_burst and
+	 * burst_parent_entity are not yet significant when we get
+	 * here. But it is easy to verify that, whether or not the
+	 * following condition is true, bfqq will end up being
+	 * inserted into the burst list. In particular the list will
+	 * happen to contain only bfqq. And this is exactly what has
+	 * to happen, as bfqq may be the first queue of the first
+	 * burst.
+	 */
+	if (time_is_before_jiffies(bfqd->last_ins_in_burst +
+	    bfqd->bfq_burst_interval) ||
+	    bfqq->entity.parent != bfqd->burst_parent_entity) {
+		bfqd->large_burst = false;
+		bfq_reset_burst_list(bfqd, bfqq);
+		bfq_log_bfqq(bfqd, bfqq,
+			"handle_burst: late activation or different group");
+		goto end;
+	}
+
+	/*
+	 * If we get here, then bfqq is being activated shortly after the
+	 * last queue. So, if the current burst is also large, we can mark
+	 * bfqq as belonging to this large burst immediately.
+	 */
+	if (bfqd->large_burst) {
+		bfq_log_bfqq(bfqd, bfqq, "handle_burst: marked in burst");
+		bfq_mark_bfqq_in_large_burst(bfqq);
+		goto end;
+	}
+
+	/*
+	 * If we get here, then a large-burst state has not yet been
+	 * reached, but bfqq is being activated shortly after the last
+	 * queue. Then we add bfqq to the burst.
+	 */
+	bfq_add_to_burst(bfqd, bfqq);
+end:
+	/*
+	 * At this point, bfqq either has been added to the current
+	 * burst or has caused the current burst to terminate and a
+	 * possible new burst to start. In particular, in the second
+	 * case, bfqq has become the first queue in the possible new
+	 * burst.  In both cases last_ins_in_burst needs to be moved
+	 * forward.
+	 */
+	bfqd->last_ins_in_burst = jiffies;
+
+}
+
+static int bfq_bfqq_budget_left(struct bfq_queue *bfqq)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+
+	return entity->budget - entity->service;
+}
+
+/*
+ * If enough samples have been computed, return the current max budget
+ * stored in bfqd, which is dynamically updated according to the
+ * estimated disk peak rate; otherwise return the default max budget
+ */
+static int bfq_max_budget(struct bfq_data *bfqd)
+{
+	if (bfqd->budgets_assigned < bfq_stats_min_budgets)
+		return bfq_default_max_budget;
+	else
+		return bfqd->bfq_max_budget;
+}
+
+/*
+ * Return min budget, which is a fraction of the current or default
+ * max budget (trying with 1/32)
+ */
+static int bfq_min_budget(struct bfq_data *bfqd)
+{
+	if (bfqd->budgets_assigned < bfq_stats_min_budgets)
+		return bfq_default_max_budget / 32;
+	else
+		return bfqd->bfq_max_budget / 32;
+}
+
+static void bfq_bfqq_expire(struct bfq_data *bfqd,
+			    struct bfq_queue *bfqq,
+			    bool compensate,
+			    enum bfqq_expiration reason);
+
+/*
+ * The next function, invoked after the input queue bfqq switches from
+ * idle to busy, updates the budget of bfqq. The function also tells
+ * whether the in-service queue should be expired, by returning
+ * true. The purpose of expiring the in-service queue is to give bfqq
+ * the chance to possibly preempt the in-service queue, and the reason
+ * for preempting the in-service queue is to achieve one of the two
+ * goals below.
+ *
+ * 1. Guarantee to bfqq its reserved bandwidth even if bfqq has
+ * expired because it has remained idle. In particular, bfqq may have
+ * expired for one of the following two reasons:
+ *
+ * - BFQ_BFQQ_NO_MORE_REQUEST bfqq did not enjoy any device idling and
+ *   did not make it to issue a new request before its last request
+ *   was served;
+ *
+ * - BFQ_BFQQ_TOO_IDLE bfqq did enjoy device idling, but did not issue
+ *   a new request before the expiration of the idling-time.
+ *
+ * Even if bfqq has expired for one of the above reasons, the process
+ * associated with the queue may be however issuing requests greedily,
+ * and thus be sensitive to the bandwidth it receives (bfqq may have
+ * remained idle for other reasons: CPU high load, bfqq not enjoying
+ * idling, I/O throttling somewhere in the path from the process to
+ * the I/O scheduler, ...). But if, after every expiration for one of
+ * the above two reasons, bfqq has to wait for the service of at least
+ * one full budget of another queue before being served again, then
+ * bfqq is likely to get a much lower bandwidth or resource time than
+ * its reserved ones. To address this issue, two countermeasures need
+ * to be taken.
+ *
+ * First, the budget and the timestamps of bfqq need to be updated in
+ * a special way on bfqq reactivation: they need to be updated as if
+ * bfqq did not remain idle and did not expire. In fact, if they are
+ * computed as if bfqq expired and remained idle until reactivation,
+ * then the process associated with bfqq is treated as if, instead of
+ * being greedy, it stopped issuing requests when bfqq remained idle,
+ * and restarts issuing requests only on this reactivation. In other
+ * words, the scheduler does not help the process recover the "service
+ * hole" between bfqq expiration and reactivation. As a consequence,
+ * the process receives a lower bandwidth than its reserved one. In
+ * contrast, to recover this hole, the budget must be updated as if
+ * bfqq was not expired at all before this reactivation, i.e., it must
+ * be set to the value of the remaining budget when bfqq was
+ * expired. Along the same line, timestamps need to be assigned the
+ * value they had the last time bfqq was selected for service, i.e.,
+ * before last expiration. Thus timestamps need to be back-shifted
+ * with respect to their normal computation (see [1] for more details
+ * on this tricky aspect).
+ *
+ * Secondly, to allow the process to recover the hole, the in-service
+ * queue must be expired too, to give bfqq the chance to preempt it
+ * immediately. In fact, if bfqq has to wait for a full budget of the
+ * in-service queue to be completed, then it may become impossible to
+ * let the process recover the hole, even if the back-shifted
+ * timestamps of bfqq are lower than those of the in-service queue. If
+ * this happens for most or all of the holes, then the process may not
+ * receive its reserved bandwidth. In this respect, it is worth noting
+ * that, being the service of outstanding requests unpreemptible, a
+ * little fraction of the holes may however be unrecoverable, thereby
+ * causing a little loss of bandwidth.
+ *
+ * The last important point is detecting whether bfqq does need this
+ * bandwidth recovery. In this respect, the next function deems the
+ * process associated with bfqq greedy, and thus allows it to recover
+ * the hole, if: 1) the process is waiting for the arrival of a new
+ * request (which implies that bfqq expired for one of the above two
+ * reasons), and 2) such a request has arrived soon. The first
+ * condition is controlled through the flag non_blocking_wait_rq,
+ * while the second through the flag arrived_in_time. If both
+ * conditions hold, then the function computes the budget in the
+ * above-described special way, and signals that the in-service queue
+ * should be expired. Timestamp back-shifting is done later in
+ * __bfq_activate_entity.
+ *
+ * 2. Reduce latency. Even if timestamps are not backshifted to let
+ * the process associated with bfqq recover a service hole, bfqq may
+ * however happen to have, after being (re)activated, a lower finish
+ * timestamp than the in-service queue.  That is, the next budget of
+ * bfqq may have to be completed before the one of the in-service
+ * queue. If this is the case, then preempting the in-service queue
+ * allows this goal to be achieved, apart from the unpreemptible,
+ * outstanding requests mentioned above.
+ *
+ * Unfortunately, regardless of which of the above two goals one wants
+ * to achieve, service trees need first to be updated to know whether
+ * the in-service queue must be preempted. To have service trees
+ * correctly updated, the in-service queue must be expired and
+ * rescheduled, and bfqq must be scheduled too. This is one of the
+ * most costly operations (in future versions, the scheduling
+ * mechanism may be re-designed in such a way to make it possible to
+ * know whether preemption is needed without needing to update service
+ * trees). In addition, queue preemptions almost always cause random
+ * I/O, and thus loss of throughput. Because of these facts, the next
+ * function adopts the following simple scheme to avoid both costly
+ * operations and too frequent preemptions: it requests the expiration
+ * of the in-service queue (unconditionally) only for queues that need
+ * to recover a hole, or that either are weight-raised or deserve to
+ * be weight-raised.
+ */
+static bool bfq_bfqq_update_budg_for_activation(struct bfq_data *bfqd,
+						struct bfq_queue *bfqq,
+						bool arrived_in_time,
+						bool wr_or_deserves_wr)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+
+	if (bfq_bfqq_non_blocking_wait_rq(bfqq) && arrived_in_time) {
+		/*
+		 * We do not clear the flag non_blocking_wait_rq here, as
+		 * the latter is used in bfq_activate_bfqq to signal
+		 * that timestamps need to be back-shifted (and is
+		 * cleared right after).
+		 */
+
+		/*
+		 * In next assignment we rely on that either
+		 * entity->service or entity->budget are not updated
+		 * on expiration if bfqq is empty (see
+		 * __bfq_bfqq_recalc_budget). Thus both quantities
+		 * remain unchanged after such an expiration, and the
+		 * following statement therefore assigns to
+		 * entity->budget the remaining budget on such an
+		 * expiration. For clarity, entity->service is not
+		 * updated on expiration in any case, and, in normal
+		 * operation, is reset only when bfqq is selected for
+		 * service (see bfq_get_next_queue).
+		 */
+		BUG_ON(bfqq->max_budget < 0);
+		entity->budget = min_t(unsigned long,
+				       bfq_bfqq_budget_left(bfqq),
+				       bfqq->max_budget);
+
+		BUG_ON(entity->budget < 0);
+		return true;
+	}
+
+	BUG_ON(bfqq->max_budget < 0);
+	entity->budget = max_t(unsigned long, bfqq->max_budget,
+			       bfq_serv_to_charge(bfqq->next_rq, bfqq));
+	BUG_ON(entity->budget < 0);
+
+	bfq_clear_bfqq_non_blocking_wait_rq(bfqq);
+	return wr_or_deserves_wr;
+}
+
+static void bfq_update_bfqq_wr_on_rq_arrival(struct bfq_data *bfqd,
+					     struct bfq_queue *bfqq,
+					     unsigned int old_wr_coeff,
+					     bool wr_or_deserves_wr,
+					     bool interactive,
+					     bool in_burst,
+					     bool soft_rt)
+{
+	if (old_wr_coeff == 1 && wr_or_deserves_wr) {
+		/* start a weight-raising period */
+		if (interactive) {
+			bfqq->wr_coeff = bfqd->bfq_wr_coeff;
+			bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
+		} else {
+			bfqq->wr_start_at_switch_to_srt = jiffies;
+			bfqq->wr_coeff = bfqd->bfq_wr_coeff *
+				BFQ_SOFTRT_WEIGHT_FACTOR;
+			bfqq->wr_cur_max_time =
+				bfqd->bfq_wr_rt_max_time;
+		}
+		/*
+		 * If needed, further reduce budget to make sure it is
+		 * close to bfqq's backlog, so as to reduce the
+		 * scheduling-error component due to a too large
+		 * budget. Do not care about throughput consequences,
+		 * but only about latency. Finally, do not assign a
+		 * too small budget either, to avoid increasing
+		 * latency by causing too frequent expirations.
+		 */
+		bfqq->entity.budget = min_t(unsigned long,
+					    bfqq->entity.budget,
+					    2 * bfq_min_budget(bfqd));
+
+		bfq_log_bfqq(bfqd, bfqq,
+			     "wrais starting at %lu, rais_max_time %u",
+			     jiffies,
+			     jiffies_to_msecs(bfqq->wr_cur_max_time));
+	} else if (old_wr_coeff > 1) {
+		if (interactive) { /* update wr coeff and duration */
+			bfqq->wr_coeff = bfqd->bfq_wr_coeff;
+			bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
+		} else if (in_burst) {
+			bfqq->wr_coeff = 1;
+			bfq_log_bfqq(bfqd, bfqq,
+				     "wrais ending at %lu, rais_max_time %u",
+				     jiffies,
+				     jiffies_to_msecs(bfqq->
+						      wr_cur_max_time));
+		} else if (soft_rt) {
+			/*
+			 * The application is now or still meeting the
+			 * requirements for being deemed soft rt.  We
+			 * can then correctly and safely (re)charge
+			 * the weight-raising duration for the
+			 * application with the weight-raising
+			 * duration for soft rt applications.
+			 *
+			 * In particular, doing this recharge now, i.e.,
+			 * before the weight-raising period for the
+			 * application finishes, reduces the probability
+			 * of the following negative scenario:
+			 * 1) the weight of a soft rt application is
+			 *    raised at startup (as for any newly
+			 *    created application),
+			 * 2) since the application is not interactive,
+			 *    at a certain time weight-raising is
+			 *    stopped for the application,
+			 * 3) at that time the application happens to
+			 *    still have pending requests, and hence
+			 *    is destined to not have a chance to be
+			 *    deemed soft rt before these requests are
+			 *    completed (see the comments to the
+			 *    function bfq_bfqq_softrt_next_start()
+			 *    for details on soft rt detection),
+			 * 4) these pending requests experience a high
+			 *    latency because the application is not
+			 *    weight-raised while they are pending.
+			 */
+			if (bfqq->wr_cur_max_time !=
+				bfqd->bfq_wr_rt_max_time) {
+				bfqq->wr_start_at_switch_to_srt =
+					bfqq->last_wr_start_finish;
+                BUG_ON(time_is_after_jiffies(bfqq->last_wr_start_finish));
+
+				bfqq->wr_cur_max_time =
+					bfqd->bfq_wr_rt_max_time;
+				bfqq->wr_coeff = bfqd->bfq_wr_coeff *
+					BFQ_SOFTRT_WEIGHT_FACTOR;
+				bfq_log_bfqq(bfqd, bfqq,
+					     "switching to soft_rt wr");
+			} else
+				bfq_log_bfqq(bfqd, bfqq,
+					"moving forward soft_rt wr duration");
+			bfqq->last_wr_start_finish = jiffies;
+		}
+	}
+}
+
+static bool bfq_bfqq_idle_for_long_time(struct bfq_data *bfqd,
+					struct bfq_queue *bfqq)
+{
+	return bfqq->dispatched == 0 &&
+		time_is_before_jiffies(
+			bfqq->budget_timeout +
+			bfqd->bfq_wr_min_idle_time);
+}
+
+static void bfq_bfqq_handle_idle_busy_switch(struct bfq_data *bfqd,
+					     struct bfq_queue *bfqq,
+					     int old_wr_coeff,
+					     struct request *rq,
+					     bool *interactive)
+{
+	bool soft_rt, in_burst,	wr_or_deserves_wr,
+		bfqq_wants_to_preempt,
+		idle_for_long_time = bfq_bfqq_idle_for_long_time(bfqd, bfqq),
+		/*
+		 * See the comments on
+		 * bfq_bfqq_update_budg_for_activation for
+		 * details on the usage of the next variable.
+		 */
+		arrived_in_time =  ktime_get_ns() <=
+			RQ_BIC(rq)->ttime.last_end_request +
+			bfqd->bfq_slice_idle * 3;
+
+	bfq_log_bfqq(bfqd, bfqq,
+		     "bfq_add_request non-busy: "
+		     "jiffies %lu, in_time %d, idle_long %d busyw %d "
+		     "wr_coeff %u",
+		     jiffies, arrived_in_time,
+		     idle_for_long_time,
+		     bfq_bfqq_non_blocking_wait_rq(bfqq),
+		     old_wr_coeff);
+
+	BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+
+	BUG_ON(bfqq == bfqd->in_service_queue);
+	bfqg_stats_update_io_add(bfqq_group(RQ_BFQQ(rq)), bfqq, rq->cmd_flags);
+
+	/*
+	 * bfqq deserves to be weight-raised if:
+	 * - it is sync,
+	 * - it does not belong to a large burst,
+	 * - it has been idle for enough time or is soft real-time,
+	 * - is linked to a bfq_io_cq (it is not shared in any sense)
+	 */
+	in_burst = bfq_bfqq_in_large_burst(bfqq);
+	soft_rt = bfqd->bfq_wr_max_softrt_rate > 0 &&
+		!in_burst &&
+		time_is_before_jiffies(bfqq->soft_rt_next_start);
+	*interactive =
+		!in_burst &&
+		idle_for_long_time;
+	wr_or_deserves_wr = bfqd->low_latency &&
+		(bfqq->wr_coeff > 1 ||
+		 (bfq_bfqq_sync(bfqq) &&
+		  bfqq->bic && (*interactive || soft_rt)));
+
+	bfq_log_bfqq(bfqd, bfqq,
+		     "bfq_add_request: "
+		     "in_burst %d, "
+		     "soft_rt %d (next %lu), inter %d, bic %p",
+		     bfq_bfqq_in_large_burst(bfqq), soft_rt,
+		     bfqq->soft_rt_next_start,
+		     *interactive,
+		     bfqq->bic);
+
+	/*
+	 * Using the last flag, update budget and check whether bfqq
+	 * may want to preempt the in-service queue.
+	 */
+	bfqq_wants_to_preempt =
+		bfq_bfqq_update_budg_for_activation(bfqd, bfqq,
+						    arrived_in_time,
+						    wr_or_deserves_wr);
+
+	/*
+	 * If bfqq happened to be activated in a burst, but has been
+	 * idle for much more than an interactive queue, then we
+	 * assume that, in the overall I/O initiated in the burst, the
+	 * I/O associated with bfqq is finished. So bfqq does not need
+	 * to be treated as a queue belonging to a burst
+	 * anymore. Accordingly, we reset bfqq's in_large_burst flag
+	 * if set, and remove bfqq from the burst list if it's
+	 * there. We do not decrement burst_size, because the fact
+	 * that bfqq does not need to belong to the burst list any
+	 * more does not invalidate the fact that bfqq was created in
+	 * a burst.
+	 */
+	if (likely(!bfq_bfqq_just_created(bfqq)) &&
+	    idle_for_long_time &&
+	    time_is_before_jiffies(
+		    bfqq->budget_timeout +
+		    msecs_to_jiffies(10000))) {
+		hlist_del_init(&bfqq->burst_list_node);
+		bfq_clear_bfqq_in_large_burst(bfqq);
+	}
+
+	bfq_clear_bfqq_just_created(bfqq);
+
+	if (!bfq_bfqq_IO_bound(bfqq)) {
+		if (arrived_in_time) {
+			bfqq->requests_within_timer++;
+			if (bfqq->requests_within_timer >=
+			    bfqd->bfq_requests_within_timer)
+				bfq_mark_bfqq_IO_bound(bfqq);
+		} else
+			bfqq->requests_within_timer = 0;
+		bfq_log_bfqq(bfqd, bfqq, "requests in time %d",
+			     bfqq->requests_within_timer);
+	}
+
+	if (bfqd->low_latency) {
+		if (unlikely(time_is_after_jiffies(bfqq->split_time)))
+			/* wraparound */
+			bfqq->split_time =
+				jiffies - bfqd->bfq_wr_min_idle_time - 1;
+
+		if (time_is_before_jiffies(bfqq->split_time +
+					   bfqd->bfq_wr_min_idle_time)) {
+			bfq_update_bfqq_wr_on_rq_arrival(bfqd, bfqq,
+							 old_wr_coeff,
+							 wr_or_deserves_wr,
+							 *interactive,
+							 in_burst,
+							 soft_rt);
+
+			if (old_wr_coeff != bfqq->wr_coeff)
+				bfqq->entity.prio_changed = 1;
+		}
+	}
+
+	bfqq->last_idle_bklogged = jiffies;
+	bfqq->service_from_backlogged = 0;
+	bfq_clear_bfqq_softrt_update(bfqq);
+
+	bfq_add_bfqq_busy(bfqd, bfqq);
+
+	/*
+	 * Expire in-service queue only if preemption may be needed
+	 * for guarantees. In this respect, the function
+	 * next_queue_may_preempt just checks a simple, necessary
+	 * condition, and not a sufficient condition based on
+	 * timestamps. In fact, for the latter condition to be
+	 * evaluated, timestamps would need first to be updated, and
+	 * this operation is quite costly (see the comments on the
+	 * function bfq_bfqq_update_budg_for_activation).
+	 */
+	if (bfqd->in_service_queue && bfqq_wants_to_preempt &&
+	    bfqd->in_service_queue->wr_coeff < bfqq->wr_coeff &&
+	    next_queue_may_preempt(bfqd)) {
+		struct bfq_queue *in_serv =
+			bfqd->in_service_queue;
+		BUG_ON(in_serv == bfqq);
+
+		bfq_bfqq_expire(bfqd, bfqd->in_service_queue,
+				false, BFQ_BFQQ_PREEMPTED);
+		BUG_ON(in_serv->entity.budget < 0);
+	}
+}
+
+static void bfq_add_request(struct request *rq)
+{
+	struct bfq_queue *bfqq = RQ_BFQQ(rq);
+	struct bfq_data *bfqd = bfqq->bfqd;
+	struct request *next_rq, *prev;
+	unsigned int old_wr_coeff = bfqq->wr_coeff;
+	bool interactive = false;
+
+	bfq_log_bfqq(bfqd, bfqq, "add_request: size %u %s",
+		     blk_rq_sectors(rq), rq_is_sync(rq) ? "S" : "A");
+
+	if (bfqq->wr_coeff > 1) /* queue is being weight-raised */
+		bfq_log_bfqq(bfqd, bfqq,
+			"raising period dur %u/%u msec, old coeff %u, w %d(%d)",
+			jiffies_to_msecs(jiffies - bfqq->last_wr_start_finish),
+			jiffies_to_msecs(bfqq->wr_cur_max_time),
+			bfqq->wr_coeff,
+			bfqq->entity.weight, bfqq->entity.orig_weight);
+
+	bfqq->queued[rq_is_sync(rq)]++;
+	bfqd->queued++;
+
+	elv_rb_add(&bfqq->sort_list, rq);
+
+	/*
+	 * Check if this request is a better next-to-serve candidate.
+	 */
+	prev = bfqq->next_rq;
+	next_rq = bfq_choose_req(bfqd, bfqq->next_rq, rq, bfqd->last_position);
+	BUG_ON(!next_rq);
+	bfqq->next_rq = next_rq;
+
+	/*
+	 * Adjust priority tree position, if next_rq changes.
+	 */
+	if (prev != bfqq->next_rq)
+		bfq_pos_tree_add_move(bfqd, bfqq);
+
+	if (!bfq_bfqq_busy(bfqq)) /* switching to busy ... */
+		bfq_bfqq_handle_idle_busy_switch(bfqd, bfqq, old_wr_coeff,
+						 rq, &interactive);
+	else {
+		if (bfqd->low_latency && old_wr_coeff == 1 && !rq_is_sync(rq) &&
+		    time_is_before_jiffies(
+				bfqq->last_wr_start_finish +
+				bfqd->bfq_wr_min_inter_arr_async)) {
+			bfqq->wr_coeff = bfqd->bfq_wr_coeff;
+			bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
+
+			bfqd->wr_busy_queues++;
+			bfqq->entity.prio_changed = 1;
+			bfq_log_bfqq(bfqd, bfqq,
+				     "non-idle wrais starting, "
+				     "wr_max_time %u wr_busy %d",
+				     jiffies_to_msecs(bfqq->wr_cur_max_time),
+				     bfqd->wr_busy_queues);
+		}
+		if (prev != bfqq->next_rq)
+			bfq_updated_next_req(bfqd, bfqq);
+	}
+
+	/*
+	 * Assign jiffies to last_wr_start_finish in the following
+	 * cases:
+	 *
+	 * . if bfqq is not going to be weight-raised, because, for
+	 *   non weight-raised queues, last_wr_start_finish stores the
+	 *   arrival time of the last request; as of now, this piece
+	 *   of information is used only for deciding whether to
+	 *   weight-raise async queues
+	 *
+	 * . if bfqq is not weight-raised, because, if bfqq is now
+	 *   switching to weight-raised, then last_wr_start_finish
+	 *   stores the time when weight-raising starts
+	 *
+	 * . if bfqq is interactive, because, regardless of whether
+	 *   bfqq is currently weight-raised, the weight-raising
+	 *   period must start or restart (this case is considered
+	 *   separately because it is not detected by the above
+	 *   conditions, if bfqq is already weight-raised)
+	 *
+	 * last_wr_start_finish has to be updated also if bfqq is soft
+	 * real-time, because the weight-raising period is constantly
+	 * restarted on idle-to-busy transitions for these queues, but
+	 * this is already done in bfq_bfqq_handle_idle_busy_switch if
+	 * needed.
+	 */
+	if (bfqd->low_latency &&
+		(old_wr_coeff == 1 || bfqq->wr_coeff == 1 || interactive))
+		bfqq->last_wr_start_finish = jiffies;
+}
+
+static struct request *bfq_find_rq_fmerge(struct bfq_data *bfqd,
+					  struct bio *bio)
+{
+	struct task_struct *tsk = current;
+	struct bfq_io_cq *bic;
+	struct bfq_queue *bfqq;
+
+	bic = bfq_bic_lookup(bfqd, tsk->io_context);
+	if (!bic)
+		return NULL;
+
+	bfqq = bic_to_bfqq(bic, op_is_sync(bio->bi_opf));
+	if (bfqq)
+		return elv_rb_find(&bfqq->sort_list, bio_end_sector(bio));
+
+	return NULL;
+}
+
+static sector_t get_sdist(sector_t last_pos, struct request *rq)
+{
+	sector_t sdist = 0;
+
+	if (last_pos) {
+		if (last_pos < blk_rq_pos(rq))
+			sdist = blk_rq_pos(rq) - last_pos;
+		else
+			sdist = last_pos - blk_rq_pos(rq);
+	}
+
+	return sdist;
+}
+
+static void bfq_activate_request(struct request_queue *q, struct request *rq)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+	bfqd->rq_in_driver++;
+}
+
+static void bfq_deactivate_request(struct request_queue *q, struct request *rq)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+
+	BUG_ON(bfqd->rq_in_driver == 0);
+	bfqd->rq_in_driver--;
+}
+
+static void bfq_remove_request(struct request *rq)
+{
+	struct bfq_queue *bfqq = RQ_BFQQ(rq);
+	struct bfq_data *bfqd = bfqq->bfqd;
+	const int sync = rq_is_sync(rq);
+
+	BUG_ON(bfqq->entity.service > bfqq->entity.budget &&
+	       bfqq == bfqd->in_service_queue);
+
+	if (bfqq->next_rq == rq) {
+		bfqq->next_rq = bfq_find_next_rq(bfqd, bfqq, rq);
+		bfq_updated_next_req(bfqd, bfqq);
+	}
+
+	if (rq->queuelist.prev != &rq->queuelist)
+		list_del_init(&rq->queuelist);
+	BUG_ON(bfqq->queued[sync] == 0);
+	bfqq->queued[sync]--;
+	bfqd->queued--;
+	elv_rb_del(&bfqq->sort_list, rq);
+
+	if (RB_EMPTY_ROOT(&bfqq->sort_list)) {
+		BUG_ON(bfqq->entity.budget < 0);
+
+		if (bfq_bfqq_busy(bfqq) && bfqq != bfqd->in_service_queue) {
+			bfq_del_bfqq_busy(bfqd, bfqq, false);
+
+			/* bfqq emptied. In normal operation, when
+			 * bfqq is empty, bfqq->entity.service and
+			 * bfqq->entity.budget must contain,
+			 * respectively, the service received and the
+			 * budget used last time bfqq emptied. These
+			 * facts do not hold in this case, as at least
+			 * this last removal occurred while bfqq is
+			 * not in service. To avoid inconsistencies,
+			 * reset both bfqq->entity.service and
+			 * bfqq->entity.budget.
+			 */
+			bfqq->entity.budget = bfqq->entity.service = 0;
+		}
+
+		/*
+		 * Remove queue from request-position tree as it is empty.
+		 */
+		if (bfqq->pos_root) {
+			rb_erase(&bfqq->pos_node, bfqq->pos_root);
+			bfqq->pos_root = NULL;
+		}
+	}
+
+	if (rq->cmd_flags & REQ_META) {
+		BUG_ON(bfqq->meta_pending == 0);
+		bfqq->meta_pending--;
+	}
+	bfqg_stats_update_io_remove(bfqq_group(bfqq), rq->cmd_flags);
+}
+
+static int bfq_merge(struct request_queue *q, struct request **req,
+		     struct bio *bio)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+	struct request *__rq;
+
+	__rq = bfq_find_rq_fmerge(bfqd, bio);
+	if (__rq && elv_bio_merge_ok(__rq, bio)) {
+		*req = __rq;
+		return ELEVATOR_FRONT_MERGE;
+	}
+
+	return ELEVATOR_NO_MERGE;
+}
+
+static void bfq_merged_request(struct request_queue *q, struct request *req,
+			       int type)
+{
+	if (type == ELEVATOR_FRONT_MERGE &&
+	    rb_prev(&req->rb_node) &&
+	    blk_rq_pos(req) <
+	    blk_rq_pos(container_of(rb_prev(&req->rb_node),
+				    struct request, rb_node))) {
+		struct bfq_queue *bfqq = RQ_BFQQ(req);
+		struct bfq_data *bfqd = bfqq->bfqd;
+		struct request *prev, *next_rq;
+
+		/* Reposition request in its sort_list */
+		elv_rb_del(&bfqq->sort_list, req);
+		elv_rb_add(&bfqq->sort_list, req);
+		/* Choose next request to be served for bfqq */
+		prev = bfqq->next_rq;
+		next_rq = bfq_choose_req(bfqd, bfqq->next_rq, req,
+					 bfqd->last_position);
+		BUG_ON(!next_rq);
+		bfqq->next_rq = next_rq;
+		/*
+		 * If next_rq changes, update both the queue's budget to
+		 * fit the new request and the queue's position in its
+		 * rq_pos_tree.
+		 */
+		if (prev != bfqq->next_rq) {
+			bfq_updated_next_req(bfqd, bfqq);
+			bfq_pos_tree_add_move(bfqd, bfqq);
+		}
+	}
+}
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static void bfq_bio_merged(struct request_queue *q, struct request *req,
+			   struct bio *bio)
+{
+	bfqg_stats_update_io_merged(bfqq_group(RQ_BFQQ(req)), bio->bi_opf);
+}
+#endif
+
+static void bfq_merged_requests(struct request_queue *q, struct request *rq,
+				struct request *next)
+{
+	struct bfq_queue *bfqq = RQ_BFQQ(rq), *next_bfqq = RQ_BFQQ(next);
+
+	/*
+	 * If next and rq belong to the same bfq_queue and next is older
+	 * than rq, then reposition rq in the fifo (by substituting next
+	 * with rq). Otherwise, if next and rq belong to different
+	 * bfq_queues, never reposition rq: in fact, we would have to
+	 * reposition it with respect to next's position in its own fifo,
+	 * which would most certainly be too expensive with respect to
+	 * the benefits.
+	 */
+	if (bfqq == next_bfqq &&
+	    !list_empty(&rq->queuelist) && !list_empty(&next->queuelist) &&
+	    next->fifo_time < rq->fifo_time) {
+		list_del_init(&rq->queuelist);
+		list_replace_init(&next->queuelist, &rq->queuelist);
+		rq->fifo_time = next->fifo_time;
+	}
+
+	if (bfqq->next_rq == next)
+		bfqq->next_rq = rq;
+
+	bfq_remove_request(next);
+	bfqg_stats_update_io_merged(bfqq_group(bfqq), next->cmd_flags);
+}
+
+/* Must be called with bfqq != NULL */
+static void bfq_bfqq_end_wr(struct bfq_queue *bfqq)
+{
+	BUG_ON(!bfqq);
+
+	if (bfq_bfqq_busy(bfqq))
+		bfqq->bfqd->wr_busy_queues--;
+	bfqq->wr_coeff = 1;
+	bfqq->wr_cur_max_time = 0;
+	bfqq->last_wr_start_finish = jiffies;
+	/*
+	 * Trigger a weight change on the next invocation of
+	 * __bfq_entity_update_weight_prio.
+	 */
+	bfqq->entity.prio_changed = 1;
+	bfq_log_bfqq(bfqq->bfqd, bfqq,
+		     "end_wr: wrais ending at %lu, rais_max_time %u",
+		     bfqq->last_wr_start_finish,
+		     jiffies_to_msecs(bfqq->wr_cur_max_time));
+	bfq_log_bfqq(bfqq->bfqd, bfqq, "end_wr: wr_busy %d",
+		     bfqq->bfqd->wr_busy_queues);
+}
+
+static void bfq_end_wr_async_queues(struct bfq_data *bfqd,
+				    struct bfq_group *bfqg)
+{
+	int i, j;
+
+	for (i = 0; i < 2; i++)
+		for (j = 0; j < IOPRIO_BE_NR; j++)
+			if (bfqg->async_bfqq[i][j])
+				bfq_bfqq_end_wr(bfqg->async_bfqq[i][j]);
+	if (bfqg->async_idle_bfqq)
+		bfq_bfqq_end_wr(bfqg->async_idle_bfqq);
+}
+
+static void bfq_end_wr(struct bfq_data *bfqd)
+{
+	struct bfq_queue *bfqq;
+
+	spin_lock_irq(bfqd->queue->queue_lock);
+
+	list_for_each_entry(bfqq, &bfqd->active_list, bfqq_list)
+		bfq_bfqq_end_wr(bfqq);
+	list_for_each_entry(bfqq, &bfqd->idle_list, bfqq_list)
+		bfq_bfqq_end_wr(bfqq);
+	bfq_end_wr_async(bfqd);
+
+	spin_unlock_irq(bfqd->queue->queue_lock);
+}
+
+static sector_t bfq_io_struct_pos(void *io_struct, bool request)
+{
+	if (request)
+		return blk_rq_pos(io_struct);
+	else
+		return ((struct bio *)io_struct)->bi_iter.bi_sector;
+}
+
+static int bfq_rq_close_to_sector(void *io_struct, bool request,
+				  sector_t sector)
+{
+	return abs(bfq_io_struct_pos(io_struct, request) - sector) <=
+	       BFQQ_CLOSE_THR;
+}
+
+static struct bfq_queue *bfqq_find_close(struct bfq_data *bfqd,
+					 struct bfq_queue *bfqq,
+					 sector_t sector)
+{
+	struct rb_root *root = &bfq_bfqq_to_bfqg(bfqq)->rq_pos_tree;
+	struct rb_node *parent, *node;
+	struct bfq_queue *__bfqq;
+
+	if (RB_EMPTY_ROOT(root))
+		return NULL;
+
+	/*
+	 * First, if we find a request starting at the end of the last
+	 * request, choose it.
+	 */
+	__bfqq = bfq_rq_pos_tree_lookup(bfqd, root, sector, &parent, NULL);
+	if (__bfqq)
+		return __bfqq;
+
+	/*
+	 * If the exact sector wasn't found, the parent of the NULL leaf
+	 * will contain the closest sector (rq_pos_tree sorted by
+	 * next_request position).
+	 */
+	__bfqq = rb_entry(parent, struct bfq_queue, pos_node);
+	if (bfq_rq_close_to_sector(__bfqq->next_rq, true, sector))
+		return __bfqq;
+
+	if (blk_rq_pos(__bfqq->next_rq) < sector)
+		node = rb_next(&__bfqq->pos_node);
+	else
+		node = rb_prev(&__bfqq->pos_node);
+	if (!node)
+		return NULL;
+
+	__bfqq = rb_entry(node, struct bfq_queue, pos_node);
+	if (bfq_rq_close_to_sector(__bfqq->next_rq, true, sector))
+		return __bfqq;
+
+	return NULL;
+}
+
+static struct bfq_queue *bfq_find_close_cooperator(struct bfq_data *bfqd,
+						   struct bfq_queue *cur_bfqq,
+						   sector_t sector)
+{
+	struct bfq_queue *bfqq;
+
+	/*
+	 * We shall notice if some of the queues are cooperating,
+	 * e.g., working closely on the same area of the device. In
+	 * that case, we can group them together and: 1) don't waste
+	 * time idling, and 2) serve the union of their requests in
+	 * the best possible order for throughput.
+	 */
+	bfqq = bfqq_find_close(bfqd, cur_bfqq, sector);
+	if (!bfqq || bfqq == cur_bfqq)
+		return NULL;
+
+	return bfqq;
+}
+
+static struct bfq_queue *
+bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
+{
+	int process_refs, new_process_refs;
+	struct bfq_queue *__bfqq;
+
+	/*
+	 * If there are no process references on the new_bfqq, then it is
+	 * unsafe to follow the ->new_bfqq chain as other bfqq's in the chain
+	 * may have dropped their last reference (not just their last process
+	 * reference).
+	 */
+	if (!bfqq_process_refs(new_bfqq))
+		return NULL;
+
+	/* Avoid a circular list and skip interim queue merges. */
+	while ((__bfqq = new_bfqq->new_bfqq)) {
+		if (__bfqq == bfqq)
+			return NULL;
+		new_bfqq = __bfqq;
+	}
+
+	process_refs = bfqq_process_refs(bfqq);
+	new_process_refs = bfqq_process_refs(new_bfqq);
+	/*
+	 * If the process for the bfqq has gone away, there is no
+	 * sense in merging the queues.
+	 */
+	if (process_refs == 0 || new_process_refs == 0)
+		return NULL;
+
+	bfq_log_bfqq(bfqq->bfqd, bfqq, "scheduling merge with queue %d",
+		new_bfqq->pid);
+
+	/*
+	 * Merging is just a redirection: the requests of the process
+	 * owning one of the two queues are redirected to the other queue.
+	 * The latter queue, in its turn, is set as shared if this is the
+	 * first time that the requests of some process are redirected to
+	 * it.
+	 *
+	 * We redirect bfqq to new_bfqq and not the opposite, because we
+	 * are in the context of the process owning bfqq, hence we have
+	 * the io_cq of this process. So we can immediately configure this
+	 * io_cq to redirect the requests of the process to new_bfqq.
+	 *
+	 * NOTE, even if new_bfqq coincides with the in-service queue, the
+	 * io_cq of new_bfqq is not available, because, if the in-service
+	 * queue is shared, bfqd->in_service_bic may not point to the
+	 * io_cq of the in-service queue.
+	 * Redirecting the requests of the process owning bfqq to the
+	 * currently in-service queue is in any case the best option, as
+	 * we feed the in-service queue with new requests close to the
+	 * last request served and, by doing so, hopefully increase the
+	 * throughput.
+	 */
+	bfqq->new_bfqq = new_bfqq;
+	new_bfqq->ref += process_refs;
+	return new_bfqq;
+}
+
+static bool bfq_may_be_close_cooperator(struct bfq_queue *bfqq,
+					struct bfq_queue *new_bfqq)
+{
+	if (bfq_class_idle(bfqq) || bfq_class_idle(new_bfqq) ||
+	    (bfqq->ioprio_class != new_bfqq->ioprio_class))
+		return false;
+
+	/*
+	 * If either of the queues has already been detected as seeky,
+	 * then merging it with the other queue is unlikely to lead to
+	 * sequential I/O.
+	 */
+	if (BFQQ_SEEKY(bfqq) || BFQQ_SEEKY(new_bfqq))
+		return false;
+
+	/*
+	 * Interleaved I/O is known to be done by (some) applications
+	 * only for reads, so it does not make sense to merge async
+	 * queues.
+	 */
+	if (!bfq_bfqq_sync(bfqq) || !bfq_bfqq_sync(new_bfqq))
+		return false;
+
+	return true;
+}
+
+/*
+ * If this function returns true, then bfqq cannot be merged. The idea
+ * is that true cooperation happens very early after processes start
+ * to do I/O. Usually, late cooperations are just accidental false
+ * positives. In case bfqq is weight-raised, such false positives
+ * would evidently degrade latency guarantees for bfqq.
+ */
+bool wr_from_too_long(struct bfq_queue *bfqq)
+{
+	return bfqq->wr_coeff > 1 &&
+		time_is_before_jiffies(bfqq->last_wr_start_finish +
+				       msecs_to_jiffies(100));
+}
+
+/*
+ * Attempt to schedule a merge of bfqq with the currently in-service
+ * queue or with a close queue among the scheduled queues.  Return
+ * NULL if no merge was scheduled, a pointer to the shared bfq_queue
+ * structure otherwise.
+ *
+ * The OOM queue is not allowed to participate to cooperation: in fact, since
+ * the requests temporarily redirected to the OOM queue could be redirected
+ * again to dedicated queues at any time, the state needed to correctly
+ * handle merging with the OOM queue would be quite complex and expensive
+ * to maintain. Besides, in such a critical condition as an out of memory,
+ * the benefits of queue merging may be little relevant, or even negligible.
+ *
+ * Weight-raised queues can be merged only if their weight-raising
+ * period has just started. In fact cooperating processes are usually
+ * started together. Thus, with this filter we avoid false positives
+ * that would jeopardize low-latency guarantees.
+ *
+ * WARNING: queue merging may impair fairness among non-weight raised
+ * queues, for at least two reasons: 1) the original weight of a
+ * merged queue may change during the merged state, 2) even being the
+ * weight the same, a merged queue may be bloated with many more
+ * requests than the ones produced by its originally-associated
+ * process.
+ */
+static struct bfq_queue *
+bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+		     void *io_struct, bool request)
+{
+	struct bfq_queue *in_service_bfqq, *new_bfqq;
+
+	if (bfqq->new_bfqq)
+		return bfqq->new_bfqq;
+
+	if (io_struct && wr_from_too_long(bfqq) &&
+	    likely(bfqq != &bfqd->oom_bfqq))
+		bfq_log_bfqq(bfqd, bfqq,
+			     "would have looked for coop, but bfq%d wr",
+			bfqq->pid);
+
+	if (!io_struct ||
+	    wr_from_too_long(bfqq) ||
+	    unlikely(bfqq == &bfqd->oom_bfqq))
+		return NULL;
+
+	/* If there is only one backlogged queue, don't search. */
+	if (bfqd->busy_queues == 1)
+		return NULL;
+
+	in_service_bfqq = bfqd->in_service_queue;
+
+	if (in_service_bfqq && in_service_bfqq != bfqq &&
+	    bfqd->in_service_bic && wr_from_too_long(in_service_bfqq)
+	    && likely(in_service_bfqq == &bfqd->oom_bfqq))
+		bfq_log_bfqq(bfqd, bfqq,
+		"would have tried merge with in-service-queue, but wr");
+
+	if (!in_service_bfqq || in_service_bfqq == bfqq ||
+	    !bfqd->in_service_bic || wr_from_too_long(in_service_bfqq) ||
+	    unlikely(in_service_bfqq == &bfqd->oom_bfqq))
+		goto check_scheduled;
+
+	if (bfq_rq_close_to_sector(io_struct, request, bfqd->last_position) &&
+	    bfqq->entity.parent == in_service_bfqq->entity.parent &&
+	    bfq_may_be_close_cooperator(bfqq, in_service_bfqq)) {
+		new_bfqq = bfq_setup_merge(bfqq, in_service_bfqq);
+		if (new_bfqq)
+			return new_bfqq;
+	}
+	/*
+	 * Check whether there is a cooperator among currently scheduled
+	 * queues. The only thing we need is that the bio/request is not
+	 * NULL, as we need it to establish whether a cooperator exists.
+	 */
+check_scheduled:
+	new_bfqq = bfq_find_close_cooperator(bfqd, bfqq,
+			bfq_io_struct_pos(io_struct, request));
+
+	BUG_ON(new_bfqq && bfqq->entity.parent != new_bfqq->entity.parent);
+
+	if (new_bfqq && wr_from_too_long(new_bfqq) &&
+	    likely(new_bfqq != &bfqd->oom_bfqq) &&
+	    bfq_may_be_close_cooperator(bfqq, new_bfqq))
+		bfq_log_bfqq(bfqd, bfqq,
+			     "would have merged with bfq%d, but wr",
+			     new_bfqq->pid);
+
+	if (new_bfqq && !wr_from_too_long(new_bfqq) &&
+	    likely(new_bfqq != &bfqd->oom_bfqq) &&
+	    bfq_may_be_close_cooperator(bfqq, new_bfqq))
+		return bfq_setup_merge(bfqq, new_bfqq);
+
+	return NULL;
+}
+
+static void bfq_bfqq_save_state(struct bfq_queue *bfqq)
+{
+	struct bfq_io_cq *bic = bfqq->bic;
+
+	/*
+	 * If !bfqq->bic, the queue is already shared or its requests
+	 * have already been redirected to a shared queue; both idle window
+	 * and weight raising state have already been saved. Do nothing.
+	 */
+	if (!bic)
+		return;
+
+	bic->saved_idle_window = bfq_bfqq_idle_window(bfqq);
+	bic->saved_IO_bound = bfq_bfqq_IO_bound(bfqq);
+	bic->saved_in_large_burst = bfq_bfqq_in_large_burst(bfqq);
+	bic->was_in_burst_list = !hlist_unhashed(&bfqq->burst_list_node);
+	bic->saved_wr_coeff = bfqq->wr_coeff;
+	bic->saved_wr_start_at_switch_to_srt = bfqq->wr_start_at_switch_to_srt;
+	bic->saved_last_wr_start_finish = bfqq->last_wr_start_finish;
+	bic->saved_wr_cur_max_time = bfqq->wr_cur_max_time;
+	BUG_ON(time_is_after_jiffies(bfqq->last_wr_start_finish));
+}
+
+static void bfq_get_bic_reference(struct bfq_queue *bfqq)
+{
+	/*
+	 * If bfqq->bic has a non-NULL value, the bic to which it belongs
+	 * is about to begin using a shared bfq_queue.
+	 */
+	if (bfqq->bic)
+		atomic_long_inc(&bfqq->bic->icq.ioc->refcount);
+}
+
+static void
+bfq_merge_bfqqs(struct bfq_data *bfqd, struct bfq_io_cq *bic,
+		struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
+{
+	bfq_log_bfqq(bfqd, bfqq, "merging with queue %lu",
+		     (unsigned long) new_bfqq->pid);
+	/* Save weight raising and idle window of the merged queues */
+	bfq_bfqq_save_state(bfqq);
+	bfq_bfqq_save_state(new_bfqq);
+	if (bfq_bfqq_IO_bound(bfqq))
+		bfq_mark_bfqq_IO_bound(new_bfqq);
+	bfq_clear_bfqq_IO_bound(bfqq);
+
+	/*
+	 * If bfqq is weight-raised, then let new_bfqq inherit
+	 * weight-raising. To reduce false positives, neglect the case
+	 * where bfqq has just been created, but has not yet made it
+	 * to be weight-raised (which may happen because EQM may merge
+	 * bfqq even before bfq_add_request is executed for the first
+	 * time for bfqq). Handling this case would however be very
+	 * easy, thanks to the flag just_created.
+	 */
+	if (new_bfqq->wr_coeff == 1 && bfqq->wr_coeff > 1) {
+		new_bfqq->wr_coeff = bfqq->wr_coeff;
+		new_bfqq->wr_cur_max_time = bfqq->wr_cur_max_time;
+		new_bfqq->last_wr_start_finish = bfqq->last_wr_start_finish;
+		new_bfqq->wr_start_at_switch_to_srt = bfqq->wr_start_at_switch_to_srt;
+		if (bfq_bfqq_busy(new_bfqq))
+			bfqd->wr_busy_queues++;
+		new_bfqq->entity.prio_changed = 1;
+		bfq_log_bfqq(bfqd, new_bfqq,
+			     "wr start after merge with %d, rais_max_time %u",
+			     bfqq->pid,
+			     jiffies_to_msecs(bfqq->wr_cur_max_time));
+	}
+
+	if (bfqq->wr_coeff > 1) { /* bfqq has given its wr to new_bfqq */
+		bfqq->wr_coeff = 1;
+		bfqq->entity.prio_changed = 1;
+		if (bfq_bfqq_busy(bfqq))
+			bfqd->wr_busy_queues--;
+	}
+
+	bfq_log_bfqq(bfqd, new_bfqq, "merge_bfqqs: wr_busy %d",
+		     bfqd->wr_busy_queues);
+
+	/*
+	 * Grab a reference to the bic, to prevent it from being destroyed
+	 * before being possibly touched by a bfq_split_bfqq().
+	 */
+	bfq_get_bic_reference(bfqq);
+	bfq_get_bic_reference(new_bfqq);
+	/*
+	 * Merge queues (that is, let bic redirect its requests to new_bfqq)
+	 */
+	bic_set_bfqq(bic, new_bfqq, 1);
+	bfq_mark_bfqq_coop(new_bfqq);
+	/*
+	 * new_bfqq now belongs to at least two bics (it is a shared queue):
+	 * set new_bfqq->bic to NULL. bfqq either:
+	 * - does not belong to any bic any more, and hence bfqq->bic must
+	 *   be set to NULL, or
+	 * - is a queue whose owning bics have already been redirected to a
+	 *   different queue, hence the queue is destined to not belong to
+	 *   any bic soon and bfqq->bic is already NULL (therefore the next
+	 *   assignment causes no harm).
+	 */
+	new_bfqq->bic = NULL;
+	bfqq->bic = NULL;
+	bfq_put_queue(bfqq);
+}
+
+static int bfq_allow_bio_merge(struct request_queue *q, struct request *rq,
+			       struct bio *bio)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+	bool is_sync = op_is_sync(bio->bi_opf);
+	struct bfq_io_cq *bic;
+	struct bfq_queue *bfqq, *new_bfqq;
+
+	/*
+	 * Disallow merge of a sync bio into an async request.
+	 */
+	if (is_sync && !rq_is_sync(rq))
+		return false;
+
+	/*
+	 * Lookup the bfqq that this bio will be queued with. Allow
+	 * merge only if rq is queued there.
+	 * Queue lock is held here.
+	 */
+	bic = bfq_bic_lookup(bfqd, current->io_context);
+	if (!bic)
+		return false;
+
+	bfqq = bic_to_bfqq(bic, is_sync);
+	/*
+	 * We take advantage of this function to perform an early merge
+	 * of the queues of possible cooperating processes.
+	 */
+	if (bfqq) {
+		new_bfqq = bfq_setup_cooperator(bfqd, bfqq, bio, false);
+		if (new_bfqq) {
+			bfq_merge_bfqqs(bfqd, bic, bfqq, new_bfqq);
+			/*
+			 * If we get here, the bio will be queued in the
+			 * shared queue, i.e., new_bfqq, so use new_bfqq
+			 * to decide whether bio and rq can be merged.
+			 */
+			bfqq = new_bfqq;
+		}
+	}
+
+	return bfqq == RQ_BFQQ(rq);
+}
+
+static int bfq_allow_rq_merge(struct request_queue *q, struct request *rq,
+			      struct request *next)
+{
+	return RQ_BFQQ(rq) == RQ_BFQQ(next);
+}
+
+/*
+ * Set the maximum time for the in-service queue to consume its
+ * budget. This prevents seeky processes from lowering the throughput.
+ * In practice, a time-slice service scheme is used with seeky
+ * processes.
+ */
+static void bfq_set_budget_timeout(struct bfq_data *bfqd,
+				   struct bfq_queue *bfqq)
+{
+	unsigned int timeout_coeff;
+
+	if (bfqq->wr_cur_max_time == bfqd->bfq_wr_rt_max_time)
+		timeout_coeff = 1;
+	else
+		timeout_coeff = bfqq->entity.weight / bfqq->entity.orig_weight;
+
+	bfqd->last_budget_start = ktime_get();
+
+	bfqq->budget_timeout = jiffies +
+		bfqd->bfq_timeout * timeout_coeff;
+
+	bfq_log_bfqq(bfqd, bfqq, "set budget_timeout %u",
+		jiffies_to_msecs(bfqd->bfq_timeout * timeout_coeff));
+}
+
+static void __bfq_set_in_service_queue(struct bfq_data *bfqd,
+				       struct bfq_queue *bfqq)
+{
+	if (bfqq) {
+		bfqg_stats_update_avg_queue_size(bfqq_group(bfqq));
+		bfq_mark_bfqq_must_alloc(bfqq);
+		bfq_clear_bfqq_fifo_expire(bfqq);
+
+		bfqd->budgets_assigned = (bfqd->budgets_assigned*7 + 256) / 8;
+
+		BUG_ON(bfqq == bfqd->in_service_queue);
+		BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list));
+
+		if (time_is_before_jiffies(bfqq->last_wr_start_finish) &&
+		    bfqq->wr_coeff > 1 &&
+		    bfqq->wr_cur_max_time == bfqd->bfq_wr_rt_max_time &&
+		    time_is_before_jiffies(bfqq->budget_timeout)) {
+			/*
+			 * For soft real-time queues, move the start
+			 * of the weight-raising period forward by the
+			 * time the queue has not received any
+			 * service. Otherwise, a relatively long
+			 * service delay is likely to cause the
+			 * weight-raising period of the queue to end,
+			 * because of the short duration of the
+			 * weight-raising period of a soft real-time
+			 * queue.  It is worth noting that this move
+			 * is not so dangerous for the other queues,
+			 * because soft real-time queues are not
+			 * greedy.
+			 *
+			 * To not add a further variable, we use the
+			 * overloaded field budget_timeout to
+			 * determine for how long the queue has not
+			 * received service, i.e., how much time has
+			 * elapsed since the queue expired. However,
+			 * this is a little imprecise, because
+			 * budget_timeout is set to jiffies if bfqq
+			 * not only expires, but also remains with no
+			 * request.
+			 */
+			if (time_after(bfqq->budget_timeout,
+				       bfqq->last_wr_start_finish))
+				bfqq->last_wr_start_finish +=
+					jiffies - bfqq->budget_timeout;
+			else
+				bfqq->last_wr_start_finish = jiffies;
+
+			if (time_is_after_jiffies(bfqq->last_wr_start_finish)) {
+			       pr_crit(
+			       "BFQ WARNING:last %lu budget %lu jiffies %lu",
+			       bfqq->last_wr_start_finish,
+			       bfqq->budget_timeout,
+			       jiffies);
+			       pr_crit("diff %lu", jiffies -
+				       max_t(unsigned long,
+					     bfqq->last_wr_start_finish,
+					     bfqq->budget_timeout));
+			       bfqq->last_wr_start_finish = jiffies;
+			}
+		}
+
+		bfq_set_budget_timeout(bfqd, bfqq);
+		bfq_log_bfqq(bfqd, bfqq,
+			     "set_in_service_queue, cur-budget = %d",
+			     bfqq->entity.budget);
+	} else
+		bfq_log(bfqd, "set_in_service_queue: NULL");
+
+	bfqd->in_service_queue = bfqq;
+}
+
+/*
+ * Get and set a new queue for service.
+ */
+static struct bfq_queue *bfq_set_in_service_queue(struct bfq_data *bfqd)
+{
+	struct bfq_queue *bfqq = bfq_get_next_queue(bfqd);
+
+	__bfq_set_in_service_queue(bfqd, bfqq);
+	return bfqq;
+}
+
+static void bfq_arm_slice_timer(struct bfq_data *bfqd)
+{
+	struct bfq_queue *bfqq = bfqd->in_service_queue;
+	struct bfq_io_cq *bic;
+	u32 sl;
+
+	BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list));
+
+	/* Processes have exited, don't wait. */
+	bic = bfqd->in_service_bic;
+	if (!bic || atomic_read(&bic->icq.ioc->active_ref) == 0)
+		return;
+
+	bfq_mark_bfqq_wait_request(bfqq);
+
+	/*
+	 * We don't want to idle for seeks, but we do want to allow
+	 * fair distribution of slice time for a process doing back-to-back
+	 * seeks. So allow a little bit of time for him to submit a new rq.
+	 *
+	 * To prevent processes with (partly) seeky workloads from
+	 * being too ill-treated, grant them a small fraction of the
+	 * assigned budget before reducing the waiting time to
+	 * BFQ_MIN_TT. This happened to help reduce latency.
+	 */
+	sl = bfqd->bfq_slice_idle;
+	/*
+	 * Unless the queue is being weight-raised or the scenario is
+	 * asymmetric, grant only minimum idle time if the queue
+	 * is seeky. A long idling is preserved for a weight-raised
+	 * queue, or, more in general, in an asymemtric scenario,
+	 * because a long idling is needed for guaranteeing to a queue
+	 * its reserved share of the throughput (in particular, it is
+	 * needed if the queue has a higher weight than some other
+	 * queue).
+	 */
+	if (BFQQ_SEEKY(bfqq) && bfqq->wr_coeff == 1 &&
+	    bfq_symmetric_scenario(bfqd))
+		sl = min_t(u32, sl, BFQ_MIN_TT);
+
+	bfqd->last_idling_start = ktime_get();
+	hrtimer_start(&bfqd->idle_slice_timer, ns_to_ktime(sl),
+		      HRTIMER_MODE_REL);
+	bfqg_stats_set_start_idle_time(bfqq_group(bfqq));
+	bfq_log(bfqd, "arm idle: %ld/%ld ms",
+		sl / NSEC_PER_MSEC, bfqd->bfq_slice_idle / NSEC_PER_MSEC);
+}
+
+/*
+ * In autotuning mode, max_budget is dynamically recomputed as the
+ * amount of sectors transferred in timeout at the estimated peak
+ * rate. This enables BFQ to utilize a full timeslice with a full
+ * budget, even if the in-service queue is served at peak rate. And
+ * this maximises throughput with sequential workloads.
+ */
+static unsigned long bfq_calc_max_budget(struct bfq_data *bfqd)
+{
+	return (u64)bfqd->peak_rate * USEC_PER_MSEC *
+		jiffies_to_msecs(bfqd->bfq_timeout)>>BFQ_RATE_SHIFT;
+}
+
+/*
+ * Update parameters related to throughput and responsiveness, as a
+ * function of the estimated peak rate. See comments on
+ * bfq_calc_max_budget(), and on T_slow and T_fast arrays.
+ */
+void update_thr_responsiveness_params(struct bfq_data *bfqd)
+{
+	int dev_type = blk_queue_nonrot(bfqd->queue);
+
+	if (bfqd->bfq_user_max_budget == 0) {
+		bfqd->bfq_max_budget =
+			bfq_calc_max_budget(bfqd);
+		BUG_ON(bfqd->bfq_max_budget < 0);
+		bfq_log(bfqd, "new max_budget = %d",
+			bfqd->bfq_max_budget);
+	}
+
+	if (bfqd->device_speed == BFQ_BFQD_FAST &&
+	    bfqd->peak_rate < device_speed_thresh[dev_type]) {
+		bfqd->device_speed = BFQ_BFQD_SLOW;
+		bfqd->RT_prod = R_slow[dev_type] *
+			T_slow[dev_type];
+	} else if (bfqd->device_speed == BFQ_BFQD_SLOW &&
+		   bfqd->peak_rate > device_speed_thresh[dev_type]) {
+		bfqd->device_speed = BFQ_BFQD_FAST;
+		bfqd->RT_prod = R_fast[dev_type] *
+			T_fast[dev_type];
+	}
+
+	bfq_log(bfqd,
+"dev_type %s dev_speed_class = %s (%llu sects/sec), thresh %llu setcs/sec",
+		dev_type == 0 ? "ROT" : "NONROT",
+		bfqd->device_speed == BFQ_BFQD_FAST ? "FAST" : "SLOW",
+		bfqd->device_speed == BFQ_BFQD_FAST ?
+		(USEC_PER_SEC*(u64)R_fast[dev_type])>>BFQ_RATE_SHIFT :
+		(USEC_PER_SEC*(u64)R_slow[dev_type])>>BFQ_RATE_SHIFT,
+		(USEC_PER_SEC*(u64)device_speed_thresh[dev_type])>>
+		BFQ_RATE_SHIFT);
+}
+
+void bfq_reset_rate_computation(struct bfq_data *bfqd, struct request *rq)
+{
+	if (rq != NULL) { /* new rq dispatch now, reset accordingly */
+		bfqd->last_dispatch = bfqd->first_dispatch = ktime_get_ns() ;
+		bfqd->peak_rate_samples = 1;
+		bfqd->sequential_samples = 0;
+		bfqd->tot_sectors_dispatched = bfqd->last_rq_max_size =
+			blk_rq_sectors(rq);
+	} else /* no new rq dispatched, just reset the number of samples */
+		bfqd->peak_rate_samples = 0; /* full re-init on next disp. */
+
+	bfq_log(bfqd,
+		"reset_rate_computation at end, sample %u/%u tot_sects %llu",
+		bfqd->peak_rate_samples, bfqd->sequential_samples,
+		bfqd->tot_sectors_dispatched);
+}
+
+void bfq_update_rate_reset(struct bfq_data *bfqd, struct request *rq)
+{
+	u32 rate, weight, divisor;
+
+	/*
+	 * For the convergence property to hold (see comments on
+	 * bfq_update_peak_rate()) and for the assessment to be
+	 * reliable, a minimum number of samples must be present, and
+	 * a minimum amount of time must have elapsed. If not so, do
+	 * not compute new rate. Just reset parameters, to get ready
+	 * for a new evaluation attempt.
+	 */
+	if (bfqd->peak_rate_samples < BFQ_RATE_MIN_SAMPLES ||
+	    bfqd->delta_from_first < BFQ_RATE_MIN_INTERVAL) {
+		bfq_log(bfqd,
+	"update_rate_reset: only resetting, delta_first %lluus samples %d",
+			bfqd->delta_from_first>>10, bfqd->peak_rate_samples);
+		goto reset_computation;
+	}
+
+	/*
+	 * If a new request completion has occurred after last
+	 * dispatch, then, to approximate the rate at which requests
+	 * have been served by the device, it is more precise to
+	 * extend the observation interval to the last completion.
+	 */
+	bfqd->delta_from_first =
+		max_t(u64, bfqd->delta_from_first,
+		      bfqd->last_completion - bfqd->first_dispatch);
+
+	BUG_ON(bfqd->delta_from_first == 0);
+	/*
+	 * Rate computed in sects/usec, and not sects/nsec, for
+	 * precision issues.
+	 */
+	rate = div64_ul(bfqd->tot_sectors_dispatched<<BFQ_RATE_SHIFT,
+			div_u64(bfqd->delta_from_first, NSEC_PER_USEC));
+
+	bfq_log(bfqd,
+"update_rate_reset: tot_sects %llu delta_first %lluus rate %llu sects/s (%d)",
+		bfqd->tot_sectors_dispatched, bfqd->delta_from_first>>10,
+		((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT),
+		rate > 20<<BFQ_RATE_SHIFT);
+
+	/*
+	 * Peak rate not updated if:
+	 * - the percentage of sequential dispatches is below 3/4 of the
+	 *   total, and rate is below the current estimated peak rate
+	 * - rate is unreasonably high (> 20M sectors/sec)
+	 */
+	if ((bfqd->peak_rate_samples > (3 * bfqd->sequential_samples)>>2 &&
+	     rate <= bfqd->peak_rate) ||
+		rate > 20<<BFQ_RATE_SHIFT) {
+		bfq_log(bfqd,
+		"update_rate_reset: goto reset, samples %u/%u rate/peak %llu/%llu",
+		bfqd->peak_rate_samples, bfqd->sequential_samples,
+		((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT),
+		((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT));
+		goto reset_computation;
+	} else {
+		bfq_log(bfqd,
+		"update_rate_reset: do update, samples %u/%u rate/peak %llu/%llu",
+		bfqd->peak_rate_samples, bfqd->sequential_samples,
+		((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT),
+		((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT));
+	}
+
+	/*
+	 * We have to update the peak rate, at last! To this purpose,
+	 * we use a low-pass filter. We compute the smoothing constant
+	 * of the filter as a function of the 'weight' of the new
+	 * measured rate.
+	 *
+	 * As can be seen in next formulas, we define this weight as a
+	 * quantity proportional to how sequential the workload is,
+	 * and to how long the observation time interval is.
+	 *
+	 * The weight runs from 0 to 8. The maximum value of the
+	 * weight, 8, yields the minimum value for the smoothing
+	 * constant. At this minimum value for the smoothing constant,
+	 * the measured rate contributes for half of the next value of
+	 * the estimated peak rate.
+	 *
+	 * So, the first step is to compute the weight as a function
+	 * of how sequential the workload is. Note that the weight
+	 * cannot reach 9, because bfqd->sequential_samples cannot
+	 * become equal to bfqd->peak_rate_samples, which, in its
+	 * turn, holds true because bfqd->sequential_samples is not
+	 * incremented for the first sample.
+	 */
+	weight = (9 * bfqd->sequential_samples) / bfqd->peak_rate_samples;
+
+	/*
+	 * Second step: further refine the weight as a function of the
+	 * duration of the observation interval.
+	 */
+	weight = min_t(u32, 8,
+		       div_u64(weight * bfqd->delta_from_first,
+			       BFQ_RATE_REF_INTERVAL));
+
+	/*
+	 * Divisor ranging from 10, for minimum weight, to 2, for
+	 * maximum weight.
+	 */
+	divisor = 10 - weight;
+	BUG_ON(divisor == 0);
+
+	/*
+	 * Finally, update peak rate:
+	 *
+	 * peak_rate = peak_rate * (divisor-1) / divisor  +  rate / divisor
+	 */
+	bfqd->peak_rate *= divisor-1;
+	bfqd->peak_rate /= divisor;
+	rate /= divisor; /* smoothing constant alpha = 1/divisor */
+
+	bfq_log(bfqd,
+		"update_rate_reset: divisor %d tmp_peak_rate %llu tmp_rate %u",
+		divisor,
+		((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT),
+		(u32)((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT));
+
+	BUG_ON(bfqd->peak_rate == 0);
+	BUG_ON(bfqd->peak_rate > 20<<BFQ_RATE_SHIFT);
+
+	bfqd->peak_rate += rate;
+	update_thr_responsiveness_params(bfqd);
+	BUG_ON(bfqd->peak_rate > 20<<BFQ_RATE_SHIFT);
+
+reset_computation:
+	bfq_reset_rate_computation(bfqd, rq);
+}
+
+/*
+ * Update the read/write peak rate (the main quantity used for
+ * auto-tuning, see update_thr_responsiveness_params()).
+ *
+ * It is not trivial to estimate the peak rate (correctly): because of
+ * the presence of sw and hw queues between the scheduler and the
+ * device components that finally serve I/O requests, it is hard to
+ * say exactly when a given dispatched request is served inside the
+ * device, and for how long. As a consequence, it is hard to know
+ * precisely at what rate a given set of requests is actually served
+ * by the device.
+ *
+ * On the opposite end, the dispatch time of any request is trivially
+ * available, and, from this piece of information, the "dispatch rate"
+ * of requests can be immediately computed. So, the idea in the next
+ * function is to use what is known, namely request dispatch times
+ * (plus, when useful, request completion times), to estimate what is
+ * unknown, namely in-device request service rate.
+ *
+ * The main issue is that, because of the above facts, the rate at
+ * which a certain set of requests is dispatched over a certain time
+ * interval can vary greatly with respect to the rate at which the
+ * same requests are then served. But, since the size of any
+ * intermediate queue is limited, and the service scheme is lossless
+ * (no request is silently dropped), the following obvious convergence
+ * property holds: the number of requests dispatched MUST become
+ * closer and closer to the number of requests completed as the
+ * observation interval grows. This is the key property used in
+ * the next function to estimate the peak service rate as a function
+ * of the observed dispatch rate. The function assumes to be invoked
+ * on every request dispatch.
+ */
+void bfq_update_peak_rate(struct bfq_data *bfqd, struct request *rq)
+{
+	u64 now_ns = ktime_get_ns();
+
+	if (bfqd->peak_rate_samples == 0) { /* first dispatch */
+		bfq_log(bfqd,
+		"update_peak_rate: goto reset, samples %d",
+				bfqd->peak_rate_samples) ;
+		bfq_reset_rate_computation(bfqd, rq);
+		goto update_last_values; /* will add one sample */
+	}
+
+	/*
+	 * Device idle for very long: the observation interval lasting
+	 * up to this dispatch cannot be a valid observation interval
+	 * for computing a new peak rate (similarly to the late-
+	 * completion event in bfq_completed_request()). Go to
+	 * update_rate_and_reset to have the following three steps
+	 * taken:
+	 * - close the observation interval at the last (previous)
+	 *   request dispatch or completion
+	 * - compute rate, if possible, for that observation interval
+	 * - start a new observation interval with this dispatch
+	 */
+	if (now_ns - bfqd->last_dispatch > 100*NSEC_PER_MSEC &&
+	    bfqd->rq_in_driver == 0) {
+		bfq_log(bfqd,
+"update_peak_rate: jumping to updating&resetting delta_last %lluus samples %d",
+			(now_ns - bfqd->last_dispatch)>>10,
+			bfqd->peak_rate_samples) ;
+		goto update_rate_and_reset;
+	}
+
+	/* Update sampling information */
+	bfqd->peak_rate_samples++;
+
+	if ((bfqd->rq_in_driver > 0 ||
+		now_ns - bfqd->last_completion < BFQ_MIN_TT)
+	     && get_sdist(bfqd->last_position, rq) < BFQQ_SEEK_THR)
+		bfqd->sequential_samples++;
+
+	bfqd->tot_sectors_dispatched += blk_rq_sectors(rq);
+
+	/* Reset max observed rq size every 32 dispatches */
+	if (likely(bfqd->peak_rate_samples % 32))
+		bfqd->last_rq_max_size =
+			max_t(u32, blk_rq_sectors(rq), bfqd->last_rq_max_size);
+	else
+		bfqd->last_rq_max_size = blk_rq_sectors(rq);
+
+	bfqd->delta_from_first = now_ns - bfqd->first_dispatch;
+
+	bfq_log(bfqd,
+	"update_peak_rate: added samples %u/%u tot_sects %llu delta_first %lluus",
+		bfqd->peak_rate_samples, bfqd->sequential_samples,
+		bfqd->tot_sectors_dispatched,
+		bfqd->delta_from_first>>10);
+
+	/* Target observation interval not yet reached, go on sampling */
+	if (bfqd->delta_from_first < BFQ_RATE_REF_INTERVAL)
+		goto update_last_values;
+
+update_rate_and_reset:
+	bfq_update_rate_reset(bfqd, rq);
+update_last_values:
+	bfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
+	bfqd->last_dispatch = now_ns;
+
+	bfq_log(bfqd,
+	"update_peak_rate: delta_first %lluus last_pos %llu peak_rate %llu",
+		(now_ns - bfqd->first_dispatch)>>10,
+		(unsigned long long) bfqd->last_position,
+		((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT));
+	bfq_log(bfqd,
+	"update_peak_rate: samples at end %d", bfqd->peak_rate_samples);
+}
+
+/*
+ * Move request from internal lists to the dispatch list of the request queue
+ */
+static void bfq_dispatch_insert(struct request_queue *q, struct request *rq)
+{
+	struct bfq_queue *bfqq = RQ_BFQQ(rq);
+
+	/*
+	 * For consistency, the next instruction should have been executed
+	 * after removing the request from the queue and dispatching it.
+	 * We execute instead this instruction before bfq_remove_request()
+	 * (and hence introduce a temporary inconsistency), for efficiency.
+	 * In fact, in a forced_dispatch, this prevents two counters related
+	 * to bfqq->dispatched to risk to be uselessly decremented if bfqq
+	 * is not in service, and then to be incremented again after
+	 * incrementing bfqq->dispatched.
+	 */
+	bfqq->dispatched++;
+	bfq_update_peak_rate(q->elevator->elevator_data, rq);
+
+	bfq_remove_request(rq);
+	elv_dispatch_sort(q, rq);
+}
+
+/*
+ * Return expired entry, or NULL to just start from scratch in rbtree.
+ */
+static struct request *bfq_check_fifo(struct bfq_queue *bfqq)
+{
+	struct request *rq = NULL;
+
+	if (bfq_bfqq_fifo_expire(bfqq))
+		return NULL;
+
+	bfq_mark_bfqq_fifo_expire(bfqq);
+
+	if (list_empty(&bfqq->fifo))
+		return NULL;
+
+	rq = rq_entry_fifo(bfqq->fifo.next);
+
+	if (ktime_get_ns() < rq->fifo_time)
+		return NULL;
+
+	return rq;
+}
+
+static void __bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	BUG_ON(bfqq != bfqd->in_service_queue);
+
+	/*
+	 * If this bfqq is shared between multiple processes, check
+	 * to make sure that those processes are still issuing I/Os
+	 * within the mean seek distance. If not, it may be time to
+	 * break the queues apart again.
+	 */
+	if (bfq_bfqq_coop(bfqq) && BFQQ_SEEKY(bfqq))
+		bfq_mark_bfqq_split_coop(bfqq);
+
+	if (RB_EMPTY_ROOT(&bfqq->sort_list)) {
+		if (bfqq->dispatched == 0)
+			/*
+			 * Overloading budget_timeout field to store
+			 * the time at which the queue remains with no
+			 * backlog and no outstanding request; used by
+			 * the weight-raising mechanism.
+			 */
+			bfqq->budget_timeout = jiffies;
+
+		bfq_del_bfqq_busy(bfqd, bfqq, true);
+	} else {
+		bfq_requeue_bfqq(bfqd, bfqq);
+		/*
+		 * Resort priority tree of potential close cooperators.
+		 */
+		bfq_pos_tree_add_move(bfqd, bfqq);
+	}
+
+	/*
+	 * All in-service entities must have been properly deactivated
+	 * or requeued before executing the next function, which
+	 * resets all in-service entites as no more in service.
+	 */
+	__bfq_bfqd_reset_in_service(bfqd);
+}
+
+/**
+ * __bfq_bfqq_recalc_budget - try to adapt the budget to the @bfqq behavior.
+ * @bfqd: device data.
+ * @bfqq: queue to update.
+ * @reason: reason for expiration.
+ *
+ * Handle the feedback on @bfqq budget at queue expiration.
+ * See the body for detailed comments.
+ */
+static void __bfq_bfqq_recalc_budget(struct bfq_data *bfqd,
+				     struct bfq_queue *bfqq,
+				     enum bfqq_expiration reason)
+{
+	struct request *next_rq;
+	int budget, min_budget;
+
+	BUG_ON(bfqq != bfqd->in_service_queue);
+
+	min_budget = bfq_min_budget(bfqd);
+
+	if (bfqq->wr_coeff == 1)
+		budget = bfqq->max_budget;
+	else /*
+	      * Use a constant, low budget for weight-raised queues,
+	      * to help achieve a low latency. Keep it slightly higher
+	      * than the minimum possible budget, to cause a little
+	      * bit fewer expirations.
+	      */
+		budget = 2 * min_budget;
+
+	bfq_log_bfqq(bfqd, bfqq, "recalc_budg: last budg %d, budg left %d",
+		bfqq->entity.budget, bfq_bfqq_budget_left(bfqq));
+	bfq_log_bfqq(bfqd, bfqq, "recalc_budg: last max_budg %d, min budg %d",
+		budget, bfq_min_budget(bfqd));
+	bfq_log_bfqq(bfqd, bfqq, "recalc_budg: sync %d, seeky %d",
+		bfq_bfqq_sync(bfqq), BFQQ_SEEKY(bfqd->in_service_queue));
+
+	if (bfq_bfqq_sync(bfqq) && bfqq->wr_coeff == 1) {
+		switch (reason) {
+		/*
+		 * Caveat: in all the following cases we trade latency
+		 * for throughput.
+		 */
+		case BFQ_BFQQ_TOO_IDLE:
+			/*
+			 * This is the only case where we may reduce
+			 * the budget: if there is no request of the
+			 * process still waiting for completion, then
+			 * we assume (tentatively) that the timer has
+			 * expired because the batch of requests of
+			 * the process could have been served with a
+			 * smaller budget.  Hence, betting that
+			 * process will behave in the same way when it
+			 * becomes backlogged again, we reduce its
+			 * next budget.  As long as we guess right,
+			 * this budget cut reduces the latency
+			 * experienced by the process.
+			 *
+			 * However, if there are still outstanding
+			 * requests, then the process may have not yet
+			 * issued its next request just because it is
+			 * still waiting for the completion of some of
+			 * the still outstanding ones.  So in this
+			 * subcase we do not reduce its budget, on the
+			 * contrary we increase it to possibly boost
+			 * the throughput, as discussed in the
+			 * comments to the BUDGET_TIMEOUT case.
+			 */
+			if (bfqq->dispatched > 0) /* still outstanding reqs */
+				budget = min(budget * 2, bfqd->bfq_max_budget);
+			else {
+				if (budget > 5 * min_budget)
+					budget -= 4 * min_budget;
+				else
+					budget = min_budget;
+			}
+			break;
+		case BFQ_BFQQ_BUDGET_TIMEOUT:
+			/*
+			 * We double the budget here because it gives
+			 * the chance to boost the throughput if this
+			 * is not a seeky process (and has bumped into
+			 * this timeout because of, e.g., ZBR).
+			 */
+			budget = min(budget * 2, bfqd->bfq_max_budget);
+			break;
+		case BFQ_BFQQ_BUDGET_EXHAUSTED:
+			/*
+			 * The process still has backlog, and did not
+			 * let either the budget timeout or the disk
+			 * idling timeout expire. Hence it is not
+			 * seeky, has a short thinktime and may be
+			 * happy with a higher budget too. So
+			 * definitely increase the budget of this good
+			 * candidate to boost the disk throughput.
+			 */
+			budget = min(budget * 4, bfqd->bfq_max_budget);
+			break;
+		case BFQ_BFQQ_NO_MORE_REQUESTS:
+			/*
+			 * For queues that expire for this reason, it
+			 * is particularly important to keep the
+			 * budget close to the actual service they
+			 * need. Doing so reduces the timestamp
+			 * misalignment problem described in the
+			 * comments in the body of
+			 * __bfq_activate_entity. In fact, suppose
+			 * that a queue systematically expires for
+			 * BFQ_BFQQ_NO_MORE_REQUESTS and presents a
+			 * new request in time to enjoy timestamp
+			 * back-shifting. The larger the budget of the
+			 * queue is with respect to the service the
+			 * queue actually requests in each service
+			 * slot, the more times the queue can be
+			 * reactivated with the same virtual finish
+			 * time. It follows that, even if this finish
+			 * time is pushed to the system virtual time
+			 * to reduce the consequent timestamp
+			 * misalignment, the queue unjustly enjoys for
+			 * many re-activations a lower finish time
+			 * than all newly activated queues.
+			 *
+			 * The service needed by bfqq is measured
+			 * quite precisely by bfqq->entity.service.
+			 * Since bfqq does not enjoy device idling,
+			 * bfqq->entity.service is equal to the number
+			 * of sectors that the process associated with
+			 * bfqq requested to read/write before waiting
+			 * for request completions, or blocking for
+			 * other reasons.
+			 */
+			budget = max_t(int, bfqq->entity.service, min_budget);
+			break;
+		default:
+			return;
+		}
+	} else if (!bfq_bfqq_sync(bfqq))
+		/*
+		 * Async queues get always the maximum possible
+		 * budget, as for them we do not care about latency
+		 * (in addition, their ability to dispatch is limited
+		 * by the charging factor).
+		 */
+		budget = bfqd->bfq_max_budget;
+
+	bfqq->max_budget = budget;
+
+	if (bfqd->budgets_assigned >= bfq_stats_min_budgets &&
+	    !bfqd->bfq_user_max_budget)
+		bfqq->max_budget = min(bfqq->max_budget, bfqd->bfq_max_budget);
+
+	/*
+	 * If there is still backlog, then assign a new budget, making
+	 * sure that it is large enough for the next request.  Since
+	 * the finish time of bfqq must be kept in sync with the
+	 * budget, be sure to call __bfq_bfqq_expire() *after* this
+	 * update.
+	 *
+	 * If there is no backlog, then no need to update the budget;
+	 * it will be updated on the arrival of a new request.
+	 */
+	next_rq = bfqq->next_rq;
+	if (next_rq) {
+		BUG_ON(reason == BFQ_BFQQ_TOO_IDLE ||
+		       reason == BFQ_BFQQ_NO_MORE_REQUESTS);
+		bfqq->entity.budget = max_t(unsigned long, bfqq->max_budget,
+					    bfq_serv_to_charge(next_rq, bfqq));
+		BUG_ON(!bfq_bfqq_busy(bfqq));
+		BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list));
+	}
+
+	bfq_log_bfqq(bfqd, bfqq, "head sect: %u, new budget %d",
+			next_rq ? blk_rq_sectors(next_rq) : 0,
+			bfqq->entity.budget);
+}
+
+/*
+ * Return true if the process associated with bfqq is "slow". The slow
+ * flag is used, in addition to the budget timeout, to reduce the
+ * amount of service provided to seeky processes, and thus reduce
+ * their chances to lower the throughput. More details in the comments
+ * on the function bfq_bfqq_expire().
+ *
+ * An important observation is in order: as discussed in the comments
+ * on the function bfq_update_peak_rate(), with devices with internal
+ * queues, it is hard if ever possible to know when and for how long
+ * an I/O request is processed by the device (apart from the trivial
+ * I/O pattern where a new request is dispatched only after the
+ * previous one has been completed). This makes it hard to evaluate
+ * the real rate at which the I/O requests of each bfq_queue are
+ * served.  In fact, for an I/O scheduler like BFQ, serving a
+ * bfq_queue means just dispatching its requests during its service
+ * slot (i.e., until the budget of the queue is exhausted, or the
+ * queue remains idle, or, finally, a timeout fires). But, during the
+ * service slot of a bfq_queue, around 100 ms at most, the device may
+ * be even still processing requests of bfq_queues served in previous
+ * service slots. On the opposite end, the requests of the in-service
+ * bfq_queue may be completed after the service slot of the queue
+ * finishes.
+ *
+ * Anyway, unless more sophisticated solutions are used
+ * (where possible), the sum of the sizes of the requests dispatched
+ * during the service slot of a bfq_queue is probably the only
+ * approximation available for the service received by the bfq_queue
+ * during its service slot. And this sum is the quantity used in this
+ * function to evaluate the I/O speed of a process.
+ */
+static bool bfq_bfqq_is_slow(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+				 bool compensate, enum bfqq_expiration reason,
+				 unsigned long *delta_ms)
+{
+	ktime_t delta_ktime;
+	u32 delta_usecs;
+	bool slow = BFQQ_SEEKY(bfqq); /* if delta too short, use seekyness */
+
+	if (!bfq_bfqq_sync(bfqq))
+		return false;
+
+	if (compensate)
+		delta_ktime = bfqd->last_idling_start;
+	else
+		delta_ktime = ktime_get();
+	delta_ktime = ktime_sub(delta_ktime, bfqd->last_budget_start);
+	delta_usecs = ktime_to_us(delta_ktime);
+
+	/* don't trust short/unrealistic values. */
+	if (delta_usecs < 1000 || delta_usecs >= LONG_MAX) {
+		if (blk_queue_nonrot(bfqd->queue))
+			 /*
+			  * give same worst-case guarantees as idling
+			  * for seeky
+			  */
+			*delta_ms = BFQ_MIN_TT / NSEC_PER_MSEC;
+		else /* charge at least one seek */
+			*delta_ms = bfq_slice_idle / NSEC_PER_MSEC;
+
+		bfq_log(bfqd, "bfq_bfqq_is_slow: unrealistic %u", delta_usecs);
+
+		return slow;
+	}
+
+	*delta_ms = delta_usecs / USEC_PER_MSEC;
+
+	/*
+	 * Use only long (> 20ms) intervals to filter out excessive
+	 * spikes in service rate estimation.
+	 */
+	if (delta_usecs > 20000) {
+		/*
+		 * Caveat for rotational devices: processes doing I/O
+		 * in the slower disk zones tend to be slow(er) even
+		 * if not seeky. In this respect, the estimated peak
+		 * rate is likely to be an average over the disk
+		 * surface. Accordingly, to not be too harsh with
+		 * unlucky processes, a process is deemed slow only if
+		 * its rate has been lower than half of the estimated
+		 * peak rate.
+		 */
+		slow = bfqq->entity.service < bfqd->bfq_max_budget / 2;
+		bfq_log(bfqd, "bfq_bfqq_is_slow: relative rate %d/%d",
+			bfqq->entity.service, bfqd->bfq_max_budget);
+	}
+
+	bfq_log_bfqq(bfqd, bfqq, "bfq_bfqq_is_slow: slow %d", slow);
+
+	return slow;
+}
+
+/*
+ * To be deemed as soft real-time, an application must meet two
+ * requirements. First, the application must not require an average
+ * bandwidth higher than the approximate bandwidth required to playback or
+ * record a compressed high-definition video.
+ * The next function is invoked on the completion of the last request of a
+ * batch, to compute the next-start time instant, soft_rt_next_start, such
+ * that, if the next request of the application does not arrive before
+ * soft_rt_next_start, then the above requirement on the bandwidth is met.
+ *
+ * The second requirement is that the request pattern of the application is
+ * isochronous, i.e., that, after issuing a request or a batch of requests,
+ * the application stops issuing new requests until all its pending requests
+ * have been completed. After that, the application may issue a new batch,
+ * and so on.
+ * For this reason the next function is invoked to compute
+ * soft_rt_next_start only for applications that meet this requirement,
+ * whereas soft_rt_next_start is set to infinity for applications that do
+ * not.
+ *
+ * Unfortunately, even a greedy application may happen to behave in an
+ * isochronous way if the CPU load is high. In fact, the application may
+ * stop issuing requests while the CPUs are busy serving other processes,
+ * then restart, then stop again for a while, and so on. In addition, if
+ * the disk achieves a low enough throughput with the request pattern
+ * issued by the application (e.g., because the request pattern is random
+ * and/or the device is slow), then the application may meet the above
+ * bandwidth requirement too. To prevent such a greedy application to be
+ * deemed as soft real-time, a further rule is used in the computation of
+ * soft_rt_next_start: soft_rt_next_start must be higher than the current
+ * time plus the maximum time for which the arrival of a request is waited
+ * for when a sync queue becomes idle, namely bfqd->bfq_slice_idle.
+ * This filters out greedy applications, as the latter issue instead their
+ * next request as soon as possible after the last one has been completed
+ * (in contrast, when a batch of requests is completed, a soft real-time
+ * application spends some time processing data).
+ *
+ * Unfortunately, the last filter may easily generate false positives if
+ * only bfqd->bfq_slice_idle is used as a reference time interval and one
+ * or both the following cases occur:
+ * 1) HZ is so low that the duration of a jiffy is comparable to or higher
+ *    than bfqd->bfq_slice_idle. This happens, e.g., on slow devices with
+ *    HZ=100.
+ * 2) jiffies, instead of increasing at a constant rate, may stop increasing
+ *    for a while, then suddenly 'jump' by several units to recover the lost
+ *    increments. This seems to happen, e.g., inside virtual machines.
+ * To address this issue, we do not use as a reference time interval just
+ * bfqd->bfq_slice_idle, but bfqd->bfq_slice_idle plus a few jiffies. In
+ * particular we add the minimum number of jiffies for which the filter
+ * seems to be quite precise also in embedded systems and KVM/QEMU virtual
+ * machines.
+ */
+static unsigned long bfq_bfqq_softrt_next_start(struct bfq_data *bfqd,
+						struct bfq_queue *bfqq)
+{
+	bfq_log_bfqq(bfqd, bfqq,
+"softrt_next_start: service_blkg %lu soft_rate %u sects/sec interval %u",
+		     bfqq->service_from_backlogged,
+		     bfqd->bfq_wr_max_softrt_rate,
+		     jiffies_to_msecs(HZ * bfqq->service_from_backlogged /
+				      bfqd->bfq_wr_max_softrt_rate));
+
+	return max(bfqq->last_idle_bklogged +
+		   HZ * bfqq->service_from_backlogged /
+		   bfqd->bfq_wr_max_softrt_rate,
+		   jiffies + nsecs_to_jiffies(bfqq->bfqd->bfq_slice_idle) + 4);
+}
+
+/*
+ * Return the farthest future time instant according to jiffies
+ * macros.
+ */
+static unsigned long bfq_greatest_from_now(void)
+{
+	return jiffies + MAX_JIFFY_OFFSET;
+}
+
+/*
+ * Return the farthest past time instant according to jiffies
+ * macros.
+ */
+static unsigned long bfq_smallest_from_now(void)
+{
+	return jiffies - MAX_JIFFY_OFFSET;
+}
+
+/**
+ * bfq_bfqq_expire - expire a queue.
+ * @bfqd: device owning the queue.
+ * @bfqq: the queue to expire.
+ * @compensate: if true, compensate for the time spent idling.
+ * @reason: the reason causing the expiration.
+ *
+ * If the process associated with bfqq does slow I/O (e.g., because it
+ * issues random requests), we charge bfqq with the time it has been
+ * in service instead of the service it has received (see
+ * bfq_bfqq_charge_time for details on how this goal is achieved). As
+ * a consequence, bfqq will typically get higher timestamps upon
+ * reactivation, and hence it will be rescheduled as if it had
+ * received more service than what it has actually received. In the
+ * end, bfqq receives less service in proportion to how slowly its
+ * associated process consumes its budgets (and hence how seriously it
+ * tends to lower the throughput). In addition, this time-charging
+ * strategy guarantees time fairness among slow processes. In
+ * contrast, if the process associated with bfqq is not slow, we
+ * charge bfqq exactly with the service it has received.
+ *
+ * Charging time to the first type of queues and the exact service to
+ * the other has the effect of using the WF2Q+ policy to schedule the
+ * former on a timeslice basis, without violating service domain
+ * guarantees among the latter.
+ */
+static void bfq_bfqq_expire(struct bfq_data *bfqd,
+			    struct bfq_queue *bfqq,
+			    bool compensate,
+			    enum bfqq_expiration reason)
+{
+	bool slow;
+	unsigned long delta = 0;
+	struct bfq_entity *entity = &bfqq->entity;
+
+	BUG_ON(bfqq != bfqd->in_service_queue);
+
+	/*
+	 * Check whether the process is slow (see bfq_bfqq_is_slow).
+	 */
+	slow = bfq_bfqq_is_slow(bfqd, bfqq, compensate, reason, &delta);
+
+	/*
+	 * Increase service_from_backlogged before next statement,
+	 * because the possible next invocation of
+	 * bfq_bfqq_charge_time would likely inflate
+	 * entity->service. In contrast, service_from_backlogged must
+	 * contain real service, to enable the soft real-time
+	 * heuristic to correctly compute the bandwidth consumed by
+	 * bfqq.
+	 */
+	bfqq->service_from_backlogged += entity->service;
+
+	/*
+	 * As above explained, charge slow (typically seeky) and
+	 * timed-out queues with the time and not the service
+	 * received, to favor sequential workloads.
+	 *
+	 * Processes doing I/O in the slower disk zones will tend to
+	 * be slow(er) even if not seeky. Therefore, since the
+	 * estimated peak rate is actually an average over the disk
+	 * surface, these processes may timeout just for bad luck. To
+	 * avoid punishing them, do not charge time to processes that
+	 * succeeded in consuming at least 2/3 of their budget. This
+	 * allows BFQ to preserve enough elasticity to still perform
+	 * bandwidth, and not time, distribution with little unlucky
+	 * or quasi-sequential processes.
+	 */
+	if (bfqq->wr_coeff == 1 &&
+	    (slow ||
+	     (reason == BFQ_BFQQ_BUDGET_TIMEOUT &&
+	      bfq_bfqq_budget_left(bfqq) >=  entity->budget / 3)))
+		bfq_bfqq_charge_time(bfqd, bfqq, delta);
+
+	BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+
+	if (reason == BFQ_BFQQ_TOO_IDLE &&
+	    entity->service <= 2 * entity->budget / 10)
+		bfq_clear_bfqq_IO_bound(bfqq);
+
+	if (bfqd->low_latency && bfqq->wr_coeff == 1)
+		bfqq->last_wr_start_finish = jiffies;
+
+	if (bfqd->low_latency && bfqd->bfq_wr_max_softrt_rate > 0 &&
+	    RB_EMPTY_ROOT(&bfqq->sort_list)) {
+		/*
+		 * If we get here, and there are no outstanding
+		 * requests, then the request pattern is isochronous
+		 * (see the comments on the function
+		 * bfq_bfqq_softrt_next_start()). Thus we can compute
+		 * soft_rt_next_start. If, instead, the queue still
+		 * has outstanding requests, then we have to wait for
+		 * the completion of all the outstanding requests to
+		 * discover whether the request pattern is actually
+		 * isochronous.
+		 */
+		BUG_ON(bfqd->busy_queues < 1);
+		if (bfqq->dispatched == 0) {
+			bfqq->soft_rt_next_start =
+				bfq_bfqq_softrt_next_start(bfqd, bfqq);
+			bfq_log_bfqq(bfqd, bfqq, "new soft_rt_next %lu",
+				     bfqq->soft_rt_next_start);
+		} else {
+			/*
+			 * The application is still waiting for the
+			 * completion of one or more requests:
+			 * prevent it from possibly being incorrectly
+			 * deemed as soft real-time by setting its
+			 * soft_rt_next_start to infinity. In fact,
+			 * without this assignment, the application
+			 * would be incorrectly deemed as soft
+			 * real-time if:
+			 * 1) it issued a new request before the
+			 *    completion of all its in-flight
+			 *    requests, and
+			 * 2) at that time, its soft_rt_next_start
+			 *    happened to be in the past.
+			 */
+			bfqq->soft_rt_next_start =
+				bfq_greatest_from_now();
+			/*
+			 * Schedule an update of soft_rt_next_start to when
+			 * the task may be discovered to be isochronous.
+			 */
+			bfq_mark_bfqq_softrt_update(bfqq);
+		}
+	}
+
+	bfq_log_bfqq(bfqd, bfqq,
+		"expire (%d, slow %d, num_disp %d, idle_win %d, weight %d)",
+		     reason, slow, bfqq->dispatched,
+		     bfq_bfqq_idle_window(bfqq), entity->weight);
+
+	/*
+	 * Increase, decrease or leave budget unchanged according to
+	 * reason.
+	 */
+	BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+	__bfq_bfqq_recalc_budget(bfqd, bfqq, reason);
+	BUG_ON(bfqq->next_rq == NULL &&
+	       bfqq->entity.budget < bfqq->entity.service);
+	__bfq_bfqq_expire(bfqd, bfqq);
+
+	BUG_ON(!bfq_bfqq_busy(bfqq) && reason == BFQ_BFQQ_BUDGET_EXHAUSTED &&
+		!bfq_class_idle(bfqq));
+
+	if (!bfq_bfqq_busy(bfqq) &&
+	    reason != BFQ_BFQQ_BUDGET_TIMEOUT &&
+	    reason != BFQ_BFQQ_BUDGET_EXHAUSTED)
+		bfq_mark_bfqq_non_blocking_wait_rq(bfqq);
+}
+
+/*
+ * Budget timeout is not implemented through a dedicated timer, but
+ * just checked on request arrivals and completions, as well as on
+ * idle timer expirations.
+ */
+static bool bfq_bfqq_budget_timeout(struct bfq_queue *bfqq)
+{
+	return time_is_before_eq_jiffies(bfqq->budget_timeout);
+}
+
+/*
+ * If we expire a queue that is actively waiting (i.e., with the
+ * device idled) for the arrival of a new request, then we may incur
+ * the timestamp misalignment problem described in the body of the
+ * function __bfq_activate_entity. Hence we return true only if this
+ * condition does not hold, or if the queue is slow enough to deserve
+ * only to be kicked off for preserving a high throughput.
+ */
+static bool bfq_may_expire_for_budg_timeout(struct bfq_queue *bfqq)
+{
+	bfq_log_bfqq(bfqq->bfqd, bfqq,
+		"may_budget_timeout: wait_request %d left %d timeout %d",
+		bfq_bfqq_wait_request(bfqq),
+			bfq_bfqq_budget_left(bfqq) >=  bfqq->entity.budget / 3,
+		bfq_bfqq_budget_timeout(bfqq));
+
+	return (!bfq_bfqq_wait_request(bfqq) ||
+		bfq_bfqq_budget_left(bfqq) >=  bfqq->entity.budget / 3)
+		&&
+		bfq_bfqq_budget_timeout(bfqq);
+}
+
+/*
+ * For a queue that becomes empty, device idling is allowed only if
+ * this function returns true for that queue. As a consequence, since
+ * device idling plays a critical role for both throughput boosting
+ * and service guarantees, the return value of this function plays a
+ * critical role as well.
+ *
+ * In a nutshell, this function returns true only if idling is
+ * beneficial for throughput or, even if detrimental for throughput,
+ * idling is however necessary to preserve service guarantees (low
+ * latency, desired throughput distribution, ...). In particular, on
+ * NCQ-capable devices, this function tries to return false, so as to
+ * help keep the drives' internal queues full, whenever this helps the
+ * device boost the throughput without causing any service-guarantee
+ * issue.
+ *
+ * In more detail, the return value of this function is obtained by,
+ * first, computing a number of boolean variables that take into
+ * account throughput and service-guarantee issues, and, then,
+ * combining these variables in a logical expression. Most of the
+ * issues taken into account are not trivial. We discuss these issues
+ * while introducing the variables.
+ */
+static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
+{
+	struct bfq_data *bfqd = bfqq->bfqd;
+	bool idling_boosts_thr, idling_boosts_thr_without_issues,
+		idling_needed_for_service_guarantees,
+		asymmetric_scenario;
+
+	if (bfqd->strict_guarantees)
+		return true;
+
+	/*
+	 * The next variable takes into account the cases where idling
+	 * boosts the throughput.
+	 *
+	 * The value of the variable is computed considering, first, that
+	 * idling is virtually always beneficial for the throughput if:
+	 * (a) the device is not NCQ-capable, or
+	 * (b) regardless of the presence of NCQ, the device is rotational
+	 *     and the request pattern for bfqq is I/O-bound and sequential.
+	 *
+	 * Secondly, and in contrast to the above item (b), idling an
+	 * NCQ-capable flash-based device would not boost the
+	 * throughput even with sequential I/O; rather it would lower
+	 * the throughput in proportion to how fast the device
+	 * is. Accordingly, the next variable is true if any of the
+	 * above conditions (a) and (b) is true, and, in particular,
+	 * happens to be false if bfqd is an NCQ-capable flash-based
+	 * device.
+	 */
+	idling_boosts_thr = !bfqd->hw_tag ||
+		(!blk_queue_nonrot(bfqd->queue) && bfq_bfqq_IO_bound(bfqq) &&
+		 bfq_bfqq_idle_window(bfqq));
+
+	/*
+	 * The value of the next variable,
+	 * idling_boosts_thr_without_issues, is equal to that of
+	 * idling_boosts_thr, unless a special case holds. In this
+	 * special case, described below, idling may cause problems to
+	 * weight-raised queues.
+	 *
+	 * When the request pool is saturated (e.g., in the presence
+	 * of write hogs), if the processes associated with
+	 * non-weight-raised queues ask for requests at a lower rate,
+	 * then processes associated with weight-raised queues have a
+	 * higher probability to get a request from the pool
+	 * immediately (or at least soon) when they need one. Thus
+	 * they have a higher probability to actually get a fraction
+	 * of the device throughput proportional to their high
+	 * weight. This is especially true with NCQ-capable drives,
+	 * which enqueue several requests in advance, and further
+	 * reorder internally-queued requests.
+	 *
+	 * For this reason, we force to false the value of
+	 * idling_boosts_thr_without_issues if there are weight-raised
+	 * busy queues. In this case, and if bfqq is not weight-raised,
+	 * this guarantees that the device is not idled for bfqq (if,
+	 * instead, bfqq is weight-raised, then idling will be
+	 * guaranteed by another variable, see below). Combined with
+	 * the timestamping rules of BFQ (see [1] for details), this
+	 * behavior causes bfqq, and hence any sync non-weight-raised
+	 * queue, to get a lower number of requests served, and thus
+	 * to ask for a lower number of requests from the request
+	 * pool, before the busy weight-raised queues get served
+	 * again. This often mitigates starvation problems in the
+	 * presence of heavy write workloads and NCQ, thereby
+	 * guaranteeing a higher application and system responsiveness
+	 * in these hostile scenarios.
+	 */
+	idling_boosts_thr_without_issues = idling_boosts_thr &&
+		bfqd->wr_busy_queues == 0;
+
+	/*
+	 * There is then a case where idling must be performed not
+	 * for throughput concerns, but to preserve service
+	 * guarantees.
+	 *
+	 * To introduce this case, we can note that allowing the drive
+	 * to enqueue more than one request at a time, and hence
+	 * delegating de facto final scheduling decisions to the
+	 * drive's internal scheduler, entails loss of control on the
+	 * actual request service order. In particular, the critical
+	 * situation is when requests from different processes happen
+	 * to be present, at the same time, in the internal queue(s)
+	 * of the drive. In such a situation, the drive, by deciding
+	 * the service order of the internally-queued requests, does
+	 * determine also the actual throughput distribution among
+	 * these processes. But the drive typically has no notion or
+	 * concern about per-process throughput distribution, and
+	 * makes its decisions only on a per-request basis. Therefore,
+	 * the service distribution enforced by the drive's internal
+	 * scheduler is likely to coincide with the desired
+	 * device-throughput distribution only in a completely
+	 * symmetric scenario where:
+	 * (i)  each of these processes must get the same throughput as
+	 *      the others;
+	 * (ii) all these processes have the same I/O pattern
+	 *      (either sequential or random).
+	 * In fact, in such a scenario, the drive will tend to treat
+	 * the requests of each of these processes in about the same
+	 * way as the requests of the others, and thus to provide
+	 * each of these processes with about the same throughput
+	 * (which is exactly the desired throughput distribution). In
+	 * contrast, in any asymmetric scenario, device idling is
+	 * certainly needed to guarantee that bfqq receives its
+	 * assigned fraction of the device throughput (see [1] for
+	 * details).
+	 *
+	 * We address this issue by controlling, actually, only the
+	 * symmetry sub-condition (i), i.e., provided that
+	 * sub-condition (i) holds, idling is not performed,
+	 * regardless of whether sub-condition (ii) holds. In other
+	 * words, only if sub-condition (i) holds, then idling is
+	 * allowed, and the device tends to be prevented from queueing
+	 * many requests, possibly of several processes. The reason
+	 * for not controlling also sub-condition (ii) is that we
+	 * exploit preemption to preserve guarantees in case of
+	 * symmetric scenarios, even if (ii) does not hold, as
+	 * explained in the next two paragraphs.
+	 *
+	 * Even if a queue, say Q, is expired when it remains idle, Q
+	 * can still preempt the new in-service queue if the next
+	 * request of Q arrives soon (see the comments on
+	 * bfq_bfqq_update_budg_for_activation). If all queues and
+	 * groups have the same weight, this form of preemption,
+	 * combined with the hole-recovery heuristic described in the
+	 * comments on function bfq_bfqq_update_budg_for_activation,
+	 * are enough to preserve a correct bandwidth distribution in
+	 * the mid term, even without idling. In fact, even if not
+	 * idling allows the internal queues of the device to contain
+	 * many requests, and thus to reorder requests, we can rather
+	 * safely assume that the internal scheduler still preserves a
+	 * minimum of mid-term fairness. The motivation for using
+	 * preemption instead of idling is that, by not idling,
+	 * service guarantees are preserved without minimally
+	 * sacrificing throughput. In other words, both a high
+	 * throughput and its desired distribution are obtained.
+	 *
+	 * More precisely, this preemption-based, idleless approach
+	 * provides fairness in terms of IOPS, and not sectors per
+	 * second. This can be seen with a simple example. Suppose
+	 * that there are two queues with the same weight, but that
+	 * the first queue receives requests of 8 sectors, while the
+	 * second queue receives requests of 1024 sectors. In
+	 * addition, suppose that each of the two queues contains at
+	 * most one request at a time, which implies that each queue
+	 * always remains idle after it is served. Finally, after
+	 * remaining idle, each queue receives very quickly a new
+	 * request. It follows that the two queues are served
+	 * alternatively, preempting each other if needed. This
+	 * implies that, although both queues have the same weight,
+	 * the queue with large requests receives a service that is
+	 * 1024/8 times as high as the service received by the other
+	 * queue.
+	 *
+	 * On the other hand, device idling is performed, and thus
+	 * pure sector-domain guarantees are provided, for the
+	 * following queues, which are likely to need stronger
+	 * throughput guarantees: weight-raised queues, and queues
+	 * with a higher weight than other queues. When such queues
+	 * are active, sub-condition (i) is false, which triggers
+	 * device idling.
+	 *
+	 * According to the above considerations, the next variable is
+	 * true (only) if sub-condition (i) holds. To compute the
+	 * value of this variable, we not only use the return value of
+	 * the function bfq_symmetric_scenario(), but also check
+	 * whether bfqq is being weight-raised, because
+	 * bfq_symmetric_scenario() does not take into account also
+	 * weight-raised queues (see comments on
+	 * bfq_weights_tree_add()).
+	 *
+	 * As a side note, it is worth considering that the above
+	 * device-idling countermeasures may however fail in the
+	 * following unlucky scenario: if idling is (correctly)
+	 * disabled in a time period during which all symmetry
+	 * sub-conditions hold, and hence the device is allowed to
+	 * enqueue many requests, but at some later point in time some
+	 * sub-condition stops to hold, then it may become impossible
+	 * to let requests be served in the desired order until all
+	 * the requests already queued in the device have been served.
+	 */
+	asymmetric_scenario = bfqq->wr_coeff > 1 ||
+		!bfq_symmetric_scenario(bfqd);
+
+	/*
+	 * Finally, there is a case where maximizing throughput is the
+	 * best choice even if it may cause unfairness toward
+	 * bfqq. Such a case is when bfqq became active in a burst of
+	 * queue activations. Queues that became active during a large
+	 * burst benefit only from throughput, as discussed in the
+	 * comments on bfq_handle_burst. Thus, if bfqq became active
+	 * in a burst and not idling the device maximizes throughput,
+	 * then the device must no be idled, because not idling the
+	 * device provides bfqq and all other queues in the burst with
+	 * maximum benefit. Combining this and the above case, we can
+	 * now establish when idling is actually needed to preserve
+	 * service guarantees.
+	 */
+	idling_needed_for_service_guarantees =
+		asymmetric_scenario && !bfq_bfqq_in_large_burst(bfqq);
+
+	/*
+	 * We have now all the components we need to compute the return
+	 * value of the function, which is true only if both the following
+	 * conditions hold:
+	 * 1) bfqq is sync, because idling make sense only for sync queues;
+	 * 2) idling either boosts the throughput (without issues), or
+	 *    is necessary to preserve service guarantees.
+	 */
+	bfq_log_bfqq(bfqd, bfqq, "may_idle: sync %d idling_boosts_thr %d",
+		     bfq_bfqq_sync(bfqq), idling_boosts_thr);
+
+	bfq_log_bfqq(bfqd, bfqq,
+		     "may_idle: wr_busy %d boosts %d IO-bound %d guar %d",
+		     bfqd->wr_busy_queues,
+		     idling_boosts_thr_without_issues,
+		     bfq_bfqq_IO_bound(bfqq),
+		     idling_needed_for_service_guarantees);
+
+	return bfq_bfqq_sync(bfqq) &&
+		(idling_boosts_thr_without_issues ||
+		 idling_needed_for_service_guarantees);
+}
+
+/*
+ * If the in-service queue is empty but the function bfq_bfqq_may_idle
+ * returns true, then:
+ * 1) the queue must remain in service and cannot be expired, and
+ * 2) the device must be idled to wait for the possible arrival of a new
+ *    request for the queue.
+ * See the comments on the function bfq_bfqq_may_idle for the reasons
+ * why performing device idling is the best choice to boost the throughput
+ * and preserve service guarantees when bfq_bfqq_may_idle itself
+ * returns true.
+ */
+static bool bfq_bfqq_must_idle(struct bfq_queue *bfqq)
+{
+	struct bfq_data *bfqd = bfqq->bfqd;
+
+	return RB_EMPTY_ROOT(&bfqq->sort_list) && bfqd->bfq_slice_idle != 0 &&
+	       bfq_bfqq_may_idle(bfqq);
+}
+
+/*
+ * Select a queue for service.  If we have a current queue in service,
+ * check whether to continue servicing it, or retrieve and set a new one.
+ */
+static struct bfq_queue *bfq_select_queue(struct bfq_data *bfqd)
+{
+	struct bfq_queue *bfqq;
+	struct request *next_rq;
+	enum bfqq_expiration reason = BFQ_BFQQ_BUDGET_TIMEOUT;
+
+	bfqq = bfqd->in_service_queue;
+	if (!bfqq)
+		goto new_queue;
+
+	bfq_log_bfqq(bfqd, bfqq, "select_queue: already in-service queue");
+
+	if (bfq_may_expire_for_budg_timeout(bfqq) &&
+	    !hrtimer_active(&bfqd->idle_slice_timer) &&
+	    !bfq_bfqq_must_idle(bfqq))
+		goto expire;
+
+	next_rq = bfqq->next_rq;
+	/*
+	 * If bfqq has requests queued and it has enough budget left to
+	 * serve them, keep the queue, otherwise expire it.
+	 */
+	if (next_rq) {
+		if (bfq_serv_to_charge(next_rq, bfqq) >
+			bfq_bfqq_budget_left(bfqq)) {
+			reason = BFQ_BFQQ_BUDGET_EXHAUSTED;
+			goto expire;
+		} else {
+			/*
+			 * The idle timer may be pending because we may
+			 * not disable disk idling even when a new request
+			 * arrives.
+			 */
+			if (bfq_bfqq_wait_request(bfqq)) {
+				BUG_ON(!hrtimer_active(&bfqd->idle_slice_timer));
+				/*
+				 * If we get here: 1) at least a new request
+				 * has arrived but we have not disabled the
+				 * timer because the request was too small,
+				 * 2) then the block layer has unplugged
+				 * the device, causing the dispatch to be
+				 * invoked.
+				 *
+				 * Since the device is unplugged, now the
+				 * requests are probably large enough to
+				 * provide a reasonable throughput.
+				 * So we disable idling.
+				 */
+				bfq_clear_bfqq_wait_request(bfqq);
+				hrtimer_try_to_cancel(&bfqd->idle_slice_timer);
+				bfqg_stats_update_idle_time(bfqq_group(bfqq));
+			}
+			goto keep_queue;
+		}
+	}
+
+	/*
+	 * No requests pending. However, if the in-service queue is idling
+	 * for a new request, or has requests waiting for a completion and
+	 * may idle after their completion, then keep it anyway.
+	 */
+	if (hrtimer_active(&bfqd->idle_slice_timer) ||
+	    (bfqq->dispatched != 0 && bfq_bfqq_may_idle(bfqq))) {
+		bfqq = NULL;
+		goto keep_queue;
+	}
+
+	reason = BFQ_BFQQ_NO_MORE_REQUESTS;
+expire:
+	bfq_bfqq_expire(bfqd, bfqq, false, reason);
+new_queue:
+	bfqq = bfq_set_in_service_queue(bfqd);
+	bfq_log(bfqd, "select_queue: new queue %d returned",
+		bfqq ? bfqq->pid : 0);
+keep_queue:
+	return bfqq;
+}
+
+static void bfq_update_wr_data(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+
+	if (bfqq->wr_coeff > 1) { /* queue is being weight-raised */
+		BUG_ON(bfqq->wr_cur_max_time == bfqd->bfq_wr_rt_max_time &&
+		       time_is_after_jiffies(bfqq->last_wr_start_finish));
+
+		bfq_log_bfqq(bfqd, bfqq,
+			"raising period dur %u/%u msec, old coeff %u, w %d(%d)",
+			jiffies_to_msecs(jiffies - bfqq->last_wr_start_finish),
+			jiffies_to_msecs(bfqq->wr_cur_max_time),
+			bfqq->wr_coeff,
+			bfqq->entity.weight, bfqq->entity.orig_weight);
+
+		BUG_ON(bfqq != bfqd->in_service_queue && entity->weight !=
+		       entity->orig_weight * bfqq->wr_coeff);
+		if (entity->prio_changed)
+			bfq_log_bfqq(bfqd, bfqq, "WARN: pending prio change");
+
+		/*
+		 * If the queue was activated in a burst, or too much
+		 * time has elapsed from the beginning of this
+		 * weight-raising period, then end weight raising.
+		 */
+		if (bfq_bfqq_in_large_burst(bfqq))
+			bfq_bfqq_end_wr(bfqq);
+		else if (time_is_before_jiffies(bfqq->last_wr_start_finish +
+					   bfqq->wr_cur_max_time)) {
+			if (bfqq->wr_cur_max_time != bfqd->bfq_wr_rt_max_time ||
+			time_is_before_jiffies(bfqq->wr_start_at_switch_to_srt +
+					bfq_wr_duration(bfqd)))
+				bfq_bfqq_end_wr(bfqq);
+			else {
+				/* switch back to interactive wr */
+				bfqq->wr_coeff = bfqd->bfq_wr_coeff;
+				bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
+				bfqq->last_wr_start_finish =
+					bfqq->wr_start_at_switch_to_srt;
+				BUG_ON(time_is_after_jiffies(
+					       bfqq->last_wr_start_finish));
+				bfqq->entity.prio_changed = 1;
+				bfq_log_bfqq(bfqd, bfqq,
+					"back to interactive wr");
+			}
+		}
+	}
+	/* Update weight both if it must be raised and if it must be lowered */
+	if ((entity->weight > entity->orig_weight) != (bfqq->wr_coeff > 1))
+		__bfq_entity_update_weight_prio(
+			bfq_entity_service_tree(entity),
+			entity);
+}
+
+/*
+ * Dispatch one request from bfqq, moving it to the request queue
+ * dispatch list.
+ */
+static int bfq_dispatch_request(struct bfq_data *bfqd,
+				struct bfq_queue *bfqq)
+{
+	int dispatched = 0;
+	struct request *rq;
+	unsigned long service_to_charge;
+
+	BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list));
+
+	/* Follow expired path, else get first next available. */
+	rq = bfq_check_fifo(bfqq);
+	if (!rq)
+		rq = bfqq->next_rq;
+	service_to_charge = bfq_serv_to_charge(rq, bfqq);
+
+	if (service_to_charge > bfq_bfqq_budget_left(bfqq)) {
+		/*
+		 * This may happen if the next rq is chosen in fifo order
+		 * instead of sector order. The budget is properly
+		 * dimensioned to be always sufficient to serve the next
+		 * request only if it is chosen in sector order. The reason
+		 * is that it would be quite inefficient and little useful
+		 * to always make sure that the budget is large enough to
+		 * serve even the possible next rq in fifo order.
+		 * In fact, requests are seldom served in fifo order.
+		 *
+		 * Expire the queue for budget exhaustion, and make sure
+		 * that the next act_budget is enough to serve the next
+		 * request, even if it comes from the fifo expired path.
+		 */
+		bfqq->next_rq = rq;
+		/*
+		 * Since this dispatch is failed, make sure that
+		 * a new one will be performed
+		 */
+		if (!bfqd->rq_in_driver)
+			bfq_schedule_dispatch(bfqd);
+		BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+		goto expire;
+	}
+
+	BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+	/* Finally, insert request into driver dispatch list. */
+	bfq_bfqq_served(bfqq, service_to_charge);
+
+	BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+
+	bfq_dispatch_insert(bfqd->queue, rq);
+
+	/*
+	 * If weight raising has to terminate for bfqq, then next
+	 * function causes an immediate update of bfqq's weight,
+	 * without waiting for next activation. As a consequence, on
+	 * expiration, bfqq will be timestamped as if has never been
+	 * weight-raised during this service slot, even if it has
+	 * received part or even most of the service as a
+	 * weight-raised queue. This inflates bfqq's timestamps, which
+	 * is beneficial, as bfqq is then more willing to leave the
+	 * device immediately to possible other weight-raised queues.
+	 */
+	bfq_update_wr_data(bfqd, bfqq);
+
+	bfq_log_bfqq(bfqd, bfqq,
+			"dispatched %u sec req (%llu), budg left %d",
+			blk_rq_sectors(rq),
+			(unsigned long long) blk_rq_pos(rq),
+			bfq_bfqq_budget_left(bfqq));
+
+	dispatched++;
+
+	if (!bfqd->in_service_bic) {
+		atomic_long_inc(&RQ_BIC(rq)->icq.ioc->refcount);
+		bfqd->in_service_bic = RQ_BIC(rq);
+	}
+
+	if (bfqd->busy_queues > 1 && bfq_class_idle(bfqq))
+		goto expire;
+
+	return dispatched;
+
+expire:
+	bfq_bfqq_expire(bfqd, bfqq, false, BFQ_BFQQ_BUDGET_EXHAUSTED);
+	return dispatched;
+}
+
+static int __bfq_forced_dispatch_bfqq(struct bfq_queue *bfqq)
+{
+	int dispatched = 0;
+
+	while (bfqq->next_rq) {
+		bfq_dispatch_insert(bfqq->bfqd->queue, bfqq->next_rq);
+		dispatched++;
+	}
+
+	BUG_ON(!list_empty(&bfqq->fifo));
+	return dispatched;
+}
+
+/*
+ * Drain our current requests.
+ * Used for barriers and when switching io schedulers on-the-fly.
+ */
+static int bfq_forced_dispatch(struct bfq_data *bfqd)
+{
+	struct bfq_queue *bfqq, *n;
+	struct bfq_service_tree *st;
+	int dispatched = 0;
+
+	bfqq = bfqd->in_service_queue;
+	if (bfqq)
+		__bfq_bfqq_expire(bfqd, bfqq);
+
+	/*
+	 * Loop through classes, and be careful to leave the scheduler
+	 * in a consistent state, as feedback mechanisms and vtime
+	 * updates cannot be disabled during the process.
+	 */
+	list_for_each_entry_safe(bfqq, n, &bfqd->active_list, bfqq_list) {
+		st = bfq_entity_service_tree(&bfqq->entity);
+
+		dispatched += __bfq_forced_dispatch_bfqq(bfqq);
+
+		bfqq->max_budget = bfq_max_budget(bfqd);
+		bfq_forget_idle(st);
+	}
+
+	BUG_ON(bfqd->busy_queues != 0);
+
+	return dispatched;
+}
+
+static int bfq_dispatch_requests(struct request_queue *q, int force)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+	struct bfq_queue *bfqq;
+
+	bfq_log(bfqd, "dispatch requests: %d busy queues", bfqd->busy_queues);
+
+	if (bfqd->busy_queues == 0)
+		return 0;
+
+	if (unlikely(force))
+		return bfq_forced_dispatch(bfqd);
+
+	/*
+	 * Force device to serve one request at a time if
+	 * strict_guarantees is true. Forcing this service scheme is
+	 * currently the ONLY way to guarantee that the request
+	 * service order enforced by the scheduler is respected by a
+	 * queueing device. Otherwise the device is free even to make
+	 * some unlucky request wait for as long as the device
+	 * wishes.
+	 *
+	 * Of course, serving one request at at time may cause loss of
+	 * throughput.
+	 */
+	if (bfqd->strict_guarantees && bfqd->rq_in_driver > 0)
+		return 0;
+
+	bfqq = bfq_select_queue(bfqd);
+	if (!bfqq)
+		return 0;
+
+	BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+
+	BUG_ON(bfq_bfqq_wait_request(bfqq));
+
+	if (!bfq_dispatch_request(bfqd, bfqq))
+		return 0;
+
+	bfq_log_bfqq(bfqd, bfqq, "dispatched %s request",
+			bfq_bfqq_sync(bfqq) ? "sync" : "async");
+
+	BUG_ON(bfqq->next_rq == NULL &&
+	       bfqq->entity.budget < bfqq->entity.service);
+	return 1;
+}
+
+/*
+ * Task holds one reference to the queue, dropped when task exits.  Each rq
+ * in-flight on this queue also holds a reference, dropped when rq is freed.
+ *
+ * Queue lock must be held here.
+ */
+static void bfq_put_queue(struct bfq_queue *bfqq)
+{
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	struct bfq_group *bfqg = bfqq_group(bfqq);
+#endif
+
+	BUG_ON(bfqq->ref <= 0);
+
+	bfq_log_bfqq(bfqq->bfqd, bfqq, "put_queue: %p %d", bfqq, bfqq->ref);
+	bfqq->ref--;
+	if (bfqq->ref)
+		return;
+
+	BUG_ON(rb_first(&bfqq->sort_list));
+	BUG_ON(bfqq->allocated[READ] + bfqq->allocated[WRITE] != 0);
+	BUG_ON(bfqq->entity.tree);
+	BUG_ON(bfq_bfqq_busy(bfqq));
+
+	if (bfq_bfqq_sync(bfqq))
+		/*
+		 * The fact that this queue is being destroyed does not
+		 * invalidate the fact that this queue may have been
+		 * activated during the current burst. As a consequence,
+		 * although the queue does not exist anymore, and hence
+		 * needs to be removed from the burst list if there,
+		 * the burst size has not to be decremented.
+		 */
+		hlist_del_init(&bfqq->burst_list_node);
+
+	bfq_log_bfqq(bfqq->bfqd, bfqq, "put_queue: %p freed", bfqq);
+
+	kmem_cache_free(bfq_pool, bfqq);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	bfqg_put(bfqg);
+#endif
+}
+
+static void bfq_put_cooperator(struct bfq_queue *bfqq)
+{
+	struct bfq_queue *__bfqq, *next;
+
+	/*
+	 * If this queue was scheduled to merge with another queue, be
+	 * sure to drop the reference taken on that queue (and others in
+	 * the merge chain). See bfq_setup_merge and bfq_merge_bfqqs.
+	 */
+	__bfqq = bfqq->new_bfqq;
+	while (__bfqq) {
+		if (__bfqq == bfqq)
+			break;
+		next = __bfqq->new_bfqq;
+		bfq_put_queue(__bfqq);
+		__bfqq = next;
+	}
+}
+
+static void bfq_exit_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	if (bfqq == bfqd->in_service_queue) {
+		__bfq_bfqq_expire(bfqd, bfqq);
+		bfq_schedule_dispatch(bfqd);
+	}
+
+	bfq_log_bfqq(bfqd, bfqq, "exit_bfqq: %p, %d", bfqq, bfqq->ref);
+
+	bfq_put_cooperator(bfqq);
+
+	bfq_put_queue(bfqq);
+}
+
+static void bfq_init_icq(struct io_cq *icq)
+{
+	icq_to_bic(icq)->ttime.last_end_request = ktime_get_ns() - (1ULL<<32);
+}
+
+static void bfq_exit_icq(struct io_cq *icq)
+{
+	struct bfq_io_cq *bic = icq_to_bic(icq);
+	struct bfq_data *bfqd = bic_to_bfqd(bic);
+
+	if (bic_to_bfqq(bic, false)) {
+		bfq_exit_bfqq(bfqd, bic_to_bfqq(bic, false));
+		bic_set_bfqq(bic, NULL, false);
+	}
+
+	if (bic_to_bfqq(bic, true)) {
+		/*
+		 * If the bic is using a shared queue, put the reference
+		 * taken on the io_context when the bic started using a
+		 * shared bfq_queue.
+		 */
+		if (bfq_bfqq_coop(bic_to_bfqq(bic, true)))
+			put_io_context(icq->ioc);
+		bfq_exit_bfqq(bfqd, bic_to_bfqq(bic, true));
+		bic_set_bfqq(bic, NULL, true);
+	}
+}
+
+/*
+ * Update the entity prio values; note that the new values will not
+ * be used until the next (re)activation.
+ */
+static void bfq_set_next_ioprio_data(struct bfq_queue *bfqq,
+				     struct bfq_io_cq *bic)
+{
+	struct task_struct *tsk = current;
+	int ioprio_class;
+
+	ioprio_class = IOPRIO_PRIO_CLASS(bic->ioprio);
+	switch (ioprio_class) {
+	default:
+		dev_err(bfqq->bfqd->queue->backing_dev_info.dev,
+			"bfq: bad prio class %d\n", ioprio_class);
+	case IOPRIO_CLASS_NONE:
+		/*
+		 * No prio set, inherit CPU scheduling settings.
+		 */
+		bfqq->new_ioprio = task_nice_ioprio(tsk);
+		bfqq->new_ioprio_class = task_nice_ioclass(tsk);
+		break;
+	case IOPRIO_CLASS_RT:
+		bfqq->new_ioprio = IOPRIO_PRIO_DATA(bic->ioprio);
+		bfqq->new_ioprio_class = IOPRIO_CLASS_RT;
+		break;
+	case IOPRIO_CLASS_BE:
+		bfqq->new_ioprio = IOPRIO_PRIO_DATA(bic->ioprio);
+		bfqq->new_ioprio_class = IOPRIO_CLASS_BE;
+		break;
+	case IOPRIO_CLASS_IDLE:
+		bfqq->new_ioprio_class = IOPRIO_CLASS_IDLE;
+		bfqq->new_ioprio = 7;
+		bfq_clear_bfqq_idle_window(bfqq);
+		break;
+	}
+
+	if (bfqq->new_ioprio >= IOPRIO_BE_NR) {
+		pr_crit("bfq_set_next_ioprio_data: new_ioprio %d\n",
+			bfqq->new_ioprio);
+		BUG();
+	}
+
+	bfqq->entity.new_weight = bfq_ioprio_to_weight(bfqq->new_ioprio);
+	bfqq->entity.prio_changed = 1;
+	bfq_log_bfqq(bfqq->bfqd, bfqq,
+		     "set_next_ioprio_data: bic_class %d prio %d class %d",
+		     ioprio_class, bfqq->new_ioprio, bfqq->new_ioprio_class);
+}
+
+static void bfq_check_ioprio_change(struct bfq_io_cq *bic, struct bio *bio)
+{
+	struct bfq_data *bfqd = bic_to_bfqd(bic);
+	struct bfq_queue *bfqq;
+	unsigned long uninitialized_var(flags);
+	int ioprio = bic->icq.ioc->ioprio;
+
+	/*
+	 * This condition may trigger on a newly created bic, be sure to
+	 * drop the lock before returning.
+	 */
+	if (unlikely(!bfqd) || likely(bic->ioprio == ioprio))
+		return;
+
+	bic->ioprio = ioprio;
+
+	bfqq = bic_to_bfqq(bic, false);
+	if (bfqq) {
+		bfq_put_queue(bfqq);
+		bfqq = bfq_get_queue(bfqd, bio, BLK_RW_ASYNC, bic);
+		bic_set_bfqq(bic, bfqq, false);
+		bfq_log_bfqq(bfqd, bfqq,
+			     "check_ioprio_change: bfqq %p %d",
+			     bfqq, bfqq->ref);
+	}
+
+	bfqq = bic_to_bfqq(bic, true);
+	if (bfqq)
+		bfq_set_next_ioprio_data(bfqq, bic);
+}
+
+static void bfq_init_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+			  struct bfq_io_cq *bic, pid_t pid, int is_sync)
+{
+	RB_CLEAR_NODE(&bfqq->entity.rb_node);
+	INIT_LIST_HEAD(&bfqq->fifo);
+	INIT_HLIST_NODE(&bfqq->burst_list_node);
+	BUG_ON(!hlist_unhashed(&bfqq->burst_list_node));
+
+	bfqq->ref = 0;
+	bfqq->bfqd = bfqd;
+
+	if (bic)
+		bfq_set_next_ioprio_data(bfqq, bic);
+
+	if (is_sync) {
+		if (!bfq_class_idle(bfqq))
+			bfq_mark_bfqq_idle_window(bfqq);
+		bfq_mark_bfqq_sync(bfqq);
+		bfq_mark_bfqq_just_created(bfqq);
+	} else
+		bfq_clear_bfqq_sync(bfqq);
+	bfq_mark_bfqq_IO_bound(bfqq);
+
+	/* Tentative initial value to trade off between thr and lat */
+	bfqq->max_budget = (2 * bfq_max_budget(bfqd)) / 3;
+	bfqq->pid = pid;
+
+	bfqq->wr_coeff = 1;
+	bfqq->last_wr_start_finish = jiffies;
+	bfqq->wr_start_at_switch_to_srt = bfq_smallest_from_now();
+	bfqq->budget_timeout = bfq_smallest_from_now();
+	bfqq->split_time = bfq_smallest_from_now();
+
+	/*
+	 * Set to the value for which bfqq will not be deemed as
+	 * soft rt when it becomes backlogged.
+	 */
+	bfqq->soft_rt_next_start = bfq_greatest_from_now();
+
+	/* first request is almost certainly seeky */
+	bfqq->seek_history = 1;
+}
+
+static struct bfq_queue **bfq_async_queue_prio(struct bfq_data *bfqd,
+					       struct bfq_group *bfqg,
+					       int ioprio_class, int ioprio)
+{
+	switch (ioprio_class) {
+	case IOPRIO_CLASS_RT:
+		return &bfqg->async_bfqq[0][ioprio];
+	case IOPRIO_CLASS_NONE:
+		ioprio = IOPRIO_NORM;
+		/* fall through */
+	case IOPRIO_CLASS_BE:
+		return &bfqg->async_bfqq[1][ioprio];
+	case IOPRIO_CLASS_IDLE:
+		return &bfqg->async_idle_bfqq;
+	default:
+		BUG();
+	}
+}
+
+static struct bfq_queue *bfq_get_queue(struct bfq_data *bfqd,
+				       struct bio *bio, bool is_sync,
+				       struct bfq_io_cq *bic)
+{
+	const int ioprio = IOPRIO_PRIO_DATA(bic->ioprio);
+	const int ioprio_class = IOPRIO_PRIO_CLASS(bic->ioprio);
+	struct bfq_queue **async_bfqq = NULL;
+	struct bfq_queue *bfqq;
+	struct bfq_group *bfqg;
+
+	rcu_read_lock();
+
+	bfqg = bfq_find_set_group(bfqd, bio_blkcg(bio));
+	if (!bfqg) {
+		bfqq = &bfqd->oom_bfqq;
+		goto out;
+	}
+
+	if (!is_sync) {
+		async_bfqq = bfq_async_queue_prio(bfqd, bfqg, ioprio_class,
+						  ioprio);
+		bfqq = *async_bfqq;
+		if (bfqq)
+			goto out;
+	}
+
+	bfqq = kmem_cache_alloc_node(bfq_pool,
+				     GFP_NOWAIT | __GFP_ZERO | __GFP_NOWARN,
+				     bfqd->queue->node);
+
+	if (bfqq) {
+		bfq_init_bfqq(bfqd, bfqq, bic, current->pid,
+			      is_sync);
+		bfq_init_entity(&bfqq->entity, bfqg);
+		bfq_log_bfqq(bfqd, bfqq, "allocated");
+	} else {
+		bfqq = &bfqd->oom_bfqq;
+		bfq_log_bfqq(bfqd, bfqq, "using oom bfqq");
+		goto out;
+	}
+
+	/*
+	 * Pin the queue now that it's allocated, scheduler exit will
+	 * prune it.
+	 */
+	if (async_bfqq) {
+		bfqq->ref++;
+		bfq_log_bfqq(bfqd, bfqq, "get_queue, bfqq not in async: %p, %d",
+			     bfqq, bfqq->ref);
+		*async_bfqq = bfqq;
+	}
+
+out:
+	bfqq->ref++;
+	bfq_log_bfqq(bfqd, bfqq, "get_queue, at end: %p, %d", bfqq, bfqq->ref);
+	rcu_read_unlock();
+	return bfqq;
+}
+
+static void bfq_update_io_thinktime(struct bfq_data *bfqd,
+				    struct bfq_io_cq *bic)
+{
+	struct bfq_ttime *ttime = &bic->ttime;
+	u64 elapsed = ktime_get_ns() - bic->ttime.last_end_request;
+
+	elapsed = min_t(u64, elapsed, 2 * bfqd->bfq_slice_idle);
+
+	ttime->ttime_samples = (7*bic->ttime.ttime_samples + 256) / 8;
+	ttime->ttime_total = div_u64(7*ttime->ttime_total + 256*elapsed,  8);
+	ttime->ttime_mean = div64_ul(ttime->ttime_total + 128,
+				     ttime->ttime_samples);
+}
+
+static void
+bfq_update_io_seektime(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+		       struct request *rq)
+{
+	bfqq->seek_history <<= 1;
+	bfqq->seek_history |=
+		get_sdist(bfqq->last_request_pos, rq) > BFQQ_SEEK_THR &&
+		(!blk_queue_nonrot(bfqd->queue) ||
+		 blk_rq_sectors(rq) < BFQQ_SECT_THR_NONROT);
+}
+
+/*
+ * Disable idle window if the process thinks too long or seeks so much that
+ * it doesn't matter.
+ */
+static void bfq_update_idle_window(struct bfq_data *bfqd,
+				   struct bfq_queue *bfqq,
+				   struct bfq_io_cq *bic)
+{
+	int enable_idle;
+
+	/* Don't idle for async or idle io prio class. */
+	if (!bfq_bfqq_sync(bfqq) || bfq_class_idle(bfqq))
+		return;
+
+	/* Idle window just restored, statistics are meaningless. */
+	if (time_is_after_eq_jiffies(bfqq->split_time +
+				     bfqd->bfq_wr_min_idle_time))
+		return;
+
+	enable_idle = bfq_bfqq_idle_window(bfqq);
+
+	if (atomic_read(&bic->icq.ioc->active_ref) == 0 ||
+	    bfqd->bfq_slice_idle == 0 ||
+		(bfqd->hw_tag && BFQQ_SEEKY(bfqq) &&
+			bfqq->wr_coeff == 1))
+		enable_idle = 0;
+	else if (bfq_sample_valid(bic->ttime.ttime_samples)) {
+		if (bic->ttime.ttime_mean > bfqd->bfq_slice_idle &&
+			bfqq->wr_coeff == 1)
+			enable_idle = 0;
+		else
+			enable_idle = 1;
+	}
+	bfq_log_bfqq(bfqd, bfqq, "update_idle_window: enable_idle %d",
+		enable_idle);
+
+	if (enable_idle)
+		bfq_mark_bfqq_idle_window(bfqq);
+	else
+		bfq_clear_bfqq_idle_window(bfqq);
+}
+
+/*
+ * Called when a new fs request (rq) is added to bfqq.  Check if there's
+ * something we should do about it.
+ */
+static void bfq_rq_enqueued(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+			    struct request *rq)
+{
+	struct bfq_io_cq *bic = RQ_BIC(rq);
+
+	if (rq->cmd_flags & REQ_META)
+		bfqq->meta_pending++;
+
+	bfq_update_io_thinktime(bfqd, bic);
+	bfq_update_io_seektime(bfqd, bfqq, rq);
+	if (bfqq->entity.service > bfq_max_budget(bfqd) / 8 ||
+	    !BFQQ_SEEKY(bfqq))
+		bfq_update_idle_window(bfqd, bfqq, bic);
+
+	bfq_log_bfqq(bfqd, bfqq,
+		     "rq_enqueued: idle_window=%d (seeky %d)",
+		     bfq_bfqq_idle_window(bfqq), BFQQ_SEEKY(bfqq));
+
+	bfqq->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
+
+	if (bfqq == bfqd->in_service_queue && bfq_bfqq_wait_request(bfqq)) {
+		bool small_req = bfqq->queued[rq_is_sync(rq)] == 1 &&
+				 blk_rq_sectors(rq) < 32;
+		bool budget_timeout = bfq_bfqq_budget_timeout(bfqq);
+
+		/*
+		 * There is just this request queued: if the request
+		 * is small and the queue is not to be expired, then
+		 * just exit.
+		 *
+		 * In this way, if the device is being idled to wait
+		 * for a new request from the in-service queue, we
+		 * avoid unplugging the device and committing the
+		 * device to serve just a small request. On the
+		 * contrary, we wait for the block layer to decide
+		 * when to unplug the device: hopefully, new requests
+		 * will be merged to this one quickly, then the device
+		 * will be unplugged and larger requests will be
+		 * dispatched.
+		 */
+		if (small_req && !budget_timeout)
+			return;
+
+		/*
+		 * A large enough request arrived, or the queue is to
+		 * be expired: in both cases disk idling is to be
+		 * stopped, so clear wait_request flag and reset
+		 * timer.
+		 */
+		bfq_clear_bfqq_wait_request(bfqq);
+		hrtimer_try_to_cancel(&bfqd->idle_slice_timer);
+		bfqg_stats_update_idle_time(bfqq_group(bfqq));
+
+		/*
+		 * The queue is not empty, because a new request just
+		 * arrived. Hence we can safely expire the queue, in
+		 * case of budget timeout, without risking that the
+		 * timestamps of the queue are not updated correctly.
+		 * See [1] for more details.
+		 */
+		if (budget_timeout)
+			bfq_bfqq_expire(bfqd, bfqq, false,
+					BFQ_BFQQ_BUDGET_TIMEOUT);
+
+		/*
+		 * Let the request rip immediately, or let a new queue be
+		 * selected if bfqq has just been expired.
+		 */
+		__blk_run_queue(bfqd->queue);
+	}
+}
+
+static void bfq_insert_request(struct request_queue *q, struct request *rq)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+	struct bfq_queue *bfqq = RQ_BFQQ(rq), *new_bfqq;
+
+	assert_spin_locked(bfqd->queue->queue_lock);
+
+	/*
+	 * An unplug may trigger a requeue of a request from the device
+	 * driver: make sure we are in process context while trying to
+	 * merge two bfq_queues.
+	 */
+	if (!in_interrupt()) {
+		new_bfqq = bfq_setup_cooperator(bfqd, bfqq, rq, true);
+		if (new_bfqq) {
+			if (bic_to_bfqq(RQ_BIC(rq), 1) != bfqq)
+				new_bfqq = bic_to_bfqq(RQ_BIC(rq), 1);
+			/*
+			 * Release the request's reference to the old bfqq
+			 * and make sure one is taken to the shared queue.
+			 */
+			new_bfqq->allocated[rq_data_dir(rq)]++;
+			bfqq->allocated[rq_data_dir(rq)]--;
+			new_bfqq->ref++;
+			bfq_clear_bfqq_just_created(bfqq);
+			bfq_put_queue(bfqq);
+			if (bic_to_bfqq(RQ_BIC(rq), 1) == bfqq)
+				bfq_merge_bfqqs(bfqd, RQ_BIC(rq),
+						bfqq, new_bfqq);
+			rq->elv.priv[1] = new_bfqq;
+			bfqq = new_bfqq;
+		}
+	}
+
+	bfq_add_request(rq);
+
+	rq->fifo_time = ktime_get_ns() + bfqd->bfq_fifo_expire[rq_is_sync(rq)];
+	list_add_tail(&rq->queuelist, &bfqq->fifo);
+
+	bfq_rq_enqueued(bfqd, bfqq, rq);
+}
+
+static void bfq_update_hw_tag(struct bfq_data *bfqd)
+{
+	bfqd->max_rq_in_driver = max_t(int, bfqd->max_rq_in_driver,
+				       bfqd->rq_in_driver);
+
+	if (bfqd->hw_tag == 1)
+		return;
+
+	/*
+	 * This sample is valid if the number of outstanding requests
+	 * is large enough to allow a queueing behavior.  Note that the
+	 * sum is not exact, as it's not taking into account deactivated
+	 * requests.
+	 */
+	if (bfqd->rq_in_driver + bfqd->queued < BFQ_HW_QUEUE_THRESHOLD)
+		return;
+
+	if (bfqd->hw_tag_samples++ < BFQ_HW_QUEUE_SAMPLES)
+		return;
+
+	bfqd->hw_tag = bfqd->max_rq_in_driver > BFQ_HW_QUEUE_THRESHOLD;
+	bfqd->max_rq_in_driver = 0;
+	bfqd->hw_tag_samples = 0;
+}
+
+static void bfq_completed_request(struct request_queue *q, struct request *rq)
+{
+	struct bfq_queue *bfqq = RQ_BFQQ(rq);
+	struct bfq_data *bfqd = bfqq->bfqd;
+	u64 now_ns;
+	u32 delta_us;
+
+	bfq_log_bfqq(bfqd, bfqq, "completed one req with %u sects left",
+		     blk_rq_sectors(rq));
+
+	assert_spin_locked(bfqd->queue->queue_lock);
+	bfq_update_hw_tag(bfqd);
+
+	BUG_ON(!bfqd->rq_in_driver);
+	BUG_ON(!bfqq->dispatched);
+	bfqd->rq_in_driver--;
+	bfqq->dispatched--;
+	bfqg_stats_update_completion(bfqq_group(bfqq),
+				     rq_start_time_ns(rq),
+				     rq_io_start_time_ns(rq),
+				     rq->cmd_flags);
+
+	if (!bfqq->dispatched && !bfq_bfqq_busy(bfqq)) {
+		BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list));
+		/*
+		 * Set budget_timeout (which we overload to store the
+		 * time at which the queue remains with no backlog and
+		 * no outstanding request; used by the weight-raising
+		 * mechanism).
+		 */
+		bfqq->budget_timeout = jiffies;
+
+		bfq_weights_tree_remove(bfqd, &bfqq->entity,
+					&bfqd->queue_weights_tree);
+	}
+
+	now_ns = ktime_get_ns();
+
+	RQ_BIC(rq)->ttime.last_end_request = now_ns;
+
+	/*
+	 * Using us instead of ns, to get a reasonable precision in
+	 * computing rate in next check.
+	 */
+	delta_us = div_u64(now_ns - bfqd->last_completion, NSEC_PER_USEC);
+
+	bfq_log(bfqd, "rq_completed: delta %uus/%luus max_size %u rate %llu/%llu",
+		delta_us, BFQ_MIN_TT/NSEC_PER_USEC, bfqd->last_rq_max_size,
+		(USEC_PER_SEC*
+		(u64)((bfqd->last_rq_max_size<<BFQ_RATE_SHIFT)/delta_us))
+			>>BFQ_RATE_SHIFT,
+		(USEC_PER_SEC*(u64)(1UL<<(BFQ_RATE_SHIFT-10)))>>BFQ_RATE_SHIFT);
+
+	/*
+	 * If the request took rather long to complete, and, according
+	 * to the maximum request size recorded, this completion latency
+	 * implies that the request was certainly served at a very low
+	 * rate (less than 1M sectors/sec), then the whole observation
+	 * interval that lasts up to this time instant cannot be a
+	 * valid time interval for computing a new peak rate.  Invoke
+	 * bfq_update_rate_reset to have the following three steps
+	 * taken:
+	 * - close the observation interval at the last (previous)
+	 *   request dispatch or completion
+	 * - compute rate, if possible, for that observation interval
+	 * - reset to zero samples, which will trigger a proper
+	 *   re-initialization of the observation interval on next
+	 *   dispatch
+	 */
+	if (delta_us > BFQ_MIN_TT/NSEC_PER_USEC &&
+	   (bfqd->last_rq_max_size<<BFQ_RATE_SHIFT)/delta_us <
+			1UL<<(BFQ_RATE_SHIFT - 10))
+		bfq_update_rate_reset(bfqd, NULL);
+	bfqd->last_completion = now_ns;
+
+	/*
+	 * If we are waiting to discover whether the request pattern
+	 * of the task associated with the queue is actually
+	 * isochronous, and both requisites for this condition to hold
+	 * are now satisfied, then compute soft_rt_next_start (see the
+	 * comments on the function bfq_bfqq_softrt_next_start()). We
+	 * schedule this delayed check when bfqq expires, if it still
+	 * has in-flight requests.
+	 */
+	if (bfq_bfqq_softrt_update(bfqq) && bfqq->dispatched == 0 &&
+	    RB_EMPTY_ROOT(&bfqq->sort_list))
+		bfqq->soft_rt_next_start =
+			bfq_bfqq_softrt_next_start(bfqd, bfqq);
+
+	/*
+	 * If this is the in-service queue, check if it needs to be expired,
+	 * or if we want to idle in case it has no pending requests.
+	 */
+	if (bfqd->in_service_queue == bfqq) {
+		if (bfqq->dispatched == 0 && bfq_bfqq_must_idle(bfqq)) {
+			bfq_arm_slice_timer(bfqd);
+			goto out;
+		} else if (bfq_may_expire_for_budg_timeout(bfqq))
+			bfq_bfqq_expire(bfqd, bfqq, false,
+					BFQ_BFQQ_BUDGET_TIMEOUT);
+		else if (RB_EMPTY_ROOT(&bfqq->sort_list) &&
+			 (bfqq->dispatched == 0 ||
+			  !bfq_bfqq_may_idle(bfqq)))
+			bfq_bfqq_expire(bfqd, bfqq, false,
+					BFQ_BFQQ_NO_MORE_REQUESTS);
+	}
+
+	if (!bfqd->rq_in_driver)
+		bfq_schedule_dispatch(bfqd);
+
+out:
+	return;
+}
+
+static int __bfq_may_queue(struct bfq_queue *bfqq)
+{
+	if (bfq_bfqq_wait_request(bfqq) && bfq_bfqq_must_alloc(bfqq)) {
+		bfq_clear_bfqq_must_alloc(bfqq);
+		return ELV_MQUEUE_MUST;
+	}
+
+	return ELV_MQUEUE_MAY;
+}
+
+static int bfq_may_queue(struct request_queue *q, unsigned int op)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+	struct task_struct *tsk = current;
+	struct bfq_io_cq *bic;
+	struct bfq_queue *bfqq;
+
+	/*
+	 * Don't force setup of a queue from here, as a call to may_queue
+	 * does not necessarily imply that a request actually will be
+	 * queued. So just lookup a possibly existing queue, or return
+	 * 'may queue' if that fails.
+	 */
+	bic = bfq_bic_lookup(bfqd, tsk->io_context);
+	if (!bic)
+		return ELV_MQUEUE_MAY;
+
+	bfqq = bic_to_bfqq(bic, op_is_sync(op));
+	if (bfqq)
+		return __bfq_may_queue(bfqq);
+
+	return ELV_MQUEUE_MAY;
+}
+
+/*
+ * Queue lock held here.
+ */
+static void bfq_put_request(struct request *rq)
+{
+	struct bfq_queue *bfqq = RQ_BFQQ(rq);
+
+	if (bfqq) {
+		const int rw = rq_data_dir(rq);
+
+		BUG_ON(!bfqq->allocated[rw]);
+		bfqq->allocated[rw]--;
+
+		rq->elv.priv[0] = NULL;
+		rq->elv.priv[1] = NULL;
+
+		bfq_log_bfqq(bfqq->bfqd, bfqq, "put_request %p, %d",
+			     bfqq, bfqq->ref);
+		bfq_put_queue(bfqq);
+	}
+}
+
+/*
+ * Returns NULL if a new bfqq should be allocated, or the old bfqq if this
+ * was the last process referring to that bfqq.
+ */
+static struct bfq_queue *
+bfq_split_bfqq(struct bfq_io_cq *bic, struct bfq_queue *bfqq)
+{
+	bfq_log_bfqq(bfqq->bfqd, bfqq, "splitting queue");
+
+	put_io_context(bic->icq.ioc);
+
+	if (bfqq_process_refs(bfqq) == 1) {
+		bfqq->pid = current->pid;
+		bfq_clear_bfqq_coop(bfqq);
+		bfq_clear_bfqq_split_coop(bfqq);
+		return bfqq;
+	}
+
+	bic_set_bfqq(bic, NULL, 1);
+
+	bfq_put_cooperator(bfqq);
+
+	bfq_put_queue(bfqq);
+	return NULL;
+}
+
+/*
+ * Allocate bfq data structures associated with this request.
+ */
+static int bfq_set_request(struct request_queue *q, struct request *rq,
+			   struct bio *bio, gfp_t gfp_mask)
+{
+	struct bfq_data *bfqd = q->elevator->elevator_data;
+	struct bfq_io_cq *bic = icq_to_bic(rq->elv.icq);
+	const int rw = rq_data_dir(rq);
+	const int is_sync = rq_is_sync(rq);
+	struct bfq_queue *bfqq;
+	unsigned long flags;
+	bool split = false;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	bfq_check_ioprio_change(bic, bio);
+
+	if (!bic)
+		goto queue_fail;
+
+	bfq_bic_update_cgroup(bic, bio);
+
+new_queue:
+	bfqq = bic_to_bfqq(bic, is_sync);
+	if (!bfqq || bfqq == &bfqd->oom_bfqq) {
+		if (bfqq)
+			bfq_put_queue(bfqq);
+		bfqq = bfq_get_queue(bfqd, bio, is_sync, bic);
+		BUG_ON(!hlist_unhashed(&bfqq->burst_list_node));
+
+		bic_set_bfqq(bic, bfqq, is_sync);
+		if (split && is_sync) {
+			bfq_log_bfqq(bfqd, bfqq,
+				     "set_request: was_in_list %d "
+				     "was_in_large_burst %d "
+				     "large burst in progress %d",
+				     bic->was_in_burst_list,
+				     bic->saved_in_large_burst,
+				     bfqd->large_burst);
+
+			if ((bic->was_in_burst_list && bfqd->large_burst) ||
+			    bic->saved_in_large_burst) {
+				bfq_log_bfqq(bfqd, bfqq,
+					     "set_request: marking in "
+					     "large burst");
+				bfq_mark_bfqq_in_large_burst(bfqq);
+			} else {
+				bfq_log_bfqq(bfqd, bfqq,
+					     "set_request: clearing in "
+					     "large burst");
+				bfq_clear_bfqq_in_large_burst(bfqq);
+				if (bic->was_in_burst_list)
+					hlist_add_head(&bfqq->burst_list_node,
+						       &bfqd->burst_list);
+			}
+			bfqq->split_time = jiffies;
+		}
+	} else {
+		/* If the queue was seeky for too long, break it apart. */
+		if (bfq_bfqq_coop(bfqq) && bfq_bfqq_split_coop(bfqq)) {
+			bfq_log_bfqq(bfqd, bfqq, "breaking apart bfqq");
+
+			/* Update bic before losing reference to bfqq */
+			if (bfq_bfqq_in_large_burst(bfqq))
+				bic->saved_in_large_burst = true;
+
+			bfqq = bfq_split_bfqq(bic, bfqq);
+			split = true;
+			if (!bfqq)
+				goto new_queue;
+		}
+	}
+
+	bfqq->allocated[rw]++;
+	bfqq->ref++;
+	bfq_log_bfqq(bfqd, bfqq, "set_request: bfqq %p, %d", bfqq, bfqq->ref);
+
+	rq->elv.priv[0] = bic;
+	rq->elv.priv[1] = bfqq;
+
+	/*
+	 * If a bfq_queue has only one process reference, it is owned
+	 * by only one bfq_io_cq: we can set the bic field of the
+	 * bfq_queue to the address of that structure. Also, if the
+	 * queue has just been split, mark a flag so that the
+	 * information is available to the other scheduler hooks.
+	 */
+	if (likely(bfqq != &bfqd->oom_bfqq) && bfqq_process_refs(bfqq) == 1) {
+		bfqq->bic = bic;
+		if (split) {
+			/*
+			 * If the queue has just been split from a shared
+			 * queue, restore the idle window and the possible
+			 * weight raising period.
+			 */
+			bfq_bfqq_resume_state(bfqq, bic);
+		}
+	}
+
+	if (unlikely(bfq_bfqq_just_created(bfqq)))
+		bfq_handle_burst(bfqd, bfqq);
+
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	return 0;
+
+queue_fail:
+	bfq_schedule_dispatch(bfqd);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	return 1;
+}
+
+static void bfq_kick_queue(struct work_struct *work)
+{
+	struct bfq_data *bfqd =
+		container_of(work, struct bfq_data, unplug_work);
+	struct request_queue *q = bfqd->queue;
+
+	spin_lock_irq(q->queue_lock);
+	__blk_run_queue(q);
+	spin_unlock_irq(q->queue_lock);
+}
+
+/*
+ * Handler of the expiration of the timer running if the in-service queue
+ * is idling inside its time slice.
+ */
+static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
+{
+	struct bfq_data *bfqd = container_of(timer, struct bfq_data,
+					     idle_slice_timer);
+	struct bfq_queue *bfqq;
+	unsigned long flags;
+	enum bfqq_expiration reason;
+
+	spin_lock_irqsave(bfqd->queue->queue_lock, flags);
+
+	bfqq = bfqd->in_service_queue;
+	/*
+	 * Theoretical race here: the in-service queue can be NULL or
+	 * different from the queue that was idling if the timer handler
+	 * spins on the queue_lock and a new request arrives for the
+	 * current queue and there is a full dispatch cycle that changes
+	 * the in-service queue.  This can hardly happen, but in the worst
+	 * case we just expire a queue too early.
+	 */
+	if (bfqq) {
+		bfq_log_bfqq(bfqd, bfqq, "slice_timer expired");
+		bfq_clear_bfqq_wait_request(bfqq);
+
+		if (bfq_bfqq_budget_timeout(bfqq))
+			/*
+			 * Also here the queue can be safely expired
+			 * for budget timeout without wasting
+			 * guarantees
+			 */
+			reason = BFQ_BFQQ_BUDGET_TIMEOUT;
+		else if (bfqq->queued[0] == 0 && bfqq->queued[1] == 0)
+			/*
+			 * The queue may not be empty upon timer expiration,
+			 * because we may not disable the timer when the
+			 * first request of the in-service queue arrives
+			 * during disk idling.
+			 */
+			reason = BFQ_BFQQ_TOO_IDLE;
+		else
+			goto schedule_dispatch;
+
+		bfq_bfqq_expire(bfqd, bfqq, true, reason);
+	}
+
+schedule_dispatch:
+	bfq_schedule_dispatch(bfqd);
+
+	spin_unlock_irqrestore(bfqd->queue->queue_lock, flags);
+	return HRTIMER_NORESTART;
+}
+
+static void bfq_shutdown_timer_wq(struct bfq_data *bfqd)
+{
+	hrtimer_cancel(&bfqd->idle_slice_timer);
+	cancel_work_sync(&bfqd->unplug_work);
+}
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static void __bfq_put_async_bfqq(struct bfq_data *bfqd,
+					struct bfq_queue **bfqq_ptr)
+{
+	struct bfq_group *root_group = bfqd->root_group;
+	struct bfq_queue *bfqq = *bfqq_ptr;
+
+	bfq_log(bfqd, "put_async_bfqq: %p", bfqq);
+	if (bfqq) {
+		bfq_bfqq_move(bfqd, bfqq, root_group);
+		bfq_log_bfqq(bfqd, bfqq, "put_async_bfqq: putting %p, %d",
+			     bfqq, bfqq->ref);
+		bfq_put_queue(bfqq);
+		*bfqq_ptr = NULL;
+	}
+}
+
+/*
+ * Release all the bfqg references to its async queues.  If we are
+ * deallocating the group these queues may still contain requests, so
+ * we reparent them to the root cgroup (i.e., the only one that will
+ * exist for sure until all the requests on a device are gone).
+ */
+static void bfq_put_async_queues(struct bfq_data *bfqd, struct bfq_group *bfqg)
+{
+	int i, j;
+
+	for (i = 0; i < 2; i++)
+		for (j = 0; j < IOPRIO_BE_NR; j++)
+			__bfq_put_async_bfqq(bfqd, &bfqg->async_bfqq[i][j]);
+
+	__bfq_put_async_bfqq(bfqd, &bfqg->async_idle_bfqq);
+}
+#endif
+
+static void bfq_exit_queue(struct elevator_queue *e)
+{
+	struct bfq_data *bfqd = e->elevator_data;
+	struct request_queue *q = bfqd->queue;
+	struct bfq_queue *bfqq, *n;
+
+	bfq_shutdown_timer_wq(bfqd);
+
+	spin_lock_irq(q->queue_lock);
+
+	BUG_ON(bfqd->in_service_queue);
+	list_for_each_entry_safe(bfqq, n, &bfqd->idle_list, bfqq_list)
+		bfq_deactivate_bfqq(bfqd, bfqq, false, false);
+
+	spin_unlock_irq(q->queue_lock);
+
+	bfq_shutdown_timer_wq(bfqd);
+
+	BUG_ON(hrtimer_active(&bfqd->idle_slice_timer));
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	blkcg_deactivate_policy(q, &blkcg_policy_bfq);
+#else
+	kfree(bfqd->root_group);
+#endif
+
+	kfree(bfqd);
+}
+
+static void bfq_init_root_group(struct bfq_group *root_group,
+				struct bfq_data *bfqd)
+{
+	int i;
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	root_group->entity.parent = NULL;
+	root_group->my_entity = NULL;
+	root_group->bfqd = bfqd;
+#endif
+	root_group->rq_pos_tree = RB_ROOT;
+	for (i = 0; i < BFQ_IOPRIO_CLASSES; i++)
+		root_group->sched_data.service_tree[i] = BFQ_SERVICE_TREE_INIT;
+	root_group->sched_data.bfq_class_idle_last_service = jiffies;
+}
+
+static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
+{
+	struct bfq_data *bfqd;
+	struct elevator_queue *eq;
+
+	eq = elevator_alloc(q, e);
+	if (!eq)
+		return -ENOMEM;
+
+	bfqd = kzalloc_node(sizeof(*bfqd), GFP_KERNEL, q->node);
+	if (!bfqd) {
+		kobject_put(&eq->kobj);
+		return -ENOMEM;
+	}
+	eq->elevator_data = bfqd;
+
+	/*
+	 * Our fallback bfqq if bfq_find_alloc_queue() runs into OOM issues.
+	 * Grab a permanent reference to it, so that the normal code flow
+	 * will not attempt to free it.
+	 */
+	bfq_init_bfqq(bfqd, &bfqd->oom_bfqq, NULL, 1, 0);
+	bfqd->oom_bfqq.ref++;
+	bfqd->oom_bfqq.new_ioprio = BFQ_DEFAULT_QUEUE_IOPRIO;
+	bfqd->oom_bfqq.new_ioprio_class = IOPRIO_CLASS_BE;
+	bfqd->oom_bfqq.entity.new_weight =
+		bfq_ioprio_to_weight(bfqd->oom_bfqq.new_ioprio);
+
+	/* oom_bfqq does not participate to bursts */
+	bfq_clear_bfqq_just_created(&bfqd->oom_bfqq);
+	/*
+	 * Trigger weight initialization, according to ioprio, at the
+	 * oom_bfqq's first activation. The oom_bfqq's ioprio and ioprio
+	 * class won't be changed any more.
+	 */
+	bfqd->oom_bfqq.entity.prio_changed = 1;
+
+	bfqd->queue = q;
+
+	spin_lock_irq(q->queue_lock);
+	q->elevator = eq;
+	spin_unlock_irq(q->queue_lock);
+
+	bfqd->root_group = bfq_create_group_hierarchy(bfqd, q->node);
+	if (!bfqd->root_group)
+		goto out_free;
+	bfq_init_root_group(bfqd->root_group, bfqd);
+	bfq_init_entity(&bfqd->oom_bfqq.entity, bfqd->root_group);
+
+	hrtimer_init(&bfqd->idle_slice_timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_REL);
+	bfqd->idle_slice_timer.function = bfq_idle_slice_timer;
+
+	bfqd->queue_weights_tree = RB_ROOT;
+	bfqd->group_weights_tree = RB_ROOT;
+
+	INIT_WORK(&bfqd->unplug_work, bfq_kick_queue);
+
+	INIT_LIST_HEAD(&bfqd->active_list);
+	INIT_LIST_HEAD(&bfqd->idle_list);
+	INIT_HLIST_HEAD(&bfqd->burst_list);
+
+	bfqd->hw_tag = -1;
+
+	bfqd->bfq_max_budget = bfq_default_max_budget;
+
+	bfqd->bfq_fifo_expire[0] = bfq_fifo_expire[0];
+	bfqd->bfq_fifo_expire[1] = bfq_fifo_expire[1];
+	bfqd->bfq_back_max = bfq_back_max;
+	bfqd->bfq_back_penalty = bfq_back_penalty;
+	bfqd->bfq_slice_idle = bfq_slice_idle;
+	bfqd->bfq_timeout = bfq_timeout;
+
+	bfqd->bfq_requests_within_timer = 120;
+
+	bfqd->bfq_large_burst_thresh = 8;
+	bfqd->bfq_burst_interval = msecs_to_jiffies(180);
+
+	bfqd->low_latency = true;
+
+	/*
+	 * Trade-off between responsiveness and fairness.
+	 */
+	bfqd->bfq_wr_coeff = 30;
+	bfqd->bfq_wr_rt_max_time = msecs_to_jiffies(300);
+	bfqd->bfq_wr_max_time = 0;
+	bfqd->bfq_wr_min_idle_time = msecs_to_jiffies(2000);
+	bfqd->bfq_wr_min_inter_arr_async = msecs_to_jiffies(500);
+	bfqd->bfq_wr_max_softrt_rate = 7000; /*
+					      * Approximate rate required
+					      * to playback or record a
+					      * high-definition compressed
+					      * video.
+					      */
+	bfqd->wr_busy_queues = 0;
+
+	/*
+	 * Begin by assuming, optimistically, that the device is a
+	 * high-speed one, and that its peak rate is equal to 2/3 of
+	 * the highest reference rate.
+	 */
+	bfqd->RT_prod = R_fast[blk_queue_nonrot(bfqd->queue)] *
+			T_fast[blk_queue_nonrot(bfqd->queue)];
+	bfqd->peak_rate = R_fast[blk_queue_nonrot(bfqd->queue)] * 2 / 3;
+	bfqd->device_speed = BFQ_BFQD_FAST;
+
+	return 0;
+
+out_free:
+	kfree(bfqd);
+	kobject_put(&eq->kobj);
+	return -ENOMEM;
+}
+
+static void bfq_slab_kill(void)
+{
+	kmem_cache_destroy(bfq_pool);
+}
+
+static int __init bfq_slab_setup(void)
+{
+	bfq_pool = KMEM_CACHE(bfq_queue, 0);
+	if (!bfq_pool)
+		return -ENOMEM;
+	return 0;
+}
+
+static ssize_t bfq_var_show(unsigned int var, char *page)
+{
+	return sprintf(page, "%u\n", var);
+}
+
+static ssize_t bfq_var_store(unsigned long *var, const char *page,
+			     size_t count)
+{
+	unsigned long new_val;
+	int ret = kstrtoul(page, 10, &new_val);
+
+	if (ret == 0)
+		*var = new_val;
+
+	return count;
+}
+
+static ssize_t bfq_wr_max_time_show(struct elevator_queue *e, char *page)
+{
+	struct bfq_data *bfqd = e->elevator_data;
+
+	return sprintf(page, "%d\n", bfqd->bfq_wr_max_time > 0 ?
+		       jiffies_to_msecs(bfqd->bfq_wr_max_time) :
+		       jiffies_to_msecs(bfq_wr_duration(bfqd)));
+}
+
+static ssize_t bfq_weights_show(struct elevator_queue *e, char *page)
+{
+	struct bfq_queue *bfqq;
+	struct bfq_data *bfqd = e->elevator_data;
+	ssize_t num_char = 0;
+
+	num_char += sprintf(page + num_char, "Tot reqs queued %d\n\n",
+			    bfqd->queued);
+
+	spin_lock_irq(bfqd->queue->queue_lock);
+
+	num_char += sprintf(page + num_char, "Active:\n");
+	list_for_each_entry(bfqq, &bfqd->active_list, bfqq_list) {
+		num_char += sprintf(page + num_char,
+				    "pid%d: weight %hu, nr_queued %d %d, ",
+				    bfqq->pid,
+				    bfqq->entity.weight,
+				    bfqq->queued[0],
+				    bfqq->queued[1]);
+		num_char += sprintf(page + num_char,
+				    "dur %d/%u\n",
+				    jiffies_to_msecs(
+					    jiffies -
+					    bfqq->last_wr_start_finish),
+				    jiffies_to_msecs(bfqq->wr_cur_max_time));
+	}
+
+	num_char += sprintf(page + num_char, "Idle:\n");
+	list_for_each_entry(bfqq, &bfqd->idle_list, bfqq_list) {
+		num_char += sprintf(page + num_char,
+				    "pid%d: weight %hu, dur %d/%u\n",
+				    bfqq->pid,
+				    bfqq->entity.weight,
+				    jiffies_to_msecs(jiffies -
+						     bfqq->last_wr_start_finish),
+				    jiffies_to_msecs(bfqq->wr_cur_max_time));
+	}
+
+	spin_unlock_irq(bfqd->queue->queue_lock);
+
+	return num_char;
+}
+
+#define SHOW_FUNCTION(__FUNC, __VAR, __CONV)				\
+static ssize_t __FUNC(struct elevator_queue *e, char *page)		\
+{									\
+	struct bfq_data *bfqd = e->elevator_data;			\
+	u64 __data = __VAR;						\
+	if (__CONV == 1)						\
+		__data = jiffies_to_msecs(__data);			\
+	else if (__CONV == 2)						\
+		__data = div_u64(__data, NSEC_PER_MSEC);		\
+	return bfq_var_show(__data, (page));				\
+}
+SHOW_FUNCTION(bfq_fifo_expire_sync_show, bfqd->bfq_fifo_expire[1], 2);
+SHOW_FUNCTION(bfq_fifo_expire_async_show, bfqd->bfq_fifo_expire[0], 2);
+SHOW_FUNCTION(bfq_back_seek_max_show, bfqd->bfq_back_max, 0);
+SHOW_FUNCTION(bfq_back_seek_penalty_show, bfqd->bfq_back_penalty, 0);
+SHOW_FUNCTION(bfq_slice_idle_show, bfqd->bfq_slice_idle, 2);
+SHOW_FUNCTION(bfq_max_budget_show, bfqd->bfq_user_max_budget, 0);
+SHOW_FUNCTION(bfq_timeout_sync_show, bfqd->bfq_timeout, 1);
+SHOW_FUNCTION(bfq_strict_guarantees_show, bfqd->strict_guarantees, 0);
+SHOW_FUNCTION(bfq_low_latency_show, bfqd->low_latency, 0);
+SHOW_FUNCTION(bfq_wr_coeff_show, bfqd->bfq_wr_coeff, 0);
+SHOW_FUNCTION(bfq_wr_rt_max_time_show, bfqd->bfq_wr_rt_max_time, 1);
+SHOW_FUNCTION(bfq_wr_min_idle_time_show, bfqd->bfq_wr_min_idle_time, 1);
+SHOW_FUNCTION(bfq_wr_min_inter_arr_async_show, bfqd->bfq_wr_min_inter_arr_async,
+	1);
+SHOW_FUNCTION(bfq_wr_max_softrt_rate_show, bfqd->bfq_wr_max_softrt_rate, 0);
+#undef SHOW_FUNCTION
+
+#define USEC_SHOW_FUNCTION(__FUNC, __VAR)				\
+static ssize_t __FUNC(struct elevator_queue *e, char *page)		\
+{									\
+	struct bfq_data *bfqd = e->elevator_data;			\
+	u64 __data = __VAR;						\
+	__data = div_u64(__data, NSEC_PER_USEC);			\
+	return bfq_var_show(__data, (page));				\
+}
+USEC_SHOW_FUNCTION(bfq_slice_idle_us_show, bfqd->bfq_slice_idle);
+#undef USEC_SHOW_FUNCTION
+
+#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV)			\
+static ssize_t								\
+__FUNC(struct elevator_queue *e, const char *page, size_t count)	\
+{									\
+	struct bfq_data *bfqd = e->elevator_data;			\
+	unsigned long uninitialized_var(__data);			\
+	int ret = bfq_var_store(&__data, (page), count);		\
+	if (__data < (MIN))						\
+		__data = (MIN);						\
+	else if (__data > (MAX))					\
+		__data = (MAX);						\
+	if (__CONV == 1)						\
+		*(__PTR) = msecs_to_jiffies(__data);			\
+	else if (__CONV == 2)						\
+		*(__PTR) = (u64)__data * NSEC_PER_MSEC;			\
+	else								\
+		*(__PTR) = __data;					\
+	return ret;							\
+}
+STORE_FUNCTION(bfq_fifo_expire_sync_store, &bfqd->bfq_fifo_expire[1], 1,
+		INT_MAX, 2);
+STORE_FUNCTION(bfq_fifo_expire_async_store, &bfqd->bfq_fifo_expire[0], 1,
+		INT_MAX, 2);
+STORE_FUNCTION(bfq_back_seek_max_store, &bfqd->bfq_back_max, 0, INT_MAX, 0);
+STORE_FUNCTION(bfq_back_seek_penalty_store, &bfqd->bfq_back_penalty, 1,
+		INT_MAX, 0);
+STORE_FUNCTION(bfq_slice_idle_store, &bfqd->bfq_slice_idle, 0, INT_MAX, 2);
+STORE_FUNCTION(bfq_wr_coeff_store, &bfqd->bfq_wr_coeff, 1, INT_MAX, 0);
+STORE_FUNCTION(bfq_wr_max_time_store, &bfqd->bfq_wr_max_time, 0, INT_MAX, 1);
+STORE_FUNCTION(bfq_wr_rt_max_time_store, &bfqd->bfq_wr_rt_max_time, 0, INT_MAX,
+		1);
+STORE_FUNCTION(bfq_wr_min_idle_time_store, &bfqd->bfq_wr_min_idle_time, 0,
+		INT_MAX, 1);
+STORE_FUNCTION(bfq_wr_min_inter_arr_async_store,
+		&bfqd->bfq_wr_min_inter_arr_async, 0, INT_MAX, 1);
+STORE_FUNCTION(bfq_wr_max_softrt_rate_store, &bfqd->bfq_wr_max_softrt_rate, 0,
+		INT_MAX, 0);
+#undef STORE_FUNCTION
+
+#define USEC_STORE_FUNCTION(__FUNC, __PTR, MIN, MAX)			\
+static ssize_t __FUNC(struct elevator_queue *e, const char *page, size_t count)\
+{									\
+	struct bfq_data *bfqd = e->elevator_data;			\
+	unsigned long uninitialized_var(__data);			\
+	int ret = bfq_var_store(&__data, (page), count);		\
+	if (__data < (MIN))						\
+		__data = (MIN);						\
+	else if (__data > (MAX))					\
+		__data = (MAX);						\
+	*(__PTR) = (u64)__data * NSEC_PER_USEC;				\
+	return ret;							\
+}
+USEC_STORE_FUNCTION(bfq_slice_idle_us_store, &bfqd->bfq_slice_idle, 0,
+		    UINT_MAX);
+#undef USEC_STORE_FUNCTION
+
+/* do nothing for the moment */
+static ssize_t bfq_weights_store(struct elevator_queue *e,
+				    const char *page, size_t count)
+{
+	return count;
+}
+
+static ssize_t bfq_max_budget_store(struct elevator_queue *e,
+				    const char *page, size_t count)
+{
+	struct bfq_data *bfqd = e->elevator_data;
+	unsigned long uninitialized_var(__data);
+	int ret = bfq_var_store(&__data, (page), count);
+
+	if (__data == 0)
+		bfqd->bfq_max_budget = bfq_calc_max_budget(bfqd);
+	else {
+		if (__data > INT_MAX)
+			__data = INT_MAX;
+		bfqd->bfq_max_budget = __data;
+	}
+
+	bfqd->bfq_user_max_budget = __data;
+
+	return ret;
+}
+
+/*
+ * Leaving this name to preserve name compatibility with cfq
+ * parameters, but this timeout is used for both sync and async.
+ */
+static ssize_t bfq_timeout_sync_store(struct elevator_queue *e,
+				      const char *page, size_t count)
+{
+	struct bfq_data *bfqd = e->elevator_data;
+	unsigned long uninitialized_var(__data);
+	int ret = bfq_var_store(&__data, (page), count);
+
+	if (__data < 1)
+		__data = 1;
+	else if (__data > INT_MAX)
+		__data = INT_MAX;
+
+	bfqd->bfq_timeout = msecs_to_jiffies(__data);
+	if (bfqd->bfq_user_max_budget == 0)
+		bfqd->bfq_max_budget = bfq_calc_max_budget(bfqd);
+
+	return ret;
+}
+
+static ssize_t bfq_strict_guarantees_store(struct elevator_queue *e,
+				     const char *page, size_t count)
+{
+	struct bfq_data *bfqd = e->elevator_data;
+	unsigned long uninitialized_var(__data);
+	int ret = bfq_var_store(&__data, (page), count);
+
+	if (__data > 1)
+		__data = 1;
+	if (!bfqd->strict_guarantees && __data == 1
+	    && bfqd->bfq_slice_idle < 8 * NSEC_PER_MSEC)
+		bfqd->bfq_slice_idle = 8 * NSEC_PER_MSEC;
+
+	bfqd->strict_guarantees = __data;
+
+	return ret;
+}
+
+static ssize_t bfq_low_latency_store(struct elevator_queue *e,
+				     const char *page, size_t count)
+{
+	struct bfq_data *bfqd = e->elevator_data;
+	unsigned long uninitialized_var(__data);
+	int ret = bfq_var_store(&__data, (page), count);
+
+	if (__data > 1)
+		__data = 1;
+	if (__data == 0 && bfqd->low_latency != 0)
+		bfq_end_wr(bfqd);
+	bfqd->low_latency = __data;
+
+	return ret;
+}
+
+#define BFQ_ATTR(name) \
+	__ATTR(name, S_IRUGO|S_IWUSR, bfq_##name##_show, bfq_##name##_store)
+
+static struct elv_fs_entry bfq_attrs[] = {
+	BFQ_ATTR(fifo_expire_sync),
+	BFQ_ATTR(fifo_expire_async),
+	BFQ_ATTR(back_seek_max),
+	BFQ_ATTR(back_seek_penalty),
+	BFQ_ATTR(slice_idle),
+	BFQ_ATTR(slice_idle_us),
+	BFQ_ATTR(max_budget),
+	BFQ_ATTR(timeout_sync),
+	BFQ_ATTR(strict_guarantees),
+	BFQ_ATTR(low_latency),
+	BFQ_ATTR(wr_coeff),
+	BFQ_ATTR(wr_max_time),
+	BFQ_ATTR(wr_rt_max_time),
+	BFQ_ATTR(wr_min_idle_time),
+	BFQ_ATTR(wr_min_inter_arr_async),
+	BFQ_ATTR(wr_max_softrt_rate),
+	BFQ_ATTR(weights),
+	__ATTR_NULL
+};
+
+static struct elevator_type iosched_bfq = {
+	.ops = {
+		.elevator_merge_fn =		bfq_merge,
+		.elevator_merged_fn =		bfq_merged_request,
+		.elevator_merge_req_fn =	bfq_merged_requests,
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		.elevator_bio_merged_fn =	bfq_bio_merged,
+#endif
+		.elevator_allow_bio_merge_fn =	bfq_allow_bio_merge,
+		.elevator_allow_rq_merge_fn =	bfq_allow_rq_merge,
+		.elevator_dispatch_fn =		bfq_dispatch_requests,
+		.elevator_add_req_fn =		bfq_insert_request,
+		.elevator_activate_req_fn =	bfq_activate_request,
+		.elevator_deactivate_req_fn =	bfq_deactivate_request,
+		.elevator_completed_req_fn =	bfq_completed_request,
+		.elevator_former_req_fn =	elv_rb_former_request,
+		.elevator_latter_req_fn =	elv_rb_latter_request,
+		.elevator_init_icq_fn =		bfq_init_icq,
+		.elevator_exit_icq_fn =		bfq_exit_icq,
+		.elevator_set_req_fn =		bfq_set_request,
+		.elevator_put_req_fn =		bfq_put_request,
+		.elevator_may_queue_fn =	bfq_may_queue,
+		.elevator_init_fn =		bfq_init_queue,
+		.elevator_exit_fn =		bfq_exit_queue,
+	},
+	.icq_size =		sizeof(struct bfq_io_cq),
+	.icq_align =		__alignof__(struct bfq_io_cq),
+	.elevator_attrs =	bfq_attrs,
+	.elevator_name =	"bfq",
+	.elevator_owner =	THIS_MODULE,
+};
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static struct blkcg_policy blkcg_policy_bfq = {
+	.dfl_cftypes		= bfq_blkg_files,
+	.legacy_cftypes		= bfq_blkcg_legacy_files,
+
+	.cpd_alloc_fn		= bfq_cpd_alloc,
+	.cpd_init_fn		= bfq_cpd_init,
+	.cpd_bind_fn	        = bfq_cpd_init,
+	.cpd_free_fn		= bfq_cpd_free,
+
+	.pd_alloc_fn		= bfq_pd_alloc,
+	.pd_init_fn		= bfq_pd_init,
+	.pd_offline_fn		= bfq_pd_offline,
+	.pd_free_fn		= bfq_pd_free,
+	.pd_reset_stats_fn	= bfq_pd_reset_stats,
+};
+#endif
+
+static int __init bfq_init(void)
+{
+	int ret;
+	char msg[60] = "BFQ I/O-scheduler: v8r7";
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	ret = blkcg_policy_register(&blkcg_policy_bfq);
+	if (ret)
+		return ret;
+#endif
+
+	ret = -ENOMEM;
+	if (bfq_slab_setup())
+		goto err_pol_unreg;
+
+	/*
+	 * Times to load large popular applications for the typical
+	 * systems installed on the reference devices (see the
+	 * comments before the definitions of the next two
+	 * arrays). Actually, we use slightly slower values, as the
+	 * estimated peak rate tends to be smaller than the actual
+	 * peak rate.  The reason for this last fact is that estimates
+	 * are computed over much shorter time intervals than the long
+	 * intervals typically used for benchmarking. Why? First, to
+	 * adapt more quickly to variations. Second, because an I/O
+	 * scheduler cannot rely on a peak-rate-evaluation workload to
+	 * be run for a long time.
+	 */
+	T_slow[0] = msecs_to_jiffies(3500); /* actually 4 sec */
+	T_slow[1] = msecs_to_jiffies(1000); /* actually 1.5 sec */
+	T_fast[0] = msecs_to_jiffies(7000); /* actually 8 sec */
+	T_fast[1] = msecs_to_jiffies(2500); /* actually 3 sec */
+
+	/*
+	 * Thresholds that determine the switch between speed classes
+	 * (see the comments before the definition of the array
+	 * device_speed_thresh). These thresholds are biased towards
+	 * transitions to the fast class. This is safer than the
+	 * opposite bias. In fact, a wrong transition to the slow
+	 * class results in short weight-raising periods, because the
+	 * speed of the device then tends to be higher that the
+	 * reference peak rate. On the opposite end, a wrong
+	 * transition to the fast class tends to increase
+	 * weight-raising periods, because of the opposite reason.
+	 */
+	device_speed_thresh[0] = (4 * R_slow[0]) / 3;
+	device_speed_thresh[1] = (4 * R_slow[1]) / 3;
+
+	ret = elv_register(&iosched_bfq);
+	if (ret)
+		goto err_pol_unreg;
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	strcat(msg, " (with cgroups support)");
+#endif
+	pr_info("%s", msg);
+
+	return 0;
+
+err_pol_unreg:
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	blkcg_policy_unregister(&blkcg_policy_bfq);
+#endif
+	return ret;
+}
+
+static void __exit bfq_exit(void)
+{
+	elv_unregister(&iosched_bfq);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	blkcg_policy_unregister(&blkcg_policy_bfq);
+#endif
+	bfq_slab_kill();
+}
+
+module_init(bfq_init);
+module_exit(bfq_exit);
+
+MODULE_AUTHOR("Arianna Avanzini, Fabio Checconi, Paolo Valente");
+MODULE_LICENSE("GPL");
diff --git a/block/bfq-sched.c b/block/bfq-sched.c
new file mode 100644
index 000000000000..797bce75db01
--- /dev/null
+++ b/block/bfq-sched.c
@@ -0,0 +1,1933 @@
+/*
+ * BFQ: Hierarchical B-WF2Q+ scheduler.
+ *
+ * Based on ideas and code from CFQ:
+ * Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
+ *
+ * Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
+ *		      Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
+ */
+
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq);
+
+/**
+ * bfq_gt - compare two timestamps.
+ * @a: first ts.
+ * @b: second ts.
+ *
+ * Return @a > @b, dealing with wrapping correctly.
+ */
+static int bfq_gt(u64 a, u64 b)
+{
+	return (s64)(a - b) > 0;
+}
+
+static struct bfq_entity *bfq_root_active_entity(struct rb_root *tree)
+{
+	struct rb_node *node = tree->rb_node;
+
+	return rb_entry(node, struct bfq_entity, rb_node);
+}
+
+static struct bfq_entity *bfq_lookup_next_entity(struct bfq_sched_data *sd);
+
+static bool bfq_update_parent_budget(struct bfq_entity *next_in_service);
+
+/**
+ * bfq_update_next_in_service - update sd->next_in_service
+ * @sd: sched_data for which to perform the update.
+ * @new_entity: if not NULL, pointer to the entity whose activation,
+ *		requeueing or repositionig triggered the invocation of
+ *		this function.
+ *
+ * This function is called to update sd->next_in_service, which, in
+ * its turn, may change as a consequence of the insertion or
+ * extraction of an entity into/from one of the active trees of
+ * sd. These insertions/extractions occur as a consequence of
+ * activations/deactivations of entities, with some activations being
+ * 'true' activations, and other activations being requeueings (i.e.,
+ * implementing the second, requeueing phase of the mechanism used to
+ * reposition an entity in its active tree; see comments on
+ * __bfq_activate_entity and __bfq_requeue_entity for details). In
+ * both the last two activation sub-cases, new_entity points to the
+ * just activated or requeued entity.
+ *
+ * Returns true if sd->next_in_service changes in such a way that
+ * entity->parent may become the next_in_service for its parent
+ * entity.
+ */
+static bool bfq_update_next_in_service(struct bfq_sched_data *sd,
+				       struct bfq_entity *new_entity)
+{
+	struct bfq_entity *next_in_service = sd->next_in_service;
+	struct bfq_queue *bfqq;
+	bool parent_sched_may_change = false;
+
+	/*
+	 * If this update is triggered by the activation, requeueing
+	 * or repositiong of an entity that does not coincide with
+	 * sd->next_in_service, then a full lookup in the active tree
+	 * can be avoided. In fact, it is enough to check whether the
+	 * just-modified entity has a higher priority than
+	 * sd->next_in_service, or, even if it has the same priority
+	 * as sd->next_in_service, is eligible and has a lower virtual
+	 * finish time than sd->next_in_service. If this compound
+	 * condition holds, then the new entity becomes the new
+	 * next_in_service. Otherwise no change is needed.
+	 */
+	if (new_entity && new_entity != sd->next_in_service) {
+		/*
+		 * Flag used to decide whether to replace
+		 * sd->next_in_service with new_entity. Tentatively
+		 * set to true, and left as true if
+		 * sd->next_in_service is NULL.
+		 */
+		bool replace_next = true;
+
+		/*
+		 * If there is already a next_in_service candidate
+		 * entity, then compare class priorities or timestamps
+		 * to decide whether to replace sd->service_tree with
+		 * new_entity.
+		 */
+		if (next_in_service) {
+			unsigned int new_entity_class_idx =
+				bfq_class_idx(new_entity);
+			struct bfq_service_tree *st =
+				sd->service_tree + new_entity_class_idx;
+
+			/*
+			 * For efficiency, evaluate the most likely
+			 * sub-condition first.
+			 */
+			replace_next =
+				(new_entity_class_idx ==
+				 bfq_class_idx(next_in_service)
+				 &&
+				 !bfq_gt(new_entity->start, st->vtime)
+				 &&
+				 bfq_gt(next_in_service->finish,
+					new_entity->finish))
+				||
+				new_entity_class_idx <
+				bfq_class_idx(next_in_service);
+		}
+
+		if (replace_next)
+			next_in_service = new_entity;
+	} else /* invoked because of a deactivation: lookup needed */
+		next_in_service = bfq_lookup_next_entity(sd);
+
+	if (next_in_service) {
+		parent_sched_may_change = !sd->next_in_service ||
+			bfq_update_parent_budget(next_in_service);
+	}
+
+	sd->next_in_service = next_in_service;
+
+	if (!next_in_service)
+		return parent_sched_may_change;
+
+	bfqq = bfq_entity_to_bfqq(next_in_service);
+	if (bfqq)
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			     "update_next_in_service: chosen this queue");
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	else {
+		struct bfq_group *bfqg =
+			container_of(next_in_service,
+				     struct bfq_group, entity);
+
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			     "update_next_in_service: chosen this entity");
+	}
+#endif
+	return parent_sched_may_change;
+}
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+/* both next loops stop at one of the child entities of the root group */
+#define for_each_entity(entity)				\
+	for (; entity ; entity = entity->parent)
+
+#define for_each_entity_safe(entity, parent) \
+	for (; entity && ({ parent = entity->parent; 1; }); entity = parent)
+
+/*
+ * Returns true if this budget changes may let next_in_service->parent
+ * become the next_in_service entity for its parent entity.
+ */
+static bool bfq_update_parent_budget(struct bfq_entity *next_in_service)
+{
+	struct bfq_entity *bfqg_entity;
+	struct bfq_group *bfqg;
+	struct bfq_sched_data *group_sd;
+	bool ret = false;
+
+	BUG_ON(!next_in_service);
+
+	group_sd = next_in_service->sched_data;
+
+	bfqg = container_of(group_sd, struct bfq_group, sched_data);
+	/*
+	 * bfq_group's my_entity field is not NULL only if the group
+	 * is not the root group. We must not touch the root entity
+	 * as it must never become an in-service entity.
+	 */
+	bfqg_entity = bfqg->my_entity;
+	if (bfqg_entity) {
+		if (bfqg_entity->budget > next_in_service->budget)
+			ret = true;
+		bfqg_entity->budget = next_in_service->budget;
+	}
+
+	return ret;
+}
+
+/*
+ * This function tells whether entity stops being a candidate for next
+ * service, according to the following logic.
+ *
+ * This function is invoked for an entity that is about to be set in
+ * service. If such an entity is a queue, then the entity is no longer
+ * a candidate for next service (i.e, a candidate entity to serve
+ * after the in-service entity is expired). The function then returns
+ * true.
+ *
+ * In contrast, the entity could stil be a candidate for next service
+ * if it is not a queue, and has more than one child. In fact, even if
+ * one of its children is about to be set in service, other children
+ * may still be the next to serve. As a consequence, a non-queue
+ * entity is not a candidate for next-service only if it has only one
+ * child. And only if this condition holds, then the function returns
+ * true for a non-queue entity.
+ */
+static bool bfq_no_longer_next_in_service(struct bfq_entity *entity)
+{
+	struct bfq_group *bfqg;
+
+	if (bfq_entity_to_bfqq(entity))
+		return true;
+
+	bfqg = container_of(entity, struct bfq_group, entity);
+
+	BUG_ON(bfqg == ((struct bfq_data *)(bfqg->bfqd))->root_group);
+	BUG_ON(bfqg->active_entities == 0);
+	if (bfqg->active_entities == 1)
+		return true;
+
+	return false;
+}
+
+#else /* CONFIG_BFQ_GROUP_IOSCHED */
+#define for_each_entity(entity)	\
+	for (; entity ; entity = NULL)
+
+#define for_each_entity_safe(entity, parent) \
+	for (parent = NULL; entity ; entity = parent)
+
+static bool bfq_update_parent_budget(struct bfq_entity *next_in_service)
+{
+	return false;
+}
+
+static bool bfq_no_longer_next_in_service(struct bfq_entity *entity)
+{
+	return true;
+}
+
+#endif /* CONFIG_BFQ_GROUP_IOSCHED */
+
+/*
+ * Shift for timestamp calculations.  This actually limits the maximum
+ * service allowed in one timestamp delta (small shift values increase it),
+ * the maximum total weight that can be used for the queues in the system
+ * (big shift values increase it), and the period of virtual time
+ * wraparounds.
+ */
+#define WFQ_SERVICE_SHIFT	22
+
+static struct bfq_queue *bfq_entity_to_bfqq(struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = NULL;
+
+	BUG_ON(!entity);
+
+	if (!entity->my_sched_data)
+		bfqq = container_of(entity, struct bfq_queue, entity);
+
+	return bfqq;
+}
+
+
+/**
+ * bfq_delta - map service into the virtual time domain.
+ * @service: amount of service.
+ * @weight: scale factor (weight of an entity or weight sum).
+ */
+static u64 bfq_delta(unsigned long service, unsigned long weight)
+{
+	u64 d = (u64)service << WFQ_SERVICE_SHIFT;
+
+	do_div(d, weight);
+	return d;
+}
+
+/**
+ * bfq_calc_finish - assign the finish time to an entity.
+ * @entity: the entity to act upon.
+ * @service: the service to be charged to the entity.
+ */
+static void bfq_calc_finish(struct bfq_entity *entity, unsigned long service)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	unsigned long long start, finish, delta;
+
+	BUG_ON(entity->weight == 0);
+
+	entity->finish = entity->start +
+		bfq_delta(service, entity->weight);
+
+	start = ((entity->start>>10)*1000)>>12;
+	finish = ((entity->finish>>10)*1000)>>12;
+	delta = ((bfq_delta(service, entity->weight)>>10)*1000)>>12;
+
+	if (bfqq) {
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			"calc_finish: serv %lu, w %d",
+			service, entity->weight);
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			"calc_finish: start %llu, finish %llu, delta %llu",
+			start, finish, delta);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	} else {
+		struct bfq_group *bfqg =
+			container_of(entity, struct bfq_group, entity);
+
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			"calc_finish group: serv %lu, w %d",
+			     service, entity->weight);
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			"calc_finish group: start %llu, finish %llu, delta %llu",
+			start, finish, delta);
+#endif
+	}
+}
+
+/**
+ * bfq_entity_of - get an entity from a node.
+ * @node: the node field of the entity.
+ *
+ * Convert a node pointer to the relative entity.  This is used only
+ * to simplify the logic of some functions and not as the generic
+ * conversion mechanism because, e.g., in the tree walking functions,
+ * the check for a %NULL value would be redundant.
+ */
+static struct bfq_entity *bfq_entity_of(struct rb_node *node)
+{
+	struct bfq_entity *entity = NULL;
+
+	if (node)
+		entity = rb_entry(node, struct bfq_entity, rb_node);
+
+	return entity;
+}
+
+/**
+ * bfq_extract - remove an entity from a tree.
+ * @root: the tree root.
+ * @entity: the entity to remove.
+ */
+static void bfq_extract(struct rb_root *root, struct bfq_entity *entity)
+{
+	BUG_ON(entity->tree != root);
+
+	entity->tree = NULL;
+	rb_erase(&entity->rb_node, root);
+}
+
+/**
+ * bfq_idle_extract - extract an entity from the idle tree.
+ * @st: the service tree of the owning @entity.
+ * @entity: the entity being removed.
+ */
+static void bfq_idle_extract(struct bfq_service_tree *st,
+			     struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	struct rb_node *next;
+
+	BUG_ON(entity->tree != &st->idle);
+
+	if (entity == st->first_idle) {
+		next = rb_next(&entity->rb_node);
+		st->first_idle = bfq_entity_of(next);
+	}
+
+	if (entity == st->last_idle) {
+		next = rb_prev(&entity->rb_node);
+		st->last_idle = bfq_entity_of(next);
+	}
+
+	bfq_extract(&st->idle, entity);
+
+	if (bfqq)
+		list_del(&bfqq->bfqq_list);
+}
+
+/**
+ * bfq_insert - generic tree insertion.
+ * @root: tree root.
+ * @entity: entity to insert.
+ *
+ * This is used for the idle and the active tree, since they are both
+ * ordered by finish time.
+ */
+static void bfq_insert(struct rb_root *root, struct bfq_entity *entity)
+{
+	struct bfq_entity *entry;
+	struct rb_node **node = &root->rb_node;
+	struct rb_node *parent = NULL;
+
+	BUG_ON(entity->tree);
+
+	while (*node) {
+		parent = *node;
+		entry = rb_entry(parent, struct bfq_entity, rb_node);
+
+		if (bfq_gt(entry->finish, entity->finish))
+			node = &parent->rb_left;
+		else
+			node = &parent->rb_right;
+	}
+
+	rb_link_node(&entity->rb_node, parent, node);
+	rb_insert_color(&entity->rb_node, root);
+
+	entity->tree = root;
+}
+
+/**
+ * bfq_update_min - update the min_start field of a entity.
+ * @entity: the entity to update.
+ * @node: one of its children.
+ *
+ * This function is called when @entity may store an invalid value for
+ * min_start due to updates to the active tree.  The function  assumes
+ * that the subtree rooted at @node (which may be its left or its right
+ * child) has a valid min_start value.
+ */
+static void bfq_update_min(struct bfq_entity *entity, struct rb_node *node)
+{
+	struct bfq_entity *child;
+
+	if (node) {
+		child = rb_entry(node, struct bfq_entity, rb_node);
+		if (bfq_gt(entity->min_start, child->min_start))
+			entity->min_start = child->min_start;
+	}
+}
+
+/**
+ * bfq_update_active_node - recalculate min_start.
+ * @node: the node to update.
+ *
+ * @node may have changed position or one of its children may have moved,
+ * this function updates its min_start value.  The left and right subtrees
+ * are assumed to hold a correct min_start value.
+ */
+static void bfq_update_active_node(struct rb_node *node)
+{
+	struct bfq_entity *entity = rb_entry(node, struct bfq_entity, rb_node);
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+	entity->min_start = entity->start;
+	bfq_update_min(entity, node->rb_right);
+	bfq_update_min(entity, node->rb_left);
+
+	if (bfqq) {
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			     "update_active_node: new min_start %llu",
+			     ((entity->min_start>>10)*1000)>>12);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	} else {
+		struct bfq_group *bfqg =
+			container_of(entity, struct bfq_group, entity);
+
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			     "update_active_node: new min_start %llu",
+			     ((entity->min_start>>10)*1000)>>12);
+#endif
+	}
+}
+
+/**
+ * bfq_update_active_tree - update min_start for the whole active tree.
+ * @node: the starting node.
+ *
+ * @node must be the deepest modified node after an update.  This function
+ * updates its min_start using the values held by its children, assuming
+ * that they did not change, and then updates all the nodes that may have
+ * changed in the path to the root.  The only nodes that may have changed
+ * are the ones in the path or their siblings.
+ */
+static void bfq_update_active_tree(struct rb_node *node)
+{
+	struct rb_node *parent;
+
+up:
+	bfq_update_active_node(node);
+
+	parent = rb_parent(node);
+	if (!parent)
+		return;
+
+	if (node == parent->rb_left && parent->rb_right)
+		bfq_update_active_node(parent->rb_right);
+	else if (parent->rb_left)
+		bfq_update_active_node(parent->rb_left);
+
+	node = parent;
+	goto up;
+}
+
+static void bfq_weights_tree_add(struct bfq_data *bfqd,
+				 struct bfq_entity *entity,
+				 struct rb_root *root);
+
+static void bfq_weights_tree_remove(struct bfq_data *bfqd,
+				    struct bfq_entity *entity,
+				    struct rb_root *root);
+
+
+/**
+ * bfq_active_insert - insert an entity in the active tree of its
+ *                     group/device.
+ * @st: the service tree of the entity.
+ * @entity: the entity being inserted.
+ *
+ * The active tree is ordered by finish time, but an extra key is kept
+ * per each node, containing the minimum value for the start times of
+ * its children (and the node itself), so it's possible to search for
+ * the eligible node with the lowest finish time in logarithmic time.
+ */
+static void bfq_active_insert(struct bfq_service_tree *st,
+			      struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	struct rb_node *node = &entity->rb_node;
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	struct bfq_sched_data *sd = NULL;
+	struct bfq_group *bfqg = NULL;
+	struct bfq_data *bfqd = NULL;
+#endif
+
+	bfq_insert(&st->active, entity);
+
+	if (node->rb_left)
+		node = node->rb_left;
+	else if (node->rb_right)
+		node = node->rb_right;
+
+	bfq_update_active_tree(node);
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	sd = entity->sched_data;
+	bfqg = container_of(sd, struct bfq_group, sched_data);
+	BUG_ON(!bfqg);
+	bfqd = (struct bfq_data *)bfqg->bfqd;
+#endif
+	if (bfqq)
+		list_add(&bfqq->bfqq_list, &bfqq->bfqd->active_list);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	else { /* bfq_group */
+		BUG_ON(!bfqd);
+		bfq_weights_tree_add(bfqd, entity, &bfqd->group_weights_tree);
+	}
+	if (bfqg != bfqd->root_group) {
+		BUG_ON(!bfqg);
+		BUG_ON(!bfqd);
+		bfqg->active_entities++;
+	}
+#endif
+}
+
+/**
+ * bfq_ioprio_to_weight - calc a weight from an ioprio.
+ * @ioprio: the ioprio value to convert.
+ */
+static unsigned short bfq_ioprio_to_weight(int ioprio)
+{
+	BUG_ON(ioprio < 0 || ioprio >= IOPRIO_BE_NR);
+	return (IOPRIO_BE_NR - ioprio) * BFQ_WEIGHT_CONVERSION_COEFF;
+}
+
+/**
+ * bfq_weight_to_ioprio - calc an ioprio from a weight.
+ * @weight: the weight value to convert.
+ *
+ * To preserve as much as possible the old only-ioprio user interface,
+ * 0 is used as an escape ioprio value for weights (numerically) equal or
+ * larger than IOPRIO_BE_NR * BFQ_WEIGHT_CONVERSION_COEFF.
+ */
+static unsigned short bfq_weight_to_ioprio(int weight)
+{
+	BUG_ON(weight < BFQ_MIN_WEIGHT || weight > BFQ_MAX_WEIGHT);
+	return IOPRIO_BE_NR * BFQ_WEIGHT_CONVERSION_COEFF - weight < 0 ?
+		0 : IOPRIO_BE_NR * BFQ_WEIGHT_CONVERSION_COEFF - weight;
+}
+
+static void bfq_get_entity(struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+	if (bfqq) {
+		bfqq->ref++;
+		bfq_log_bfqq(bfqq->bfqd, bfqq, "get_entity: %p %d",
+			     bfqq, bfqq->ref);
+	}
+}
+
+/**
+ * bfq_find_deepest - find the deepest node that an extraction can modify.
+ * @node: the node being removed.
+ *
+ * Do the first step of an extraction in an rb tree, looking for the
+ * node that will replace @node, and returning the deepest node that
+ * the following modifications to the tree can touch.  If @node is the
+ * last node in the tree return %NULL.
+ */
+static struct rb_node *bfq_find_deepest(struct rb_node *node)
+{
+	struct rb_node *deepest;
+
+	if (!node->rb_right && !node->rb_left)
+		deepest = rb_parent(node);
+	else if (!node->rb_right)
+		deepest = node->rb_left;
+	else if (!node->rb_left)
+		deepest = node->rb_right;
+	else {
+		deepest = rb_next(node);
+		if (deepest->rb_right)
+			deepest = deepest->rb_right;
+		else if (rb_parent(deepest) != node)
+			deepest = rb_parent(deepest);
+	}
+
+	return deepest;
+}
+
+/**
+ * bfq_active_extract - remove an entity from the active tree.
+ * @st: the service_tree containing the tree.
+ * @entity: the entity being removed.
+ */
+static void bfq_active_extract(struct bfq_service_tree *st,
+			       struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	struct rb_node *node;
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	struct bfq_sched_data *sd = NULL;
+	struct bfq_group *bfqg = NULL;
+	struct bfq_data *bfqd = NULL;
+#endif
+
+	node = bfq_find_deepest(&entity->rb_node);
+	bfq_extract(&st->active, entity);
+
+	if (node)
+		bfq_update_active_tree(node);
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	sd = entity->sched_data;
+	bfqg = container_of(sd, struct bfq_group, sched_data);
+	BUG_ON(!bfqg);
+	bfqd = (struct bfq_data *)bfqg->bfqd;
+#endif
+	if (bfqq)
+		list_del(&bfqq->bfqq_list);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	else { /* bfq_group */
+		BUG_ON(!bfqd);
+		bfq_weights_tree_remove(bfqd, entity,
+					&bfqd->group_weights_tree);
+	}
+	if (bfqg != bfqd->root_group) {
+		BUG_ON(!bfqg);
+		BUG_ON(!bfqd);
+		BUG_ON(!bfqg->active_entities);
+		bfqg->active_entities--;
+	}
+#endif
+}
+
+/**
+ * bfq_idle_insert - insert an entity into the idle tree.
+ * @st: the service tree containing the tree.
+ * @entity: the entity to insert.
+ */
+static void bfq_idle_insert(struct bfq_service_tree *st,
+			    struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	struct bfq_entity *first_idle = st->first_idle;
+	struct bfq_entity *last_idle = st->last_idle;
+
+	if (!first_idle || bfq_gt(first_idle->finish, entity->finish))
+		st->first_idle = entity;
+	if (!last_idle || bfq_gt(entity->finish, last_idle->finish))
+		st->last_idle = entity;
+
+	bfq_insert(&st->idle, entity);
+
+	if (bfqq)
+		list_add(&bfqq->bfqq_list, &bfqq->bfqd->idle_list);
+}
+
+/**
+ * bfq_forget_entity - remove an entity from the wfq trees.
+ * @st: the service tree.
+ * @entity: the entity being removed.
+ *
+ * Update the device status and forget everything about @entity, putting
+ * the device reference to it, if it is a queue.  Entities belonging to
+ * groups are not refcounted.
+ */
+static void bfq_forget_entity(struct bfq_service_tree *st,
+			      struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	struct bfq_sched_data *sd;
+
+	BUG_ON(!entity->on_st);
+
+	entity->on_st = false;
+	st->wsum -= entity->weight;
+	if (bfqq) {
+		sd = entity->sched_data;
+		bfq_log_bfqq(bfqq->bfqd, bfqq, "forget_entity: %p %d",
+			     bfqq, bfqq->ref);
+		bfq_put_queue(bfqq);
+	}
+}
+
+/**
+ * bfq_put_idle_entity - release the idle tree ref of an entity.
+ * @st: service tree for the entity.
+ * @entity: the entity being released.
+ */
+static void bfq_put_idle_entity(struct bfq_service_tree *st,
+				struct bfq_entity *entity)
+{
+	bfq_idle_extract(st, entity);
+	bfq_forget_entity(st, entity);
+}
+
+/**
+ * bfq_forget_idle - update the idle tree if necessary.
+ * @st: the service tree to act upon.
+ *
+ * To preserve the global O(log N) complexity we only remove one entry here;
+ * as the idle tree will not grow indefinitely this can be done safely.
+ */
+static void bfq_forget_idle(struct bfq_service_tree *st)
+{
+	struct bfq_entity *first_idle = st->first_idle;
+	struct bfq_entity *last_idle = st->last_idle;
+
+	if (RB_EMPTY_ROOT(&st->active) && last_idle &&
+	    !bfq_gt(last_idle->finish, st->vtime)) {
+		/*
+		 * Forget the whole idle tree, increasing the vtime past
+		 * the last finish time of idle entities.
+		 */
+		st->vtime = last_idle->finish;
+	}
+
+	if (first_idle && !bfq_gt(first_idle->finish, st->vtime))
+		bfq_put_idle_entity(st, first_idle);
+}
+
+static struct bfq_service_tree *
+__bfq_entity_update_weight_prio(struct bfq_service_tree *old_st,
+			 struct bfq_entity *entity)
+{
+	struct bfq_service_tree *new_st = old_st;
+
+	if (entity->prio_changed) {
+		struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+		unsigned int prev_weight, new_weight;
+		struct bfq_data *bfqd = NULL;
+		struct rb_root *root;
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		struct bfq_sched_data *sd;
+		struct bfq_group *bfqg;
+#endif
+
+		if (bfqq)
+			bfqd = bfqq->bfqd;
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		else {
+			sd = entity->my_sched_data;
+			bfqg = container_of(sd, struct bfq_group, sched_data);
+			BUG_ON(!bfqg);
+			bfqd = (struct bfq_data *)bfqg->bfqd;
+			BUG_ON(!bfqd);
+		}
+#endif
+
+		BUG_ON(old_st->wsum < entity->weight);
+		old_st->wsum -= entity->weight;
+
+		if (entity->new_weight != entity->orig_weight) {
+			if (entity->new_weight < BFQ_MIN_WEIGHT ||
+			    entity->new_weight > BFQ_MAX_WEIGHT) {
+				pr_crit("update_weight_prio: new_weight %d\n",
+					entity->new_weight);
+				if (entity->new_weight < BFQ_MIN_WEIGHT)
+					entity->new_weight = BFQ_MIN_WEIGHT;
+				else
+					entity->new_weight = BFQ_MAX_WEIGHT;
+			}
+			entity->orig_weight = entity->new_weight;
+			if (bfqq)
+				bfqq->ioprio =
+				  bfq_weight_to_ioprio(entity->orig_weight);
+		}
+
+		if (bfqq)
+			bfqq->ioprio_class = bfqq->new_ioprio_class;
+		entity->prio_changed = 0;
+
+		/*
+		 * NOTE: here we may be changing the weight too early,
+		 * this will cause unfairness.  The correct approach
+		 * would have required additional complexity to defer
+		 * weight changes to the proper time instants (i.e.,
+		 * when entity->finish <= old_st->vtime).
+		 */
+		new_st = bfq_entity_service_tree(entity);
+
+		prev_weight = entity->weight;
+		new_weight = entity->orig_weight *
+			     (bfqq ? bfqq->wr_coeff : 1);
+		/*
+		 * If the weight of the entity changes, remove the entity
+		 * from its old weight counter (if there is a counter
+		 * associated with the entity), and add it to the counter
+		 * associated with its new weight.
+		 */
+		if (prev_weight != new_weight) {
+			if (bfqq)
+				bfq_log_bfqq(bfqq->bfqd, bfqq,
+					     "weight changed %d %d(%d %d)",
+					     prev_weight, new_weight,
+					     entity->orig_weight,
+					     bfqq->wr_coeff);
+
+			root = bfqq ? &bfqd->queue_weights_tree :
+				      &bfqd->group_weights_tree;
+			bfq_weights_tree_remove(bfqd, entity, root);
+		}
+		entity->weight = new_weight;
+		/*
+		 * Add the entity to its weights tree only if it is
+		 * not associated with a weight-raised queue.
+		 */
+		if (prev_weight != new_weight &&
+		    (bfqq ? bfqq->wr_coeff == 1 : 1))
+			/* If we get here, root has been initialized. */
+			bfq_weights_tree_add(bfqd, entity, root);
+
+		new_st->wsum += entity->weight;
+
+		if (new_st != old_st)
+			entity->start = new_st->vtime;
+	}
+
+	return new_st;
+}
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static void bfqg_stats_set_start_empty_time(struct bfq_group *bfqg);
+#endif
+
+/**
+ * bfq_bfqq_served - update the scheduler status after selection for
+ *                   service.
+ * @bfqq: the queue being served.
+ * @served: bytes to transfer.
+ *
+ * NOTE: this can be optimized, as the timestamps of upper level entities
+ * are synchronized every time a new bfqq is selected for service.  By now,
+ * we keep it to better check consistency.
+ */
+static void bfq_bfqq_served(struct bfq_queue *bfqq, int served)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+	struct bfq_service_tree *st;
+
+	for_each_entity(entity) {
+		st = bfq_entity_service_tree(entity);
+
+		entity->service += served;
+
+		BUG_ON(st->wsum == 0);
+
+		st->vtime += bfq_delta(served, st->wsum);
+		bfq_forget_idle(st);
+	}
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	bfqg_stats_set_start_empty_time(bfqq_group(bfqq));
+#endif
+	st = bfq_entity_service_tree(&bfqq->entity);
+	bfq_log_bfqq(bfqq->bfqd, bfqq, "bfqq_served %d secs, vtime %llu on %p",
+		     served,  ((st->vtime>>10)*1000)>>12, st);
+}
+
+/**
+ * bfq_bfqq_charge_time - charge an amount of service equivalent to the length
+ *			  of the time interval during which bfqq has been in
+ *			  service.
+ * @bfqd: the device
+ * @bfqq: the queue that needs a service update.
+ * @time_ms: the amount of time during which the queue has received service
+ *
+ * If a queue does not consume its budget fast enough, then providing
+ * the queue with service fairness may impair throughput, more or less
+ * severely. For this reason, queues that consume their budget slowly
+ * are provided with time fairness instead of service fairness. This
+ * goal is achieved through the BFQ scheduling engine, even if such an
+ * engine works in the service, and not in the time domain. The trick
+ * is charging these queues with an inflated amount of service, equal
+ * to the amount of service that they would have received during their
+ * service slot if they had been fast, i.e., if their requests had
+ * been dispatched at a rate equal to the estimated peak rate.
+ *
+ * It is worth noting that time fairness can cause important
+ * distortions in terms of bandwidth distribution, on devices with
+ * internal queueing. The reason is that I/O requests dispatched
+ * during the service slot of a queue may be served after that service
+ * slot is finished, and may have a total processing time loosely
+ * correlated with the duration of the service slot. This is
+ * especially true for short service slots.
+ */
+static void bfq_bfqq_charge_time(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+				 unsigned long time_ms)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+	int tot_serv_to_charge = entity->service;
+	unsigned int timeout_ms = jiffies_to_msecs(bfq_timeout);
+
+	if (time_ms > 0 && time_ms < timeout_ms)
+		tot_serv_to_charge =
+			(bfqd->bfq_max_budget * time_ms) / timeout_ms;
+
+	if (tot_serv_to_charge < entity->service)
+		tot_serv_to_charge = entity->service;
+
+	bfq_log_bfqq(bfqq->bfqd, bfqq,
+		     "charge_time: %lu/%u ms, %d/%d/%d sectors",
+		     time_ms, timeout_ms, entity->service,
+		     tot_serv_to_charge, entity->budget);
+
+	/* Increase budget to avoid inconsistencies */
+	if (tot_serv_to_charge > entity->budget)
+		entity->budget = tot_serv_to_charge;
+
+	bfq_bfqq_served(bfqq,
+			max_t(int, 0, tot_serv_to_charge - entity->service));
+}
+
+static void bfq_update_fin_time_enqueue(struct bfq_entity *entity,
+					struct bfq_service_tree *st,
+					bool backshifted)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	struct bfq_sched_data *sd = entity->sched_data;
+
+	st = __bfq_entity_update_weight_prio(st, entity);
+	bfq_calc_finish(entity, entity->budget);
+
+	/*
+	 * If some queues enjoy backshifting for a while, then their
+	 * (virtual) finish timestamps may happen to become lower and
+	 * lower than the system virtual time.  In particular, if
+	 * these queues often happen to be idle for short time
+	 * periods, and during such time periods other queues with
+	 * higher timestamps happen to be busy, then the backshifted
+	 * timestamps of the former queues can become much lower than
+	 * the system virtual time. In fact, to serve the queues with
+	 * higher timestamps while the ones with lower timestamps are
+	 * idle, the system virtual time may be pushed-up to much
+	 * higher values than the finish timestamps of the idle
+	 * queues. As a consequence, the finish timestamps of all new
+	 * or newly activated queues may end up being much larger than
+	 * those of lucky queues with backshifted timestamps. The
+	 * latter queues may then monopolize the device for a lot of
+	 * time. This would simply break service guarantees.
+	 *
+	 * To reduce this problem, push up a little bit the
+	 * backshifted timestamps of the queue associated with this
+	 * entity (only a queue can happen to have the backshifted
+	 * flag set): just enough to let the finish timestamp of the
+	 * queue be equal to the current value of the system virtual
+	 * time. This may introduce a little unfairness among queues
+	 * with backshifted timestamps, but it does not break
+	 * worst-case fairness guarantees.
+	 *
+	 * As a special case, if bfqq is weight-raised, push up
+	 * timestamps much less, to keep very low the probability that
+	 * this push up causes the backshifted finish timestamps of
+	 * weight-raised queues to become higher than the backshifted
+	 * finish timestamps of non weight-raised queues.
+	 */
+	if (backshifted && bfq_gt(st->vtime, entity->finish)) {
+		unsigned long delta = st->vtime - entity->finish;
+
+		if (bfqq)
+			delta /= bfqq->wr_coeff;
+
+		entity->start += delta;
+		entity->finish += delta;
+
+		if (bfqq) {
+			bfq_log_bfqq(bfqq->bfqd, bfqq,
+				     "__activate_entity: new queue finish %llu",
+				     ((entity->finish>>10)*1000)>>12);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		} else {
+			struct bfq_group *bfqg =
+				container_of(entity, struct bfq_group, entity);
+
+			bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+				     "__activate_entity: new group finish %llu",
+				     ((entity->finish>>10)*1000)>>12);
+#endif
+		}
+	}
+
+	bfq_active_insert(st, entity);
+
+	if (bfqq) {
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			"__activate_entity: queue %seligible in st %p",
+			     entity->start <= st->vtime ? "" : "non ", st);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	} else {
+		struct bfq_group *bfqg =
+			container_of(entity, struct bfq_group, entity);
+
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			"__activate_entity: group %seligible in st %p",
+			     entity->start <= st->vtime ? "" : "non ", st);
+#endif
+	}
+	BUG_ON(RB_EMPTY_ROOT(&st->active));
+	BUG_ON(&st->active != &sd->service_tree->active &&
+	       &st->active != &(sd->service_tree+1)->active &&
+	       &st->active != &(sd->service_tree+2)->active);
+}
+
+/**
+ * __bfq_activate_entity - handle activation of entity.
+ * @entity: the entity being activated.
+ * @non_blocking_wait_rq: true if entity was waiting for a request
+ *
+ * Called for a 'true' activation, i.e., if entity is not active and
+ * one of its children receives a new request.
+ *
+ * Basically, this function updates the timestamps of entity and
+ * inserts entity into its active tree, ater possible extracting it
+ * from its idle tree.
+ */
+static void __bfq_activate_entity(struct bfq_entity *entity,
+				  bool non_blocking_wait_rq)
+{
+	struct bfq_sched_data *sd = entity->sched_data;
+	struct bfq_service_tree *st = bfq_entity_service_tree(entity);
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	bool backshifted = false;
+	unsigned long long min_vstart;
+
+	BUG_ON(!sd);
+	BUG_ON(!st);
+
+	/* See comments on bfq_fqq_update_budg_for_activation */
+	if (non_blocking_wait_rq && bfq_gt(st->vtime, entity->finish)) {
+		backshifted = true;
+		min_vstart = entity->finish;
+	} else
+		min_vstart = st->vtime;
+
+	if (entity->tree == &st->idle) {
+		/*
+		 * Must be on the idle tree, bfq_idle_extract() will
+		 * check for that.
+		 */
+		bfq_idle_extract(st, entity);
+		entity->start = bfq_gt(min_vstart, entity->finish) ?
+			min_vstart : entity->finish;
+	} else {
+		/*
+		 * The finish time of the entity may be invalid, and
+		 * it is in the past for sure, otherwise the queue
+		 * would have been on the idle tree.
+		 */
+		entity->start = min_vstart;
+		st->wsum += entity->weight;
+		bfq_get_entity(entity);
+
+		BUG_ON(entity->on_st && bfqq);
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		if (entity->on_st && !bfqq) {
+			struct bfq_group *bfqg =
+				container_of(entity, struct bfq_group,
+					     entity);
+
+			bfq_log_bfqg((struct bfq_data *)bfqg->bfqd,
+				     bfqg,
+				     "activate bug, class %d in_service %p",
+				     bfq_class_idx(entity), sd->in_service_entity);
+		}
+#endif
+		BUG_ON(entity->on_st && !bfqq);
+		entity->on_st = true;
+	}
+
+	bfq_update_fin_time_enqueue(entity, st, backshifted);
+}
+
+/**
+ * __bfq_requeue_entity - handle requeueing or repositioning of an entity.
+ * @entity: the entity being requeued or repositioned.
+ *
+ * Requeueing is needed if this entity stops being served, which
+ * happens if a leaf descendant entity has expired. On the other hand,
+ * repositioning is needed if the next_inservice_entity for the child
+ * entity has changed. See the comments inside the function for
+ * details.
+ *
+ * Basically, this function: 1) removes entity from its active tree if
+ * present there, 2) updates the timestamps of entity and 3) inserts
+ * entity back into its active tree (in the new, right position for
+ * the new values of the timestamps).
+ */
+static void __bfq_requeue_entity(struct bfq_entity *entity)
+{
+	struct bfq_sched_data *sd = entity->sched_data;
+	struct bfq_service_tree *st = bfq_entity_service_tree(entity);
+
+	BUG_ON(!sd);
+	BUG_ON(!st);
+
+	BUG_ON(entity != sd->in_service_entity &&
+	       entity->tree != &st->active);
+
+	if (entity == sd->in_service_entity) {
+		/*
+		 * We are requeueing the current in-service entity,
+		 * which may have to be done for one of the following
+		 * reasons:
+		 * - entity represents the in-service queue, and the
+		 *   in-service queue is being requeued after an
+		 *   expiration;
+		 * - entity represents a group, and its budget has
+		 *   changed because one of its child entities has
+		 *   just been either activated or requeued for some
+		 *   reason; the timestamps of the entity need then to
+		 *   be updated, and the entity needs to be enqueued
+		 *   or repositioned accordingly.
+		 *
+		 * In particular, before requeueing, the start time of
+		 * the entity must be moved forward to account for the
+		 * service that the entity has received while in
+		 * service. This is done by the next instructions. The
+		 * finish time will then be updated according to this
+		 * new value of the start time, and to the budget of
+		 * the entity.
+		 */
+		bfq_calc_finish(entity, entity->service);
+		entity->start = entity->finish;
+		BUG_ON(entity->tree && entity->tree != &st->active);
+		/*
+		 * In addition, if the entity had more than one child
+		 * when set in service, then was not extracted from
+		 * the active tree. This implies that the position of
+		 * the entity in the active tree may need to be
+		 * changed now, because we have just updated the start
+		 * time of the entity, and we will update its finish
+		 * time in a moment (the requeueing is then, more
+		 * precisely, a repositioning in this case). To
+		 * implement this repositioning, we: 1) dequeue the
+		 * entity here, 2) update the finish time and
+		 * requeue the entity according to the new
+		 * timestamps below.
+		 */
+		if (entity->tree)
+			bfq_active_extract(st, entity);
+	} else { /* The entity is already active, and not in service */
+		/*
+		 * In this case, this function gets called only if the
+		 * next_in_service entity below this entity has
+		 * changed, and this change has caused the budget of
+		 * this entity to change, which, finally implies that
+		 * the finish time of this entity must be
+		 * updated. Such an update may cause the scheduling,
+		 * i.e., the position in the active tree, of this
+		 * entity to change. We handle this change by: 1)
+		 * dequeueing the entity here, 2) updating the finish
+		 * time and requeueing the entity according to the new
+		 * timestamps below. This is the same approach as the
+		 * non-extracted-entity sub-case above.
+		 */
+		bfq_active_extract(st, entity);
+	}
+
+	bfq_update_fin_time_enqueue(entity, st, false);
+}
+
+static void __bfq_activate_requeue_entity(struct bfq_entity *entity,
+					  struct bfq_sched_data *sd,
+					  bool non_blocking_wait_rq)
+{
+	struct bfq_service_tree *st = bfq_entity_service_tree(entity);
+
+	if (sd->in_service_entity == entity || entity->tree == &st->active)
+		 /*
+		  * in service or already queued on the active tree,
+		  * requeue or reposition
+		  */
+		__bfq_requeue_entity(entity);
+	else
+		/*
+		 * Not in service and not queued on its active tree:
+		 * the activity is idle and this is a true activation.
+		 */
+		__bfq_activate_entity(entity, non_blocking_wait_rq);
+}
+
+
+/**
+ * bfq_activate_entity - activate or requeue an entity representing a bfq_queue,
+ *			 and activate, requeue or reposition all ancestors
+ *			 for which such an update becomes necessary.
+ * @entity: the entity to activate.
+ * @non_blocking_wait_rq: true if this entity was waiting for a request
+ * @requeue: true if this is a requeue, which implies that bfqq is
+ *	     being expired; thus ALL its ancestors stop being served and must
+ *	     therefore be requeued
+ */
+static void bfq_activate_requeue_entity(struct bfq_entity *entity,
+					bool non_blocking_wait_rq,
+					bool requeue)
+{
+	struct bfq_sched_data *sd;
+
+	for_each_entity(entity) {
+		BUG_ON(!entity);
+		sd = entity->sched_data;
+		__bfq_activate_requeue_entity(entity, sd, non_blocking_wait_rq);
+
+		BUG_ON(RB_EMPTY_ROOT(&sd->service_tree->active) &&
+		       RB_EMPTY_ROOT(&(sd->service_tree+1)->active) &&
+		       RB_EMPTY_ROOT(&(sd->service_tree+2)->active));
+
+		if (!bfq_update_next_in_service(sd, entity) && !requeue) {
+			BUG_ON(!sd->next_in_service);
+			break;
+		}
+		BUG_ON(!sd->next_in_service);
+	}
+}
+
+/**
+ * __bfq_deactivate_entity - deactivate an entity from its service tree.
+ * @entity: the entity to deactivate.
+ * @ins_into_idle_tree: if false, the entity will not be put into the
+ *			idle tree.
+ *
+ * Deactivates an entity, independently from its previous state.  Must
+ * be invoked only if entity is on a service tree. Extracts the entity
+ * from that tree, and if necessary and allowed, puts it on the idle
+ * tree.
+ */
+static bool __bfq_deactivate_entity(struct bfq_entity *entity,
+				    bool ins_into_idle_tree)
+{
+	struct bfq_sched_data *sd = entity->sched_data;
+	struct bfq_service_tree *st = bfq_entity_service_tree(entity);
+	bool was_in_service = entity == sd->in_service_entity;
+
+	if (!entity->on_st) { /* entity never activated, or already inactive */
+		BUG_ON(entity == entity->sched_data->in_service_entity);
+		return false;
+	}
+
+	BUG_ON(was_in_service && entity->tree && entity->tree != &st->active);
+
+	if (was_in_service)
+		bfq_calc_finish(entity, entity->service);
+
+	if (entity->tree == &st->active)
+		bfq_active_extract(st, entity);
+	else if (!was_in_service && entity->tree == &st->idle)
+		bfq_idle_extract(st, entity);
+	else if (entity->tree)
+		BUG();
+
+	if (!ins_into_idle_tree || !bfq_gt(entity->finish, st->vtime))
+		bfq_forget_entity(st, entity);
+	else
+		bfq_idle_insert(st, entity);
+
+	return true;
+}
+
+/**
+ * bfq_deactivate_entity - deactivate an entity representing a bfq_queue.
+ * @entity: the entity to deactivate.
+ * @ins_into_idle_tree: true if the entity can be put on the idle tree
+ */
+static void bfq_deactivate_entity(struct bfq_entity *entity,
+				  bool ins_into_idle_tree,
+				  bool expiration)
+{
+	struct bfq_sched_data *sd;
+	struct bfq_entity *parent;
+
+	for_each_entity_safe(entity, parent) {
+		sd = entity->sched_data;
+
+		BUG_ON(sd == NULL); /*
+				     * It would mean that this is the
+				     * root group.
+				     */
+
+		BUG_ON(expiration && entity != sd->in_service_entity);
+
+		BUG_ON(entity != sd->in_service_entity &&
+		       entity->tree ==
+		       &bfq_entity_service_tree(entity)->active &&
+		       !sd->next_in_service);
+
+		if (!__bfq_deactivate_entity(entity, ins_into_idle_tree)) {
+			/*
+			 * Entity is not any tree any more, so, this
+			 * deactivation is a no-op, and there is
+			 * nothing to change for upper-level entities
+			 * (in case of expiration, this can never
+			 * happen).
+			 */
+			BUG_ON(expiration); /*
+					     * entity cannot be already out of
+					     * any tree
+					     */
+			return;
+		}
+
+		if (sd->next_in_service == entity)
+			/*
+			 * entity was the next_in_service entity,
+			 * then, since entity has just been
+			 * deactivated, a new one must be found.
+			 */
+			bfq_update_next_in_service(sd, NULL);
+
+		if (sd->next_in_service) {
+			/*
+			 * The parent entity is still backlogged,
+			 * because next_in_service is not NULL. So, no
+			 * further upwards deactivation must be
+			 * performed.  Yet, next_in_service has
+			 * changed.  Then the schedule does need to be
+			 * updated upwards.
+			 */
+			BUG_ON(sd->next_in_service == entity);
+			break;
+		}
+
+		/*
+		 * If we get here, then the parent is no more
+		 * backlogged and we need to propagate the
+		 * deactivation upwards. Thus let the loop go on.
+		 */
+
+		/*
+		 * Also let parent be queued into the idle tree on
+		 * deactivation, to preserve service guarantees, and
+		 * assuming that who invoked this function does not
+		 * need parent entities too to be removed completely.
+		 */
+		ins_into_idle_tree = true;
+	}
+
+	/*
+	 * If the deactivation loop is fully executed, then there are
+	 * no more entities to touch and next loop is not executed at
+	 * all. Otherwise, requeue remaining entities if they are
+	 * about to stop receiving service, or reposition them if this
+	 * is not the case.
+	 */
+	entity = parent;
+	for_each_entity(entity) {
+		struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+		/*
+		 * Invoke __bfq_requeue_entity on entity, even if
+		 * already active, to requeue/reposition it in the
+		 * active tree (because sd->next_in_service has
+		 * changed)
+		 */
+		__bfq_requeue_entity(entity);
+
+		sd = entity->sched_data;
+		BUG_ON(expiration && sd->in_service_entity != entity);
+
+		if (bfqq)
+			bfq_log_bfqq(bfqq->bfqd, bfqq,
+				     "invoking udpdate_next for this queue");
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		else {
+			struct bfq_group *bfqg =
+				container_of(entity,
+					     struct bfq_group, entity);
+
+			bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+				     "invoking udpdate_next for this entity");
+		}
+#endif
+		if (!bfq_update_next_in_service(sd, entity) &&
+		    !expiration)
+			/*
+			 * next_in_service unchanged or not causing
+			 * any change in entity->parent->sd, and no
+			 * requeueing needed for expiration: stop
+			 * here.
+			 */
+			break;
+	}
+}
+
+/**
+ * bfq_calc_vtime_jump - compute the value to which the vtime should jump,
+ *                       if needed, to have at least one entity eligible.
+ * @st: the service tree to act upon.
+ *
+ * Assumes that st is not empty.
+ */
+static u64 bfq_calc_vtime_jump(struct bfq_service_tree *st)
+{
+	struct bfq_entity *root_entity = bfq_root_active_entity(&st->active);
+
+	if (bfq_gt(root_entity->min_start, st->vtime)) {
+		struct bfq_queue *bfqq = bfq_entity_to_bfqq(root_entity);
+
+		if (bfqq)
+			bfq_log_bfqq(bfqq->bfqd, bfqq,
+				     "calc_vtime_jump: new value %llu",
+				     root_entity->min_start);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		else {
+			struct bfq_group *bfqg =
+				container_of(root_entity, struct bfq_group,
+					     entity);
+
+			bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+				     "calc_vtime_jump: new value %llu",
+				     root_entity->min_start);
+		}
+#endif
+		return root_entity->min_start;
+	}
+	return st->vtime;
+}
+
+static void bfq_update_vtime(struct bfq_service_tree *st, u64 new_value)
+{
+	if (new_value > st->vtime) {
+		st->vtime = new_value;
+		bfq_forget_idle(st);
+	}
+}
+
+/**
+ * bfq_first_active_entity - find the eligible entity with
+ *                           the smallest finish time
+ * @st: the service tree to select from.
+ * @vtime: the system virtual to use as a reference for eligibility
+ *
+ * This function searches the first schedulable entity, starting from the
+ * root of the tree and going on the left every time on this side there is
+ * a subtree with at least one eligible (start >= vtime) entity. The path on
+ * the right is followed only if a) the left subtree contains no eligible
+ * entities and b) no eligible entity has been found yet.
+ */
+static struct bfq_entity *bfq_first_active_entity(struct bfq_service_tree *st,
+						  u64 vtime)
+{
+	struct bfq_entity *entry, *first = NULL;
+	struct rb_node *node = st->active.rb_node;
+
+	while (node) {
+		entry = rb_entry(node, struct bfq_entity, rb_node);
+left:
+		if (!bfq_gt(entry->start, vtime))
+			first = entry;
+
+		BUG_ON(bfq_gt(entry->min_start, vtime));
+
+		if (node->rb_left) {
+			entry = rb_entry(node->rb_left,
+					 struct bfq_entity, rb_node);
+			if (!bfq_gt(entry->min_start, vtime)) {
+				node = node->rb_left;
+				goto left;
+			}
+		}
+		if (first)
+			break;
+		node = node->rb_right;
+	}
+
+	BUG_ON(!first && !RB_EMPTY_ROOT(&st->active));
+	return first;
+}
+
+/**
+ * __bfq_lookup_next_entity - return the first eligible entity in @st.
+ * @st: the service tree.
+ *
+ * If there is no in-service entity for the sched_data st belongs to,
+ * then return the entity that will be set in service if:
+ * 1) the parent entity this st belongs to is set in service;
+ * 2) no entity belonging to such parent entity undergoes a state change
+ * that would influence the timestamps of the entity (e.g., becomes idle,
+ * becomes backlogged, changes its budget, ...).
+ *
+ * In this first case, update the virtual time in @st too (see the
+ * comments on this update inside the function).
+ *
+ * In constrast, if there is an in-service entity, then return the
+ * entity that would be set in service if not only the above
+ * conditions, but also the next one held true: the currently
+ * in-service entity, on expiration,
+ * 1) gets a finish time equal to the current one, or
+ * 2) is not eligible any more, or
+ * 3) is idle.
+ */
+static struct bfq_entity *
+__bfq_lookup_next_entity(struct bfq_service_tree *st, bool in_service
+#if 0
+			 , bool force
+#endif
+	)
+{
+	struct bfq_entity *entity
+#if 0
+		, *new_next_in_service = NULL
+#endif
+		;
+	u64 new_vtime;
+	struct bfq_queue *bfqq;
+
+	if (RB_EMPTY_ROOT(&st->active))
+		return NULL;
+
+	/*
+	 * Get the value of the system virtual time for which at
+	 * least one entity is eligible.
+	 */
+	new_vtime = bfq_calc_vtime_jump(st);
+
+	/*
+	 * If there is no in-service entity for the sched_data this
+	 * active tree belongs to, then push the system virtual time
+	 * up to the value that guarantees that at least one entity is
+	 * eligible. If, instead, there is an in-service entity, then
+	 * do not make any such update, because there is already an
+	 * eligible entity, namely the in-service one (even if the
+	 * entity is not on st, because it was extracted when set in
+	 * service).
+	 */
+	if (!in_service)
+		bfq_update_vtime(st, new_vtime);
+
+	entity = bfq_first_active_entity(st, new_vtime);
+	BUG_ON(bfq_gt(entity->start, new_vtime));
+
+	/* Log some information */
+	bfqq = bfq_entity_to_bfqq(entity);
+	if (bfqq)
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			     "__lookup_next: start %llu vtime %llu st %p",
+			     ((entity->start>>10)*1000)>>12,
+			     ((new_vtime>>10)*1000)>>12, st);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	else {
+		struct bfq_group *bfqg =
+			container_of(entity, struct bfq_group, entity);
+
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			     "__lookup_next: start %llu vtime %llu st %p",
+			     ((entity->start>>10)*1000)>>12,
+			     ((new_vtime>>10)*1000)>>12, st);
+	}
+#endif
+
+	BUG_ON(!entity);
+
+	return entity;
+}
+
+/**
+ * bfq_lookup_next_entity - return the first eligible entity in @sd.
+ * @sd: the sched_data.
+ *
+ * This function is invoked when there has been a change in the trees
+ * for sd, and we need know what is the new next entity after this
+ * change.
+ */
+static struct bfq_entity *bfq_lookup_next_entity(struct bfq_sched_data *sd)
+{
+	struct bfq_service_tree *st = sd->service_tree;
+	struct bfq_service_tree *idle_class_st = st + (BFQ_IOPRIO_CLASSES - 1);
+	struct bfq_entity *entity = NULL;
+	struct bfq_queue *bfqq;
+	int class_idx = 0;
+
+	BUG_ON(!sd);
+	BUG_ON(!st);
+	/*
+	 * Choose from idle class, if needed to guarantee a minimum
+	 * bandwidth to this class (and if there is some active entity
+	 * in idle class). This should also mitigate
+	 * priority-inversion problems in case a low priority task is
+	 * holding file system resources.
+	 */
+	if (time_is_before_jiffies(sd->bfq_class_idle_last_service +
+				   BFQ_CL_IDLE_TIMEOUT)) {
+		if (!RB_EMPTY_ROOT(&idle_class_st->active))
+			class_idx = BFQ_IOPRIO_CLASSES - 1;
+		/* About to be served if backlogged, or not yet backlogged */
+		sd->bfq_class_idle_last_service = jiffies;
+	}
+
+	/*
+	 * Find the next entity to serve for the highest-priority
+	 * class, unless the idle class needs to be served.
+	 */
+	for (; class_idx < BFQ_IOPRIO_CLASSES; class_idx++) {
+		entity = __bfq_lookup_next_entity(st + class_idx,
+						  sd->in_service_entity);
+
+		if (entity)
+			break;
+	}
+
+	BUG_ON(!entity &&
+	       (!RB_EMPTY_ROOT(&st->active) || !RB_EMPTY_ROOT(&(st+1)->active) ||
+		!RB_EMPTY_ROOT(&(st+2)->active)));
+
+	if (!entity)
+		return NULL;
+
+	/* Log some information */
+	bfqq = bfq_entity_to_bfqq(entity);
+	if (bfqq)
+		bfq_log_bfqq(bfqq->bfqd, bfqq, "chosen from st %p %d",
+			     st + class_idx, class_idx);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	else {
+		struct bfq_group *bfqg =
+			container_of(entity, struct bfq_group, entity);
+
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			     "chosen from st %p %d",
+			     st + class_idx, class_idx);
+	}
+#endif
+
+	return entity;
+}
+
+static bool next_queue_may_preempt(struct bfq_data *bfqd)
+{
+	struct bfq_sched_data *sd = &bfqd->root_group->sched_data;
+
+	return sd->next_in_service != sd->in_service_entity;
+}
+
+/*
+ * Get next queue for service.
+ */
+static struct bfq_queue *bfq_get_next_queue(struct bfq_data *bfqd)
+{
+	struct bfq_entity *entity = NULL;
+	struct bfq_sched_data *sd;
+	struct bfq_queue *bfqq;
+
+	BUG_ON(bfqd->in_service_queue);
+
+	if (bfqd->busy_queues == 0)
+		return NULL;
+
+	/*
+	 * Traverse the path from the root to the leaf entity to
+	 * serve. Set in service all the entities visited along the
+	 * way.
+	 */
+	sd = &bfqd->root_group->sched_data;
+	for (; sd ; sd = entity->my_sched_data) {
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		if (entity) {
+			struct bfq_group *bfqg =
+				container_of(entity, struct bfq_group, entity);
+
+			bfq_log_bfqg(bfqd, bfqg,
+				     "get_next_queue: lookup in this group");
+			if (!sd->next_in_service)
+				pr_crit("get_next_queue: lookup in this group");
+		} else {
+			bfq_log_bfqg(bfqd, bfqd->root_group,
+				     "get_next_queue: lookup in root group");
+			if (!sd->next_in_service)
+				pr_crit("get_next_queue: lookup in root group");
+		}
+#endif
+
+		BUG_ON(!sd->next_in_service);
+
+		/*
+		 * WARNING. We are about to set the in-service entity
+		 * to sd->next_in_service, i.e., to the (cached) value
+		 * returned by bfq_lookup_next_entity(sd) the last
+		 * time it was invoked, i.e., the last time when the
+		 * service order in sd changed as a consequence of the
+		 * activation or deactivation of an entity. In this
+		 * respect, if we execute bfq_lookup_next_entity(sd)
+		 * in this very moment, it may, although with low
+		 * probability, yield a different entity than that
+		 * pointed to by sd->next_in_service. This rare event
+		 * happens in case there was no CLASS_IDLE entity to
+		 * serve for sd when bfq_lookup_next_entity(sd) was
+		 * invoked for the last time, while there is now one
+		 * such entity.
+		 *
+		 * If the above event happens, then the scheduling of
+		 * such entity in CLASS_IDLE is postponed until the
+		 * service of the sd->next_in_service entity
+		 * finishes. In fact, when the latter is expired,
+		 * bfq_lookup_next_entity(sd) gets called again,
+		 * exactly to update sd->next_in_service.
+		 */
+
+		/* Make next_in_service entity become in_service_entity */
+		entity = sd->next_in_service;
+		sd->in_service_entity = entity;
+
+		/*
+		 * Reset the accumulator of the amount of service that
+		 * the entity is about to receive.
+		 */
+		entity->service = 0;
+
+		/*
+		 * If entity is no longer a candidate for next
+		 * service, then we extract it from its active tree,
+		 * for the following reason. To further boost the
+		 * throughput in some special case, BFQ needs to know
+		 * which is the next candidate entity to serve, while
+		 * there is already an entity in service. In this
+		 * respect, to make it easy to compute/update the next
+		 * candidate entity to serve after the current
+		 * candidate has been set in service, there is a case
+		 * where it is necessary to extract the current
+		 * candidate from its service tree. Such a case is
+		 * when the entity just set in service cannot be also
+		 * a candidate for next service. Details about when
+		 * this conditions holds are reported in the comments
+		 * on the function bfq_no_longer_next_in_service()
+		 * invoked below.
+		 */
+		if (bfq_no_longer_next_in_service(entity))
+			bfq_active_extract(bfq_entity_service_tree(entity),
+					   entity);
+
+		/*
+		 * For the same reason why we may have just extracted
+		 * entity from its active tree, we may need to update
+		 * next_in_service for the sched_data of entity too,
+		 * regardless of whether entity has been extracted.
+		 * In fact, even if entity has not been extracted, a
+		 * descendant entity may get extracted. Such an event
+		 * would cause a change in next_in_service for the
+		 * level of the descendant entity, and thus possibly
+		 * back to upper levels.
+		 *
+		 * We cannot perform the resulting needed update
+		 * before the end of this loop, because, to know which
+		 * is the correct next-to-serve candidate entity for
+		 * each level, we need first to find the leaf entity
+		 * to set in service. In fact, only after we know
+		 * which is the next-to-serve leaf entity, we can
+		 * discover whether the parent entity of the leaf
+		 * entity becomes the next-to-serve, and so on.
+		 */
+
+		/* Log some information */
+		bfqq = bfq_entity_to_bfqq(entity);
+		if (bfqq)
+			bfq_log_bfqq(bfqd, bfqq,
+			     "get_next_queue: this queue, finish %llu",
+				(((entity->finish>>10)*1000)>>10)>>2);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+		else {
+			struct bfq_group *bfqg =
+				container_of(entity, struct bfq_group, entity);
+
+			bfq_log_bfqg(bfqd, bfqg,
+			     "get_next_queue: this entity, finish %llu",
+				(((entity->finish>>10)*1000)>>10)>>2);
+		}
+#endif
+
+	}
+
+	BUG_ON(!entity);
+	bfqq = bfq_entity_to_bfqq(entity);
+	BUG_ON(!bfqq);
+
+	/*
+	 * We can finally update all next-to-serve entities along the
+	 * path from the leaf entity just set in service to the root.
+	 */
+	for_each_entity(entity) {
+		struct bfq_sched_data *sd = entity->sched_data;
+
+		if(!bfq_update_next_in_service(sd, NULL))
+			break;
+	}
+
+	return bfqq;
+}
+
+static void __bfq_bfqd_reset_in_service(struct bfq_data *bfqd)
+{
+	struct bfq_entity *entity = &bfqd->in_service_queue->entity;
+
+	if (bfqd->in_service_bic) {
+		put_io_context(bfqd->in_service_bic->icq.ioc);
+		bfqd->in_service_bic = NULL;
+	}
+
+	bfq_clear_bfqq_wait_request(bfqd->in_service_queue);
+	hrtimer_try_to_cancel(&bfqd->idle_slice_timer);
+	bfqd->in_service_queue = NULL;
+
+	/*
+	 * When this function is called, all in-service entities have
+	 * been properly deactivated or requeued, so we can safely
+	 * execute the final step: reset in_service_entity along the
+	 * path from entity to the root.
+	 */
+	for_each_entity(entity)
+		entity->sched_data->in_service_entity = NULL;
+}
+
+static void bfq_deactivate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+				bool ins_into_idle_tree, bool expiration)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+
+	bfq_deactivate_entity(entity, ins_into_idle_tree, expiration);
+}
+
+static void bfq_activate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+	struct bfq_service_tree *st = bfq_entity_service_tree(entity);
+
+	BUG_ON(bfqq == bfqd->in_service_queue);
+	BUG_ON(entity->tree != &st->active && entity->tree != &st->idle &&
+	       entity->on_st);
+
+	bfq_activate_requeue_entity(entity, bfq_bfqq_non_blocking_wait_rq(bfqq),
+				    false);
+	bfq_clear_bfqq_non_blocking_wait_rq(bfqq);
+}
+
+static void bfq_requeue_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	struct bfq_entity *entity = &bfqq->entity;
+
+	bfq_activate_requeue_entity(entity, false,
+				    bfqq == bfqd->in_service_queue);
+}
+
+static void bfqg_stats_update_dequeue(struct bfq_group *bfqg);
+
+/*
+ * Called when the bfqq no longer has requests pending, remove it from
+ * the service tree. As a special case, it can be invoked during an
+ * expiration.
+ */
+static void bfq_del_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+			      bool expiration)
+{
+	BUG_ON(!bfq_bfqq_busy(bfqq));
+	BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list));
+
+	bfq_log_bfqq(bfqd, bfqq, "del from busy");
+
+	bfq_clear_bfqq_busy(bfqq);
+
+	BUG_ON(bfqd->busy_queues == 0);
+	bfqd->busy_queues--;
+
+	if (!bfqq->dispatched)
+		bfq_weights_tree_remove(bfqd, &bfqq->entity,
+					&bfqd->queue_weights_tree);
+
+	if (bfqq->wr_coeff > 1)
+		bfqd->wr_busy_queues--;
+
+	bfqg_stats_update_dequeue(bfqq_group(bfqq));
+
+	BUG_ON(bfqq->entity.budget < 0);
+
+	bfq_deactivate_bfqq(bfqd, bfqq, true, expiration);
+
+	BUG_ON(bfqq->entity.budget < 0);
+}
+
+/*
+ * Called when an inactive queue receives a new request.
+ */
+static void bfq_add_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+{
+	BUG_ON(bfq_bfqq_busy(bfqq));
+	BUG_ON(bfqq == bfqd->in_service_queue);
+
+	bfq_log_bfqq(bfqd, bfqq, "add to busy");
+
+	bfq_activate_bfqq(bfqd, bfqq);
+
+	bfq_mark_bfqq_busy(bfqq);
+	bfqd->busy_queues++;
+
+	if (!bfqq->dispatched)
+		if (bfqq->wr_coeff == 1)
+			bfq_weights_tree_add(bfqd, &bfqq->entity,
+					     &bfqd->queue_weights_tree);
+
+	if (bfqq->wr_coeff > 1)
+		bfqd->wr_busy_queues++;
+}
diff --git a/block/bfq.h b/block/bfq.h
new file mode 100644
index 000000000000..bef8244cc03f
--- /dev/null
+++ b/block/bfq.h
@@ -0,0 +1,933 @@
+/*
+ * BFQ v8r7 for 4.9.0: data structures and common functions prototypes.
+ *
+ * Based on ideas and code from CFQ:
+ * Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
+ *
+ * Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
+ *		      Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
+ */
+
+#ifndef _BFQ_H
+#define _BFQ_H
+
+#include <linux/blktrace_api.h>
+#include <linux/hrtimer.h>
+#include <linux/ioprio.h>
+#include <linux/rbtree.h>
+#include <linux/blk-cgroup.h>
+
+#define BFQ_IOPRIO_CLASSES	3
+#define BFQ_CL_IDLE_TIMEOUT	(HZ/5)
+
+#define BFQ_MIN_WEIGHT			1
+#define BFQ_MAX_WEIGHT			1000
+#define BFQ_WEIGHT_CONVERSION_COEFF	10
+
+#define BFQ_DEFAULT_QUEUE_IOPRIO	4
+
+#define BFQ_WEIGHT_LEGACY_DFL	100
+#define BFQ_DEFAULT_GRP_IOPRIO	0
+#define BFQ_DEFAULT_GRP_CLASS	IOPRIO_CLASS_BE
+
+/*
+ * Soft real-time applications are extremely more latency sensitive
+ * than interactive ones. Over-raise the weight of the former to
+ * privilege them against the latter.
+ */
+#define BFQ_SOFTRT_WEIGHT_FACTOR	100
+
+struct bfq_entity;
+
+/**
+ * struct bfq_service_tree - per ioprio_class service tree.
+ *
+ * Each service tree represents a B-WF2Q+ scheduler on its own.  Each
+ * ioprio_class has its own independent scheduler, and so its own
+ * bfq_service_tree.  All the fields are protected by the queue lock
+ * of the containing bfqd.
+ */
+struct bfq_service_tree {
+	/* tree for active entities (i.e., those backlogged) */
+	struct rb_root active;
+	/* tree for idle entities (i.e., not backlogged, with V <= F_i)*/
+	struct rb_root idle;
+
+	struct bfq_entity *first_idle;	/* idle entity with minimum F_i */
+	struct bfq_entity *last_idle;	/* idle entity with maximum F_i */
+
+	u64 vtime; /* scheduler virtual time */
+	/* scheduler weight sum; active and idle entities contribute to it */
+	unsigned long wsum;
+};
+
+/**
+ * struct bfq_sched_data - multi-class scheduler.
+ *
+ * bfq_sched_data is the basic scheduler queue.  It supports three
+ * ioprio_classes, and can be used either as a toplevel queue or as an
+ * intermediate queue on a hierarchical setup.  @next_in_service
+ * points to the active entity of the sched_data service trees that
+ * will be scheduled next. It is used to reduce the number of steps
+ * needed for each hierarchical-schedule update.
+ *
+ * The supported ioprio_classes are the same as in CFQ, in descending
+ * priority order, IOPRIO_CLASS_RT, IOPRIO_CLASS_BE, IOPRIO_CLASS_IDLE.
+ * Requests from higher priority queues are served before all the
+ * requests from lower priority queues; among requests of the same
+ * queue requests are served according to B-WF2Q+.
+ * All the fields are protected by the queue lock of the containing bfqd.
+ */
+struct bfq_sched_data {
+	struct bfq_entity *in_service_entity;  /* entity in service */
+	/* head-of-the-line entity in the scheduler (see comments above) */
+	struct bfq_entity *next_in_service;
+	/* array of service trees, one per ioprio_class */
+	struct bfq_service_tree service_tree[BFQ_IOPRIO_CLASSES];
+	/* last time CLASS_IDLE was served */
+	unsigned long bfq_class_idle_last_service;
+
+};
+
+/**
+ * struct bfq_weight_counter - counter of the number of all active entities
+ *                             with a given weight.
+ */
+struct bfq_weight_counter {
+	unsigned int weight; /* weight of the entities this counter refers to */
+	unsigned int num_active; /* nr of active entities with this weight */
+	/*
+	 * Weights tree member (see bfq_data's @queue_weights_tree and
+	 * @group_weights_tree)
+	 */
+	struct rb_node weights_node;
+};
+
+/**
+ * struct bfq_entity - schedulable entity.
+ *
+ * A bfq_entity is used to represent either a bfq_queue (leaf node in the
+ * cgroup hierarchy) or a bfq_group into the upper level scheduler.  Each
+ * entity belongs to the sched_data of the parent group in the cgroup
+ * hierarchy.  Non-leaf entities have also their own sched_data, stored
+ * in @my_sched_data.
+ *
+ * Each entity stores independently its priority values; this would
+ * allow different weights on different devices, but this
+ * functionality is not exported to userspace by now.  Priorities and
+ * weights are updated lazily, first storing the new values into the
+ * new_* fields, then setting the @prio_changed flag.  As soon as
+ * there is a transition in the entity state that allows the priority
+ * update to take place the effective and the requested priority
+ * values are synchronized.
+ *
+ * Unless cgroups are used, the weight value is calculated from the
+ * ioprio to export the same interface as CFQ.  When dealing with
+ * ``well-behaved'' queues (i.e., queues that do not spend too much
+ * time to consume their budget and have true sequential behavior, and
+ * when there are no external factors breaking anticipation) the
+ * relative weights at each level of the cgroups hierarchy should be
+ * guaranteed.  All the fields are protected by the queue lock of the
+ * containing bfqd.
+ */
+struct bfq_entity {
+	struct rb_node rb_node; /* service_tree member */
+	/* pointer to the weight counter associated with this entity */
+	struct bfq_weight_counter *weight_counter;
+
+	/*
+	 * Flag, true if the entity is on a tree (either the active or
+	 * the idle one of its service_tree) or is in service.
+	 */
+	bool on_st;
+
+	u64 finish; /* B-WF2Q+ finish timestamp (aka F_i) */
+	u64 start;  /* B-WF2Q+ start timestamp (aka S_i) */
+
+	/* tree the entity is enqueued into; %NULL if not on a tree */
+	struct rb_root *tree;
+
+	/*
+	 * minimum start time of the (active) subtree rooted at this
+	 * entity; used for O(log N) lookups into active trees
+	 */
+	u64 min_start;
+
+	/* amount of service received during the last service slot */
+	int service;
+
+	/* budget, used also to calculate F_i: F_i = S_i + @budget / @weight */
+	int budget;
+
+	unsigned int weight;	 /* weight of the queue */
+	unsigned int new_weight; /* next weight if a change is in progress */
+
+	/* original weight, used to implement weight boosting */
+	unsigned int orig_weight;
+
+	/* parent entity, for hierarchical scheduling */
+	struct bfq_entity *parent;
+
+	/*
+	 * For non-leaf nodes in the hierarchy, the associated
+	 * scheduler queue, %NULL on leaf nodes.
+	 */
+	struct bfq_sched_data *my_sched_data;
+	/* the scheduler queue this entity belongs to */
+	struct bfq_sched_data *sched_data;
+
+	/* flag, set to request a weight, ioprio or ioprio_class change  */
+	int prio_changed;
+};
+
+struct bfq_group;
+
+/**
+ * struct bfq_queue - leaf schedulable entity.
+ *
+ * A bfq_queue is a leaf request queue; it can be associated with an
+ * io_context or more, if it  is  async or shared  between  cooperating
+ * processes. @cgroup holds a reference to the cgroup, to be sure that it
+ * does not disappear while a bfqq still references it (mostly to avoid
+ * races between request issuing and task migration followed by cgroup
+ * destruction).
+ * All the fields are protected by the queue lock of the containing bfqd.
+ */
+struct bfq_queue {
+	/* reference counter */
+	int ref;
+	/* parent bfq_data */
+	struct bfq_data *bfqd;
+
+	/* current ioprio and ioprio class */
+	unsigned short ioprio, ioprio_class;
+	/* next ioprio and ioprio class if a change is in progress */
+	unsigned short new_ioprio, new_ioprio_class;
+
+	/*
+	 * Shared bfq_queue if queue is cooperating with one or more
+	 * other queues.
+	 */
+	struct bfq_queue *new_bfqq;
+	/* request-position tree member (see bfq_group's @rq_pos_tree) */
+	struct rb_node pos_node;
+	/* request-position tree root (see bfq_group's @rq_pos_tree) */
+	struct rb_root *pos_root;
+
+	/* sorted list of pending requests */
+	struct rb_root sort_list;
+	/* if fifo isn't expired, next request to serve */
+	struct request *next_rq;
+	/* number of sync and async requests queued */
+	int queued[2];
+	/* number of sync and async requests currently allocated */
+	int allocated[2];
+	/* number of pending metadata requests */
+	int meta_pending;
+	/* fifo list of requests in sort_list */
+	struct list_head fifo;
+
+	/* entity representing this queue in the scheduler */
+	struct bfq_entity entity;
+
+	/* maximum budget allowed from the feedback mechanism */
+	int max_budget;
+	/* budget expiration (in jiffies) */
+	unsigned long budget_timeout;
+
+	/* number of requests on the dispatch list or inside driver */
+	int dispatched;
+
+	unsigned int flags; /* status flags.*/
+
+	/* node for active/idle bfqq list inside parent bfqd */
+	struct list_head bfqq_list;
+
+	/* bit vector: a 1 for each seeky requests in history */
+	u32 seek_history;
+
+	/* node for the device's burst list */
+	struct hlist_node burst_list_node;
+
+	/* position of the last request enqueued */
+	sector_t last_request_pos;
+
+	/* Number of consecutive pairs of request completion and
+	 * arrival, such that the queue becomes idle after the
+	 * completion, but the next request arrives within an idle
+	 * time slice; used only if the queue's IO_bound flag has been
+	 * cleared.
+	 */
+	unsigned int requests_within_timer;
+
+	/* pid of the process owning the queue, used for logging purposes */
+	pid_t pid;
+
+	/*
+	 * Pointer to the bfq_io_cq owning the bfq_queue, set to %NULL
+	 * if the queue is shared.
+	 */
+	struct bfq_io_cq *bic;
+
+	/* current maximum weight-raising time for this queue */
+	unsigned long wr_cur_max_time;
+	/*
+	 * Minimum time instant such that, only if a new request is
+	 * enqueued after this time instant in an idle @bfq_queue with
+	 * no outstanding requests, then the task associated with the
+	 * queue it is deemed as soft real-time (see the comments on
+	 * the function bfq_bfqq_softrt_next_start())
+	 */
+	unsigned long soft_rt_next_start;
+	/*
+	 * Start time of the current weight-raising period if
+	 * the @bfq-queue is being weight-raised, otherwise
+	 * finish time of the last weight-raising period.
+	 */
+	unsigned long last_wr_start_finish;
+	/* factor by which the weight of this queue is multiplied */
+	unsigned int wr_coeff;
+	/*
+	 * Time of the last transition of the @bfq_queue from idle to
+	 * backlogged.
+	 */
+	unsigned long last_idle_bklogged;
+	/*
+	 * Cumulative service received from the @bfq_queue since the
+	 * last transition from idle to backlogged.
+	 */
+	unsigned long service_from_backlogged;
+	/*
+	 * Value of wr start time when switching to soft rt
+	 */
+	unsigned long wr_start_at_switch_to_srt;
+
+	unsigned long split_time; /* time of last split */
+};
+
+/**
+ * struct bfq_ttime - per process thinktime stats.
+ */
+struct bfq_ttime {
+	u64 last_end_request; /* completion time of last request */
+
+	u64 ttime_total; /* total process thinktime */
+	unsigned long ttime_samples; /* number of thinktime samples */
+	u64 ttime_mean; /* average process thinktime */
+
+};
+
+/**
+ * struct bfq_io_cq - per (request_queue, io_context) structure.
+ */
+struct bfq_io_cq {
+	/* associated io_cq structure */
+	struct io_cq icq; /* must be the first member */
+	/* array of two process queues, the sync and the async */
+	struct bfq_queue *bfqq[2];
+	/* associated @bfq_ttime struct */
+	struct bfq_ttime ttime;
+	/* per (request_queue, blkcg) ioprio */
+	int ioprio;
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	uint64_t blkcg_serial_nr; /* the current blkcg serial */
+#endif
+
+	/*
+	 * Snapshot of the idle window before merging; taken to
+	 * remember this value while the queue is merged, so as to be
+	 * able to restore it in case of split.
+	 */
+	bool saved_idle_window;
+	/*
+	 * Same purpose as the previous two fields for the I/O bound
+	 * classification of a queue.
+	 */
+	bool saved_IO_bound;
+
+	/*
+	 * Same purpose as the previous fields for the value of the
+	 * field keeping the queue's belonging to a large burst
+	 */
+	bool saved_in_large_burst;
+	/*
+	 * True if the queue belonged to a burst list before its merge
+	 * with another cooperating queue.
+	 */
+	bool was_in_burst_list;
+
+	/*
+	 * Similar to previous fields: save wr information.
+	 */
+	unsigned long saved_wr_coeff;
+	unsigned long saved_last_wr_start_finish;
+	unsigned long saved_wr_start_at_switch_to_srt;
+	unsigned int saved_wr_cur_max_time;
+};
+
+enum bfq_device_speed {
+	BFQ_BFQD_FAST,
+	BFQ_BFQD_SLOW,
+};
+
+/**
+ * struct bfq_data - per-device data structure.
+ *
+ * All the fields are protected by the @queue lock.
+ */
+struct bfq_data {
+	/* request queue for the device */
+	struct request_queue *queue;
+
+	/* root bfq_group for the device */
+	struct bfq_group *root_group;
+
+	/*
+	 * rbtree of weight counters of @bfq_queues, sorted by
+	 * weight. Used to keep track of whether all @bfq_queues have
+	 * the same weight. The tree contains one counter for each
+	 * distinct weight associated to some active and not
+	 * weight-raised @bfq_queue (see the comments to the functions
+	 * bfq_weights_tree_[add|remove] for further details).
+	 */
+	struct rb_root queue_weights_tree;
+	/*
+	 * rbtree of non-queue @bfq_entity weight counters, sorted by
+	 * weight. Used to keep track of whether all @bfq_groups have
+	 * the same weight. The tree contains one counter for each
+	 * distinct weight associated to some active @bfq_group (see
+	 * the comments to the functions bfq_weights_tree_[add|remove]
+	 * for further details).
+	 */
+	struct rb_root group_weights_tree;
+
+	/*
+	 * Number of bfq_queues containing requests (including the
+	 * queue in service, even if it is idling).
+	 */
+	int busy_queues;
+	/* number of weight-raised busy @bfq_queues */
+	int wr_busy_queues;
+	/* number of queued requests */
+	int queued;
+	/* number of requests dispatched and waiting for completion */
+	int rq_in_driver;
+
+	/*
+	 * Maximum number of requests in driver in the last
+	 * @hw_tag_samples completed requests.
+	 */
+	int max_rq_in_driver;
+	/* number of samples used to calculate hw_tag */
+	int hw_tag_samples;
+	/* flag set to one if the driver is showing a queueing behavior */
+	int hw_tag;
+
+	/* number of budgets assigned */
+	int budgets_assigned;
+
+	/*
+	 * Timer set when idling (waiting) for the next request from
+	 * the queue in service.
+	 */
+	struct hrtimer idle_slice_timer;
+	/* delayed work to restart dispatching on the request queue */
+	struct work_struct unplug_work;
+
+	/* bfq_queue in service */
+	struct bfq_queue *in_service_queue;
+	/* bfq_io_cq (bic) associated with the @in_service_queue */
+	struct bfq_io_cq *in_service_bic;
+
+	/* on-disk position of the last served request */
+	sector_t last_position;
+
+	/* time of last request completion (ns) */
+	u64 last_completion;
+
+	/* time of first rq dispatch in current observation interval (ns) */
+	u64 first_dispatch;
+	/* time of last rq dispatch in current observation interval (ns) */
+	u64 last_dispatch;
+
+	/* beginning of the last budget */
+	ktime_t last_budget_start;
+	/* beginning of the last idle slice */
+	ktime_t last_idling_start;
+
+	/* number of samples in current observation interval */
+	int peak_rate_samples;
+	/* num of samples of seq dispatches in current observation interval */
+	u32 sequential_samples;
+	/* total num of sectors transferred in current observation interval */
+	u64 tot_sectors_dispatched;
+	/* max rq size seen during current observation interval (sectors) */
+	u32 last_rq_max_size;
+	/* time elapsed from first dispatch in current observ. interval (us) */
+	u64 delta_from_first;
+	/* current estimate of device peak rate */
+	u32 peak_rate;
+
+	/* maximum budget allotted to a bfq_queue before rescheduling */
+	int bfq_max_budget;
+
+	/* list of all the bfq_queues active on the device */
+	struct list_head active_list;
+	/* list of all the bfq_queues idle on the device */
+	struct list_head idle_list;
+
+	/*
+	 * Timeout for async/sync requests; when it fires, requests
+	 * are served in fifo order.
+	 */
+	u64 bfq_fifo_expire[2];
+	/* weight of backward seeks wrt forward ones */
+	unsigned int bfq_back_penalty;
+	/* maximum allowed backward seek */
+	unsigned int bfq_back_max;
+	/* maximum idling time */
+	u32 bfq_slice_idle;
+
+	/* user-configured max budget value (0 for auto-tuning) */
+	int bfq_user_max_budget;
+	/*
+	 * Timeout for bfq_queues to consume their budget; used to
+	 * prevent seeky queues from imposing long latencies to
+	 * sequential or quasi-sequential ones (this also implies that
+	 * seeky queues cannot receive guarantees in the service
+	 * domain; after a timeout they are charged for the time they
+	 * have been in service, to preserve fairness among them, but
+	 * without service-domain guarantees).
+	 */
+	unsigned int bfq_timeout;
+
+	/*
+	 * Number of consecutive requests that must be issued within
+	 * the idle time slice to set again idling to a queue which
+	 * was marked as non-I/O-bound (see the definition of the
+	 * IO_bound flag for further details).
+	 */
+	unsigned int bfq_requests_within_timer;
+
+	/*
+	 * Force device idling whenever needed to provide accurate
+	 * service guarantees, without caring about throughput
+	 * issues. CAVEAT: this may even increase latencies, in case
+	 * of useless idling for processes that did stop doing I/O.
+	 */
+	bool strict_guarantees;
+
+	/*
+	 * Last time at which a queue entered the current burst of
+	 * queues being activated shortly after each other; for more
+	 * details about this and the following parameters related to
+	 * a burst of activations, see the comments on the function
+	 * bfq_handle_burst.
+	 */
+	unsigned long last_ins_in_burst;
+	/*
+	 * Reference time interval used to decide whether a queue has
+	 * been activated shortly after @last_ins_in_burst.
+	 */
+	unsigned long bfq_burst_interval;
+	/* number of queues in the current burst of queue activations */
+	int burst_size;
+
+	/* common parent entity for the queues in the burst */
+	struct bfq_entity *burst_parent_entity;
+	/* Maximum burst size above which the current queue-activation
+	 * burst is deemed as 'large'.
+	 */
+	unsigned long bfq_large_burst_thresh;
+	/* true if a large queue-activation burst is in progress */
+	bool large_burst;
+	/*
+	 * Head of the burst list (as for the above fields, more
+	 * details in the comments on the function bfq_handle_burst).
+	 */
+	struct hlist_head burst_list;
+
+	/* if set to true, low-latency heuristics are enabled */
+	bool low_latency;
+	/*
+	 * Maximum factor by which the weight of a weight-raised queue
+	 * is multiplied.
+	 */
+	unsigned int bfq_wr_coeff;
+	/* maximum duration of a weight-raising period (jiffies) */
+	unsigned int bfq_wr_max_time;
+
+	/* Maximum weight-raising duration for soft real-time processes */
+	unsigned int bfq_wr_rt_max_time;
+	/*
+	 * Minimum idle period after which weight-raising may be
+	 * reactivated for a queue (in jiffies).
+	 */
+	unsigned int bfq_wr_min_idle_time;
+	/*
+	 * Minimum period between request arrivals after which
+	 * weight-raising may be reactivated for an already busy async
+	 * queue (in jiffies).
+	 */
+	unsigned long bfq_wr_min_inter_arr_async;
+
+	/* Max service-rate for a soft real-time queue, in sectors/sec */
+	unsigned int bfq_wr_max_softrt_rate;
+	/*
+	 * Cached value of the product R*T, used for computing the
+	 * maximum duration of weight raising automatically.
+	 */
+	u64 RT_prod;
+	/* device-speed class for the low-latency heuristic */
+	enum bfq_device_speed device_speed;
+
+	/* fallback dummy bfqq for extreme OOM conditions */
+	struct bfq_queue oom_bfqq;
+};
+
+enum bfqq_state_flags {
+	BFQ_BFQQ_FLAG_just_created = 0,	/* queue just allocated */
+	BFQ_BFQQ_FLAG_busy,		/* has requests or is in service */
+	BFQ_BFQQ_FLAG_wait_request,	/* waiting for a request */
+	BFQ_BFQQ_FLAG_non_blocking_wait_rq, /*
+					     * waiting for a request
+					     * without idling the device
+					     */
+	BFQ_BFQQ_FLAG_must_alloc,	/* must be allowed rq alloc */
+	BFQ_BFQQ_FLAG_fifo_expire,	/* FIFO checked in this slice */
+	BFQ_BFQQ_FLAG_idle_window,	/* slice idling enabled */
+	BFQ_BFQQ_FLAG_sync,		/* synchronous queue */
+	BFQ_BFQQ_FLAG_IO_bound,		/*
+					 * bfqq has timed-out at least once
+					 * having consumed at most 2/10 of
+					 * its budget
+					 */
+	BFQ_BFQQ_FLAG_in_large_burst,	/*
+					 * bfqq activated in a large burst,
+					 * see comments to bfq_handle_burst.
+					 */
+	BFQ_BFQQ_FLAG_softrt_update,	/*
+					 * may need softrt-next-start
+					 * update
+					 */
+	BFQ_BFQQ_FLAG_coop,		/* bfqq is shared */
+	BFQ_BFQQ_FLAG_split_coop	/* shared bfqq will be split */
+};
+
+#define BFQ_BFQQ_FNS(name)						\
+static void bfq_mark_bfqq_##name(struct bfq_queue *bfqq)		\
+{									\
+	(bfqq)->flags |= (1 << BFQ_BFQQ_FLAG_##name);			\
+}									\
+static void bfq_clear_bfqq_##name(struct bfq_queue *bfqq)		\
+{									\
+	(bfqq)->flags &= ~(1 << BFQ_BFQQ_FLAG_##name);			\
+}									\
+static int bfq_bfqq_##name(const struct bfq_queue *bfqq)		\
+{									\
+	return ((bfqq)->flags & (1 << BFQ_BFQQ_FLAG_##name)) != 0;	\
+}
+
+BFQ_BFQQ_FNS(just_created);
+BFQ_BFQQ_FNS(busy);
+BFQ_BFQQ_FNS(wait_request);
+BFQ_BFQQ_FNS(non_blocking_wait_rq);
+BFQ_BFQQ_FNS(must_alloc);
+BFQ_BFQQ_FNS(fifo_expire);
+BFQ_BFQQ_FNS(idle_window);
+BFQ_BFQQ_FNS(sync);
+BFQ_BFQQ_FNS(IO_bound);
+BFQ_BFQQ_FNS(in_large_burst);
+BFQ_BFQQ_FNS(coop);
+BFQ_BFQQ_FNS(split_coop);
+BFQ_BFQQ_FNS(softrt_update);
+#undef BFQ_BFQQ_FNS
+
+/* Logging facilities. */
+#ifdef CONFIG_BFQ_REDIRECT_TO_CONSOLE
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq);
+static struct blkcg_gq *bfqg_to_blkg(struct bfq_group *bfqg);
+
+#define bfq_log_bfqq(bfqd, bfqq, fmt, args...)	do {			\
+	char __pbuf[128];						\
+									\
+	assert_spin_locked((bfqd)->queue->queue_lock);			\
+	blkg_path(bfqg_to_blkg(bfqq_group(bfqq)), __pbuf, sizeof(__pbuf)); \
+	pr_crit("bfq%d%c %s " fmt "\n", 			\
+		(bfqq)->pid,						\
+		bfq_bfqq_sync((bfqq)) ? 'S' : 'A',			\
+		__pbuf, ##args);					\
+} while (0)
+
+#define bfq_log_bfqg(bfqd, bfqg, fmt, args...)	do {			\
+	char __pbuf[128];						\
+									\
+	blkg_path(bfqg_to_blkg(bfqg), __pbuf, sizeof(__pbuf));		\
+	pr_crit("%s " fmt "\n", __pbuf, ##args);	\
+} while (0)
+
+#else /* CONFIG_BFQ_GROUP_IOSCHED */
+
+#define bfq_log_bfqq(bfqd, bfqq, fmt, args...)		\
+	pr_crit("bfq%d%c " fmt "\n", (bfqq)->pid,		\
+		bfq_bfqq_sync((bfqq)) ? 'S' : 'A',	\
+		##args)
+#define bfq_log_bfqg(bfqd, bfqg, fmt, args...)		do {} while (0)
+
+#endif /* CONFIG_BFQ_GROUP_IOSCHED */
+
+#define bfq_log(bfqd, fmt, args...) \
+	pr_crit("bfq " fmt "\n", ##args)
+
+#else /* CONFIG_BFQ_REDIRECT_TO_CONSOLE */
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq);
+static struct blkcg_gq *bfqg_to_blkg(struct bfq_group *bfqg);
+
+#define bfq_log_bfqq(bfqd, bfqq, fmt, args...)	do {			\
+	char __pbuf[128];						\
+									\
+	assert_spin_locked((bfqd)->queue->queue_lock);			\
+	blkg_path(bfqg_to_blkg(bfqq_group(bfqq)), __pbuf, sizeof(__pbuf)); \
+	blk_add_trace_msg((bfqd)->queue, "bfq%d%c %s " fmt, \
+			  (bfqq)->pid,			  \
+			  bfq_bfqq_sync((bfqq)) ? 'S' : 'A',	\
+			  __pbuf, ##args);				\
+} while (0)
+
+#define bfq_log_bfqg(bfqd, bfqg, fmt, args...)	do {			\
+	char __pbuf[128];						\
+									\
+	blkg_path(bfqg_to_blkg(bfqg), __pbuf, sizeof(__pbuf));		\
+	blk_add_trace_msg((bfqd)->queue, "%s " fmt, __pbuf, ##args);	\
+} while (0)
+
+#else /* CONFIG_BFQ_GROUP_IOSCHED */
+
+#define bfq_log_bfqq(bfqd, bfqq, fmt, args...)	\
+	blk_add_trace_msg((bfqd)->queue, "bfq%d%c " fmt, (bfqq)->pid,	\
+			bfq_bfqq_sync((bfqq)) ? 'S' : 'A',		\
+				##args)
+#define bfq_log_bfqg(bfqd, bfqg, fmt, args...)		do {} while (0)
+
+#endif /* CONFIG_BFQ_GROUP_IOSCHED */
+
+#define bfq_log(bfqd, fmt, args...) \
+	blk_add_trace_msg((bfqd)->queue, "bfq " fmt, ##args)
+#endif /* CONFIG_BFQ_REDIRECT_TO_CONSOLE */
+
+/* Expiration reasons. */
+enum bfqq_expiration {
+	BFQ_BFQQ_TOO_IDLE = 0,		/*
+					 * queue has been idling for
+					 * too long
+					 */
+	BFQ_BFQQ_BUDGET_TIMEOUT,	/* budget took too long to be used */
+	BFQ_BFQQ_BUDGET_EXHAUSTED,	/* budget consumed */
+	BFQ_BFQQ_NO_MORE_REQUESTS,	/* the queue has no more requests */
+	BFQ_BFQQ_PREEMPTED		/* preemption in progress */
+};
+
+
+struct bfqg_stats {
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	/* number of ios merged */
+	struct blkg_rwstat		merged;
+	/* total time spent on device in ns, may not be accurate w/ queueing */
+	struct blkg_rwstat		service_time;
+	/* total time spent waiting in scheduler queue in ns */
+	struct blkg_rwstat		wait_time;
+	/* number of IOs queued up */
+	struct blkg_rwstat		queued;
+	/* total disk time and nr sectors dispatched by this group */
+	struct blkg_stat		time;
+	/* sum of number of ios queued across all samples */
+	struct blkg_stat		avg_queue_size_sum;
+	/* count of samples taken for average */
+	struct blkg_stat		avg_queue_size_samples;
+	/* how many times this group has been removed from service tree */
+	struct blkg_stat		dequeue;
+	/* total time spent waiting for it to be assigned a timeslice. */
+	struct blkg_stat		group_wait_time;
+	/* time spent idling for this blkcg_gq */
+	struct blkg_stat		idle_time;
+	/* total time with empty current active q with other requests queued */
+	struct blkg_stat		empty_time;
+	/* fields after this shouldn't be cleared on stat reset */
+	uint64_t			start_group_wait_time;
+	uint64_t			start_idle_time;
+	uint64_t			start_empty_time;
+	uint16_t			flags;
+#endif
+};
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+/*
+ * struct bfq_group_data - per-blkcg storage for the blkio subsystem.
+ *
+ * @ps: @blkcg_policy_storage that this structure inherits
+ * @weight: weight of the bfq_group
+ */
+struct bfq_group_data {
+	/* must be the first member */
+	struct blkcg_policy_data pd;
+
+	unsigned int weight;
+};
+
+/**
+ * struct bfq_group - per (device, cgroup) data structure.
+ * @entity: schedulable entity to insert into the parent group sched_data.
+ * @sched_data: own sched_data, to contain child entities (they may be
+ *              both bfq_queues and bfq_groups).
+ * @bfqd: the bfq_data for the device this group acts upon.
+ * @async_bfqq: array of async queues for all the tasks belonging to
+ *              the group, one queue per ioprio value per ioprio_class,
+ *              except for the idle class that has only one queue.
+ * @async_idle_bfqq: async queue for the idle class (ioprio is ignored).
+ * @my_entity: pointer to @entity, %NULL for the toplevel group; used
+ *             to avoid too many special cases during group creation/
+ *             migration.
+ * @active_entities: number of active entities belonging to the group;
+ *                   unused for the root group. Used to know whether there
+ *                   are groups with more than one active @bfq_entity
+ *                   (see the comments to the function
+ *                   bfq_bfqq_may_idle()).
+ * @rq_pos_tree: rbtree sorted by next_request position, used when
+ *               determining if two or more queues have interleaving
+ *               requests (see bfq_find_close_cooperator()).
+ *
+ * Each (device, cgroup) pair has its own bfq_group, i.e., for each cgroup
+ * there is a set of bfq_groups, each one collecting the lower-level
+ * entities belonging to the group that are acting on the same device.
+ *
+ * Locking works as follows:
+ *    o @bfqd is protected by the queue lock, RCU is used to access it
+ *      from the readers.
+ *    o All the other fields are protected by the @bfqd queue lock.
+ */
+struct bfq_group {
+	/* must be the first member */
+	struct blkg_policy_data pd;
+
+	struct bfq_entity entity;
+	struct bfq_sched_data sched_data;
+
+	void *bfqd;
+
+	struct bfq_queue *async_bfqq[2][IOPRIO_BE_NR];
+	struct bfq_queue *async_idle_bfqq;
+
+	struct bfq_entity *my_entity;
+
+	int active_entities;
+
+	struct rb_root rq_pos_tree;
+
+	struct bfqg_stats stats;
+};
+
+#else
+struct bfq_group {
+	struct bfq_sched_data sched_data;
+
+	struct bfq_queue *async_bfqq[2][IOPRIO_BE_NR];
+	struct bfq_queue *async_idle_bfqq;
+
+	struct rb_root rq_pos_tree;
+};
+#endif
+
+static struct bfq_queue *bfq_entity_to_bfqq(struct bfq_entity *entity);
+
+static unsigned int bfq_class_idx(struct bfq_entity *entity)
+{
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+	return bfqq ? bfqq->ioprio_class - 1 :
+		BFQ_DEFAULT_GRP_CLASS - 1;
+}
+
+static struct bfq_service_tree *
+bfq_entity_service_tree(struct bfq_entity *entity)
+{
+	struct bfq_sched_data *sched_data = entity->sched_data;
+	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	unsigned int idx = bfq_class_idx(entity);
+
+	BUG_ON(idx >= BFQ_IOPRIO_CLASSES);
+	BUG_ON(sched_data == NULL);
+
+	if (bfqq)
+		bfq_log_bfqq(bfqq->bfqd, bfqq,
+			     "entity_service_tree %p %d",
+			     sched_data->service_tree + idx, idx);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+	else {
+		struct bfq_group *bfqg =
+			container_of(entity, struct bfq_group, entity);
+
+		bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+			     "entity_service_tree %p %d",
+			     sched_data->service_tree + idx, idx);
+	}
+#endif
+	return sched_data->service_tree + idx;
+}
+
+static struct bfq_queue *bic_to_bfqq(struct bfq_io_cq *bic, bool is_sync)
+{
+	return bic->bfqq[is_sync];
+}
+
+static void bic_set_bfqq(struct bfq_io_cq *bic, struct bfq_queue *bfqq,
+			 bool is_sync)
+{
+	bic->bfqq[is_sync] = bfqq;
+}
+
+static struct bfq_data *bic_to_bfqd(struct bfq_io_cq *bic)
+{
+	return bic->icq.q->elevator->elevator_data;
+}
+
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+
+static struct bfq_group *bfq_bfqq_to_bfqg(struct bfq_queue *bfqq)
+{
+	struct bfq_entity *group_entity = bfqq->entity.parent;
+
+	if (!group_entity)
+		group_entity = &bfqq->bfqd->root_group->entity;
+
+	return container_of(group_entity, struct bfq_group, entity);
+}
+
+#else
+
+static struct bfq_group *bfq_bfqq_to_bfqg(struct bfq_queue *bfqq)
+{
+	return bfqq->bfqd->root_group;
+}
+
+#endif
+
+static void bfq_check_ioprio_change(struct bfq_io_cq *bic, struct bio *bio);
+static void bfq_put_queue(struct bfq_queue *bfqq);
+static void bfq_dispatch_insert(struct request_queue *q, struct request *rq);
+static struct bfq_queue *bfq_get_queue(struct bfq_data *bfqd,
+				       struct bio *bio, bool is_sync,
+				       struct bfq_io_cq *bic);
+static void bfq_end_wr_async_queues(struct bfq_data *bfqd,
+				    struct bfq_group *bfqg);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static void bfq_put_async_queues(struct bfq_data *bfqd, struct bfq_group *bfqg);
+#endif
+static void bfq_exit_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq);
+
+#endif /* _BFQ_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 01a696b0a4d3..29d537ddc261 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -48,7 +48,7 @@ struct rq_wb;
  * Maximum number of blkcg policies allowed to be registered concurrently.
  * Defined here to simplify include dependency.
  */
-#define BLKCG_MAX_POLS		2
+#define BLKCG_MAX_POLS		3
 
 typedef void (rq_end_io_fn)(struct request *, int);